Linux内核源代码情景分析-进程间通信-管道

最新推荐文章于 2023-03-26 13:45:00 发布

jltxgcy

最新推荐文章于 2023-03-26 13:45:00 发布

阅读量1.7k

点赞数

分类专栏： Linux内核源代码情景分析

本文链接：https://blog.csdn.net/jltxgcy/article/details/44945549

版权

Linux内核源代码情景分析专栏收录该内容

44 篇文章 7 订阅

订阅专栏

一、我们先来介绍一下init_pipe_fs。

static DECLARE_FSTYPE(pipe_fs_type, "pipefs", pipefs_read_super,
	FS_NOMOUNT|FS_SINGLE);

static int __init init_pipe_fs(void)
{
	int err = register_filesystem(&pipe_fs_type);
	if (!err) {
		pipe_mnt = kern_mount(&pipe_fs_type);
		err = PTR_ERR(pipe_mnt);
		if (IS_ERR(pipe_mnt))
			unregister_filesystem(&pipe_fs_type);
		else
			err = 0;
	}
	return err;
}

struct vfsmount *kern_mount(struct file_system_type *type)
{
	kdev_t dev = get_unnamed_dev();
	struct super_block *sb;
	struct vfsmount *mnt;
	if (!dev)
		return ERR_PTR(-EMFILE);
	sb = read_super(dev, NULL, type, 0, NULL, 0);
	if (!sb) {
		put_unnamed_dev(dev);
		return ERR_PTR(-EINVAL);
	}
	mnt = add_vfsmnt(NULL, sb->s_root, NULL);
	if (!mnt) {
		kill_super(sb, 0);
		return ERR_PTR(-ENOMEM);
	}
	type->kern_mnt = mnt;
	return mnt;
}

static struct super_block * read_super(kdev_t dev, struct block_device *bdev,
				       struct file_system_type *type, int flags,
				       void *data, int silent)
{
	struct super_block * s;
	s = get_empty_super();
	if (!s)
		goto out;
	s->s_dev = dev;
	s->s_bdev = bdev;
	s->s_flags = flags;
	s->s_dirt = 0;
	sema_init(&s->s_vfs_rename_sem,1);
	sema_init(&s->s_nfsd_free_path_sem,1);
	s->s_type = type;
	sema_init(&s->s_dquot.dqio_sem, 1);
	sema_init(&s->s_dquot.dqoff_sem, 1);
	s->s_dquot.flags = 0;
	lock_super(s);
	if (!type->read_super(s, data, silent))//指向pipefs_read_super
		goto out_fail;
	unlock_super(s);
	/* tell bdcache that we are going to keep this one */
	if (bdev)
		atomic_inc(&bdev->bd_count);
out:
	return s;

out_fail:
	s->s_dev = 0;
	s->s_bdev = 0;
	s->s_type = NULL;
	unlock_super(s);
	return NULL;
}

type->read_super指向了pipefs_read_super，代码如下：

static struct super_block * pipefs_read_super(struct super_block *sb, void *data, int silent)
{
	struct inode *root = new_inode(sb);//分配根节点的inode结构
	if (!root)
		return NULL;
	root->i_mode = S_IFDIR | S_IRUSR | S_IWUSR;
	root->i_uid = root->i_gid = 0;
	root->i_atime = root->i_mtime = root->i_ctime = CURRENT_TIME;
	sb->s_blocksize = 1024;
	sb->s_blocksize_bits = 10;
	sb->s_magic = PIPEFS_MAGIC;
	sb->s_op	= &pipefs_ops;
	sb->s_root = d_alloc(NULL, &(const struct qstr) { "pipe:", 5, 0 });//分配根节点的dentry结构
	if (!sb->s_root) {
		iput(root);
		return NULL;
	}
	sb->s_root->d_sb = sb;
	sb->s_root->d_parent = sb->s_root;
	d_instantiate(sb->s_root, root);//根节点的dentry和根节点的inode结构相连
	return sb;
}

二、我们来看应用管道通信的相关代码，假设系统中只有这两个进程：

#include <stdio.h>
#include <unistd.h>
int main()
{
	int n,fd[2];
	pid_t pid;
	int i,j;
	char str1[]="ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE
	ABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDEABCDE";

	char str2[512];
	if(pipe(fd)<0)//fd[0]是读端，fd[1]是写端
	{
		printf("pipe error\n");
		return -1;
	}
	
	if((pid = fork())<0)//父子进程都有了同样file结构
	{
		printf("fork error\n");
		return -1;
	}else if(pid > 0)
	{
		close(fd[0]);//父进程做为写端，关闭读端
	        write(fd[1],str1,strlen(str1));
	}
	else
	{
		close(fd[1]);//子进程做为读端，关闭写端
		read(fd[0],str2,strlen(str2));
	}
}

pipe的系统调用是sys_pipe()，代码如下：

asmlinkage int sys_pipe(unsigned long * fildes)
{
	int fd[2];
	int error;

	error = do_pipe(fd);//fd[]返回代表着管道两端的两个已打开文件号
	if (!error) {
		if (copy_to_user(fildes, fd, 2*sizeof(int)))//将数组fd[]复制到用户空间
			error = -EFAULT;
	}
	return error;
}

int do_pipe(int *fd)
{
	struct qstr this;
	char name[32];
	struct dentry *dentry;
	struct inode * inode;
	struct file *f1, *f2;
	int error;
	int i,j;

	error = -ENFILE;
	f1 = get_empty_filp();//获取读端空的file结构
	if (!f1)
		goto no_files;

	f2 = get_empty_filp();//获取写端空的file结构
	if (!f2)
		goto close_f1;

	inode = get_pipe_inode();//获取读端和写端共同使用的管道节点的inode结构
	if (!inode)
		goto close_f12;

	error = get_unused_fd();//获得读端文件号
	if (error < 0)
		goto close_f12_inode;
	i = error;

	error = get_unused_fd();//获得写端文件号
	if (error < 0)
		goto close_f12_inode_i;
	j = error;

	error = -ENOMEM;
	sprintf(name, "[%lu]", inode->i_ino);
	this.name = name;
	this.len = strlen(name);
	this.hash = inode->i_ino; /* will go */
	dentry = d_alloc(pipe_mnt->mnt_sb->s_root, &this);//分配管道节点的dentry结构
	if (!dentry)
		goto close_f12_inode_i_j;
	dentry->d_op = &pipefs_dentry_operations;
	d_add(dentry, inode);//互相关联
	f1->f_vfsmnt = f2->f_vfsmnt = mntget(mntget(pipe_mnt));
	f1->f_dentry = f2->f_dentry = dget(dentry);//f_dentry指向所打开文件的目录项dentry数据结构

	/* read file */
	f1->f_pos = f2->f_pos = 0;
	f1->f_flags = O_RDONLY;
	f1->f_op = &read_pipe_fops;//读端的f_op
	f1->f_mode = 1;
	f1->f_version = 0;

	/* write file */
	f2->f_flags = O_WRONLY;
	f2->f_op = &write_pipe_fops;//写端的f_op
	f2->f_mode = 2;
	f2->f_version = 0;

	fd_install(i, f1);//f1安装到current->files[i]上
	fd_install(j, f2);//f2安装到current->files[j]上
	fd[0] = i;
	fd[1] = j;
	return 0;

close_f12_inode_i_j:
	put_unused_fd(j);
close_f12_inode_i:
	put_unused_fd(i);
close_f12_inode:
	free_page((unsigned long) PIPE_BASE(*inode));
	kfree(inode->i_pipe);
	inode->i_pipe = NULL;
	iput(inode);
close_f12:
	put_filp(f2);
close_f1:
	put_filp(f1);
no_files:
	return error;	
}

get_pipe_inode，获取读端和写端共同使用的管道节点的inode结构，代码如下：

static struct inode * get_pipe_inode(void)
{
	struct inode *inode = get_empty_inode();

	if (!inode)
		goto fail_inode;

	if(!pipe_new(inode))//分配所需要的缓冲区
		goto fail_iput;
	PIPE_READERS(*inode) = PIPE_WRITERS(*inode) = 1;
	inode->i_fop = &rdwr_pipe_fops;//这里以后会用到
	inode->i_sb = pipe_mnt->mnt_sb;

	/*
	 * Mark the inode dirty from the very beginning,
	 * that way it will never be moved to the dirty
	 * list because "mark_inode_dirty()" will think
	 * that it already _is_ on the dirty list.
	 */
	inode->i_state = I_DIRTY;
	inode->i_mode = S_IFIFO | S_IRUSR | S_IWUSR;
	inode->i_uid = current->fsuid;
	inode->i_gid = current->fsgid;
	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
	inode->i_blksize = PAGE_SIZE;
	return inode;

fail_iput:
	iput(inode);
fail_inode:
	return NULL;
}

pipe_new，分配所需要的缓冲区，代码如下：

struct inode* pipe_new(struct inode* inode)
{
	unsigned long page;

	page = __get_free_page(GFP_USER);
	if (!page)
		return NULL;

	inode->i_pipe = kmalloc(sizeof(struct pipe_inode_info), GFP_KERNEL);//i_pipe是指向一个pipe_inode_info数据结构的指针
	if (!inode->i_pipe)
		goto fail_page;

	init_waitqueue_head(PIPE_WAIT(*inode));
	PIPE_BASE(*inode) = (char*) page;//(inode).i_pipe->base指向了页面的起始地址
	PIPE_START(*inode) = PIPE_LEN(*inode) = 0;
	PIPE_READERS(*inode) = PIPE_WRITERS(*inode) = 0;
	PIPE_WAITING_READERS(*inode) = PIPE_WAITING_WRITERS(*inode) = 0;
	PIPE_RCOUNTER(*inode) = PIPE_WCOUNTER(*inode) = 1;

	return inode;
fail_page:
	free_page(page);
	return NULL;
}

pipe_inode_info结构如下：

struct pipe_inode_info {
	wait_queue_head_t wait;
	char *base;
	unsigned int start;
	unsigned int readers;
	unsigned int writers;
	unsigned int waiting_readers;
	unsigned int waiting_writers;
	unsigned int r_counter;
	unsigned int w_counter;
};

pipe_new里面宏定义如下：

#define PIPE_SEM(inode)		(&(inode).i_sem)
#define PIPE_WAIT(inode)	(&(inode).i_pipe->wait)
#define PIPE_BASE(inode)	((inode).i_pipe->base)
#define PIPE_START(inode)	((inode).i_pipe->start)
#define PIPE_LEN(inode)		((inode).i_size)
#define PIPE_READERS(inode)	((inode).i_pipe->readers)
#define PIPE_WRITERS(inode)	((inode).i_pipe->writers)
#define PIPE_WAITING_READERS(inode)	((inode).i_pipe->waiting_readers)
#define PIPE_WAITING_WRITERS(inode)	((inode).i_pipe->waiting_writers)
#define PIPE_RCOUNTER(inode)	((inode).i_pipe->r_counter)
#define PIPE_WCOUNTER(inode)	((inode).i_pipe->w_counter)

#define PIPE_EMPTY(inode)	(PIPE_LEN(inode) == 0)
#define PIPE_FULL(inode)	(PIPE_LEN(inode) == PIPE_SIZE)
#define PIPE_FREE(inode)	(PIPE_SIZE - PIPE_LEN(inode))
#define PIPE_END(inode)	((PIPE_START(inode) + PIPE_LEN(inode)) & (PIPE_SIZE-1))
#define PIPE_MAX_RCHUNK(inode)	(PIPE_SIZE - PIPE_START(inode))
#define PIPE_MAX_WCHUNK(inode)	(PIPE_SIZE - PIPE_END(inode))

sys_pipe继续执行，对于管道的两端来说，管道是单向的，所以其f1一端设置成"只读"，而另一端则设置成"只写"。同时，两端的文件操作也分别设置成read_pipe_fops和write_pipe_fops。

struct file_operations read_pipe_fops = {
	llseek:		pipe_lseek,
	read:		pipe_read,
	write:		bad_pipe_w,
	poll:		pipe_poll,
	ioctl:		pipe_ioctl,
	open:		pipe_read_open,
	release:	pipe_read_release,
};

struct file_operations write_pipe_fops = {
	llseek:		pipe_lseek,
	read:		bad_pipe_r,
	write:		pipe_write,
	poll:		pipe_poll,
	ioctl:		pipe_ioctl,
	open:		pipe_write_open,
	release:	pipe_write_release,
};

读者可能会问，前面管道节点的inode数据结构将指针i_fop设置成指向rdwr_pipe_fops，那显然是双向的。这里是不是有矛盾吗？其实不然，对于代表着管道两端的两个已打开文件来说，一个只能写而另一个只能读，这是事情的一个方面。可是另一方面，这两个逻辑上的已打开文件都通向同一个inode、同一个物理上存在的"文件"，即用做管道的缓冲区；显然这个缓冲区应该既支持写又支持读，这样才能使数据流通。

struct file_operations rdwr_pipe_fops = {
	llseek:		pipe_lseek,
	read:		pipe_read,
	write:		pipe_write,
	poll:		pipe_poll,
	ioctl:		pipe_ioctl,
	open:		pipe_rdwr_open,
	release:	pipe_rdwr_release,
};

fork，父子进程都有相同的file结构，因为copy_file中有如下代码：

new_fds = newf->fd;
for (i = open_files; i != 0; i--) {  
        struct file *f = *old_fds++;  
        if (f)  
            get_file(f);  
        *new_fds++ = f;  
    }  
 tsk->files = newf;

我们假设父进程先执行，并且关闭了读端，执行write(fd[1],str1,strlen(str1))，映射到内核，sys_write，代码如下：

asmlinkage ssize_t sys_write(unsigned int fd, const char * buf, size_t count)
{
	ssize_t ret;
	struct file * file;

	ret = -EBADF;
	file = fget(fd);
	if (file) {
		if (file->f_mode & FMODE_WRITE) {
			struct inode *inode = file->f_dentry->d_inode;
			ret = locks_verify_area(FLOCK_VERIFY_WRITE, inode, file,
				file->f_pos, count);
			if (!ret) {
				ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
				ret = -EINVAL;
				if (file->f_op && (write = file->f_op->write) != NULL)
					ret = write(file, buf, count, &file->f_pos);//pipe_write
			}
		}
		if (ret > 0)
			inode_dir_notify(file->f_dentry->d_parent->d_inode,
				DN_MODIFY);
		fput(file);
	}
	return ret;
}

write(file, buf, count, &file->f_pos)调用pipe_write (file, buf, count, &file->f_pos)。

static ssize_t
pipe_write(struct file *filp, const char *buf, size_t count, loff_t *ppos)
{
	struct inode *inode = filp->f_dentry->d_inode;
	ssize_t free, written, ret;

	/* Seeks are not allowed on pipes.  */
	ret = -ESPIPE;
	written = 0;
	if (ppos != &filp->f_pos)
		goto out_nolock;

	/* Null write succeeds.  */
	ret = 0;
	if (count == 0)
		goto out_nolock;

	ret = -ERESTARTSYS;
	if (down_interruptible(PIPE_SEM(*inode)))
		goto out_nolock;

	/* No readers yields SIGPIPE.  */
	if (!PIPE_READERS(*inode))
		goto sigpipe;

	/* If count <= PIPE_BUF, we have to make it atomic.  */
	free = (count <= PIPE_BUF ? count : 1);//如果要写入的字节数大于整个缓冲区的大小，那么free为1

	/* Wait, or check for, available space.  */
	if (filp->f_flags & O_NONBLOCK) {
		ret = -EAGAIN;
		if (PIPE_FREE(*inode) < free)
			goto out;
	} else {
		while (PIPE_FREE(*inode) < free) {//缓冲区剩余空间小于要写入的字节数，如果free为1，表示只要有一个字节的剩余空间，就不需要睡眠
			PIPE_WAITING_WRITERS(*inode)++;//waiting_writers++
			pipe_wait(inode);//那么就要睡眠等待
			PIPE_WAITING_WRITERS(*inode)--;
			ret = -ERESTARTSYS;
			if (signal_pending(current))
				goto out;

			if (!PIPE_READERS(*inode))
				goto sigpipe;
		}
	}

	/* Copy into available space.  */
	ret = -EFAULT;
	while (count > 0) {//如果缓冲区剩余空间大于要写入的字节数
		int space;
		char *pipebuf = PIPE_BASE(*inode) + PIPE_END(*inode);
		ssize_t chars = PIPE_MAX_WCHUNK(*inode);

		if ((space = PIPE_FREE(*inode)) != 0) {//如果没有剩余空间了，那么就只说明，要写的字节大于缓冲区的总大小，执行下面的do_while循环
			if (chars > count)
				chars = count;
			if (chars > space)
				chars = space;

			if (copy_from_user(pipebuf, buf, chars))
				goto out;

			written += chars;
			PIPE_LEN(*inode) += chars;
			count -= chars;
			buf += chars;
			space = PIPE_FREE(*inode);
			continue;//由于是缓冲区是一个循环的页面，如果一次写操作，跨过页面开始位置，要分两次写,continue如果count>0，就表示分两次写，如果count不大于0，说明分一次写，并且已经写完了
		}

		ret = written;
		if (filp->f_flags & O_NONBLOCK)
			break;

		do {
			/*
			 * Synchronous wake-up: it knows that this process
			 * is going to give up this CPU, so it doesnt have
			 * to do idle reschedules.
			 */
			wake_up_interruptible_sync(PIPE_WAIT(*inode));//唤醒读端进程
			PIPE_WAITING_WRITERS(*inode)++;//waiting_writers++
			pipe_wait(inode);//写端进程睡眠等待
			PIPE_WAITING_WRITERS(*inode)--;
			if (signal_pending(current))
				goto out;
			if (!PIPE_READERS(*inode))
				goto sigpipe;
		} while (!PIPE_FREE(*inode));//只要有一个字节的剩余空间，就退出do_while循环，再进行一次外部while循环
		ret = -EFAULT;
	}

	/* Signal readers asynchronously that there is more data.  */
	wake_up_interruptible(PIPE_WAIT(*inode));//如果分一次写，分两次写，是不会执行上面的do_while循环的，但也要唤醒读端进程

	inode->i_ctime = inode->i_mtime = CURRENT_TIME;
	mark_inode_dirty(inode);

out:
	up(PIPE_SEM(*inode));
out_nolock:
	if (written)
		ret = written;
	return ret;

sigpipe:
	if (written)
		goto out;
	up(PIPE_SEM(*inode));
	send_sig(SIGPIPE, current, 0);
	return -EPIPE;
}

pipe_wait，睡眠等待，代码如下：

void pipe_wait(struct inode * inode)
{
	DECLARE_WAITQUEUE(wait, current);//把当前进程的task_struct结构和wait_queue连在一起，见下面代码
	current->state = TASK_INTERRUPTIBLE;//当前进程设置为可中断等待状态
	add_wait_queue(PIPE_WAIT(*inode), &wait);//把wait加入到(inode).i_pipe->wait
	up(PIPE_SEM(*inode));
	schedule();//切换进程
	remove_wait_queue(PIPE_WAIT(*inode), &wait);
	current->state = TASK_RUNNING;
	down(PIPE_SEM(*inode));
}

#define DECLARE_WAITQUEUE(wait, current) \
                              struct wait_queue wait = { current, NULL }

void add_wait_queue(wait_queue_head_t *q, wait_queue_t * wait)
{
	unsigned long flags;

	wq_write_lock_irqsave(&q->lock, flags);
	wait->flags = 0;
	__add_wait_queue(q, wait);
	wq_write_unlock_irqrestore(&q->lock, flags);
}

static inline void __add_wait_queue(wait_queue_head_t *head, wait_queue_t *new)
{
        ......
	list_add(&new->task_list, &head->task_list);
}

总结一下：

1、如果剩余空间不足，那么就马上睡眠等待；

2、如果剩余空间足够，分一次写或者分两次写后，唤醒读端进程，程序返回；

3、如果剩余空间足够，但是要写入的字节数大于缓冲区大小，那么也要唤醒读端进程，并睡眠等待。

读和写都是往一个循环的页面，读和写内容的，如下图：

然后子进程开始执行，并且关闭了写端，执行read(fd[0],str2,strlen(str2))，映射到内核，sys_read，代码如下：

asmlinkage ssize_t sys_read(unsigned int fd, char * buf, size_t count)
{
	ssize_t ret;
	struct file * file;

	ret = -EBADF;
	file = fget(fd);
	if (file) {
		if (file->f_mode & FMODE_READ) {
			ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode,
						file, file->f_pos, count);
			if (!ret) {
				ssize_t (*read)(struct file *, char *, size_t, loff_t *);
				ret = -EINVAL;
				if (file->f_op && (read = file->f_op->read) != NULL)
					ret = read(file, buf, count, &file->f_pos);//pipe_read
			}
		}
		if (ret > 0)
			inode_dir_notify(file->f_dentry->d_parent->d_inode,
				DN_ACCESS);
		fput(file);
	}
	return ret;
}

read(file, buf, count, &file->f_pos)指向pipe_read (file, buf, count, &file->f_pos)，代码如下：

static ssize_t
pipe_read(struct file *filp, char *buf, size_t count, loff_t *ppos)
{
	struct inode *inode = filp->f_dentry->d_inode;
	ssize_t size, read, ret;

	/* Seeks are not allowed on pipes.  */
	ret = -ESPIPE;
	read = 0;
	if (ppos != &filp->f_pos)
		goto out_nolock;

	/* Always return 0 on null read.  */
	ret = 0;
	if (count == 0)
		goto out_nolock;

	/* Get the pipe semaphore */
	ret = -ERESTARTSYS;
	if (down_interruptible(PIPE_SEM(*inode)))
		goto out_nolock;

	if (PIPE_EMPTY(*inode)) {
do_more_read:
		ret = 0;
		if (!PIPE_WRITERS(*inode))
			goto out;

		ret = -EAGAIN;
		if (filp->f_flags & O_NONBLOCK)
			goto out;

		for (;;) {//如果缓冲区没有字节可读，那么就睡眠等待
			PIPE_WAITING_READERS(*inode)++;//waiting_readers++
			pipe_wait(inode);
			PIPE_WAITING_READERS(*inode)--;
			ret = -ERESTARTSYS;
			if (signal_pending(current))
				goto out;
			ret = 0;
			if (!PIPE_EMPTY(*inode))
				break;
			if (!PIPE_WRITERS(*inode))
				goto out;
		}
	}

	/* Read what data is available.  */
	ret = -EFAULT;
	while (count > 0 && (size = PIPE_LEN(*inode))) {//如果缓冲区中有字节，分一次或者两次读完缓冲区的字节
		char *pipebuf = PIPE_BASE(*inode) + PIPE_START(*inode);
		ssize_t chars = PIPE_MAX_RCHUNK(*inode);

		if (chars > count)
			chars = count;
		if (chars > size)
			chars = size;

		if (copy_to_user(buf, pipebuf, chars))
			goto out;

		read += chars;
		PIPE_START(*inode) += chars;
		PIPE_START(*inode) &= (PIPE_SIZE - 1);
		PIPE_LEN(*inode) -= chars;
		count -= chars;
		buf += chars;
	}

	/* Cache behaviour optimization */
	if (!PIPE_LEN(*inode))
		PIPE_START(*inode) = 0;

	if (count && PIPE_WAITING_WRITERS(*inode) && !(filp->f_flags & O_NONBLOCK)) {//如果count大于0，并且有等待写的进程，那么说明count要读的字节数大于缓冲区现有的字节数，或者大于缓冲区的总大小，要睡眠等待，并唤醒写端进程
		/*
		 * We know that we are going to sleep: signal
		 * writers synchronously that there is more
		 * room.
		 */
		wake_up_interruptible_sync(PIPE_WAIT(*inode));//唤醒写端进程
		if (!PIPE_EMPTY(*inode))
			BUG();
		goto do_more_read;//返回到do_more_read睡眠等待
	}
	/* Signal writers asynchronously that there is more room.  */
	wake_up_interruptible(PIPE_WAIT(*inode));//如果count为0，说明分一次或者分两次读完了所需要的字节数，那么也要唤醒写端进程

	ret = read;
out:
	up(PIPE_SEM(*inode));
out_nolock:
	if (read)
		ret = read;
	return ret;
}

总结一下：

1、如果没有可读的字节，那么就马上睡眠等待；

2、如果有可读的字节，分一次写或者分两次写后，唤醒写端进程，程序返回；

3、如果又可读的字节，但是要读入的字节数大于缓冲区现有的字节数，或者大于缓冲区的总大小，那么也要唤醒写端进程，并睡眠等待。

jltxgcy

关注

0
点赞
踩
2

收藏

觉得还不错? 一键收藏
0
评论
Linux内核源代码情景分析-进程间通信-管道

一、我们先来介绍一下init_pipe_fs。static DECLARE_FSTYPE(pipe_fs_type, "pipefs", pipefs_read_super, FS_NOMOUNT|FS_SINGLE);static int __init init_pipe_fs(void){ int err = register_filesystem(&pipe_fs_type); if
复制链接

扫一扫

专栏目录