首先需要对环境进行配置，即配置core文件的输出：
运行命令：ulimit -c unlimited
该命令用于设置core文件大小不限制
修改/etc/sysctl.conf文件，在文件末尾添加下面一行
kernel.core_pattern=/tmp/core-%e
并修改kernel.core_uses_pid = 1 为
kernel.core_uses_pid = 0 这样core文件的格式就是
core-可执行文件的名字，这里我把进程号去掉了，觉得进程号在此处没多大用处。文件所在目录为/tmp下，也可以自己修改为可执行文件所在目录，这样比较直观。
然后运行命令：sysctl -p /etc/sysctl.conf 或写到/etc/rc.d/rc.local文件里去,每次启动都运行一下
假设将其值改变为："/home/duanbei/corefile/core-%e-%p-%t"， 那么所有的core文件将保存在"/home/duanbei/corefile"目录下，文件名格式为“core-程序名-pid-时间戳”
格式参数列表
[plain] view plaincopyprint?
%p - insert pid into filename
%u - insert current uid into filename
%g - insert current gid into filename
%s - insert signal that caused the coredump into the filename
%t - insert UNIX time that the coredump occurred into filename
%h - insert hostname where the coredump happened into filename
%e - insert coredumping executable name into filename
%p - insert pid into filename
%u - insert current uid into filename
%g - insert current gid into filename
%s - insert signal that caused the coredump into the filename
%t - insert UNIX time that the coredump occurred into filename
%h - insert hostname where the coredump happened into filename
%e - insert coredumping executable name into filename
注：如果设置了“%p”，而“/proc/sys/kernel/core_uses_pid”值又为1，则不会添加PID后缀，因文件名中已含该信息
$1 = 0x0 我编写的一个测试用例
#include <stdio.h>
int main(void){
int man = 0;
scanf("%d",man);
return 0;
}
在pc 上面用 arm-hisi-linux-gcc 编译生成 可执行问题ttt
将ttt在arm板子上面运行的到core文件
将core文件传送回pc
在pc上面用命令sudo ./arm-hisi-linux-gdb -c /home/xiaosw/222/core /home/xiaosw/tttt
[xiaosw@localhost bin]$ sudo ./arm-hisi-linux-gdb -c /home/xiaosw/222/core /home/xiaosw/tttt
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-hisi-linux"...
Error while mapping shared library sections:
/lib/libc.so.0: No such file or directory.
warning: .dynamic section for "/lib/ld-uClibc.so.0" is not at the expected address (wrong library or version mismatch?)
Symbol file not found for /lib/libc.so.0
Reading symbols from /lib/ld-uClibc.so.0...done.
Loaded symbols for /lib/ld-uClibc.so.0
Core was generated by `./tttt'.
Program terminated with signal 11, Segmentation fault.
#0 0x4003abc4 in ?? ()
显示/lib/libc.so.0库没有， 在/lib下面却是没有这个文件， 但是在我的交叉编译目录下面有，所以我用7楼的办法添加了
set solib-search-path /opt/hisi-linux/x86-arm/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib（这个是我的pc机上面的交叉
编译环境的库的目录）
(gdb) set solib-search-path /opt/hisi-linux/x86-arm/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib
warning: .dynamic section for "/lib/ld-uClibc.so.0" is not at the expected address (wrong library or version mismatch?)
Reading symbols from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0...done.
Loaded symbols for /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
Reading symbols from /lib/ld-uClibc.so.0...done.
Loaded symbols for /lib/ld-uClibc.so.0
清空以前载入的文件
(gdb) core-file
No core file now.
载入core文件
(gdb) core-file /home/xiaosw/222/core
warning: .dynamic section for "/lib/ld-uClibc.so.0" is not at the expected address (wrong library or version mismatch?)
Loaded symbols for /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
Loaded symbols for /lib/ld-uClibc.so.0
Core was generated by `./tttt'.
Program terminated with signal 11, Segmentation fault.
#0 0x4003abc4 in _store_inttype () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
(gdb) where
#0 0x4003abc4 in _store_inttype () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#1 0x4003e028 in __psfs_do_numeric () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#2 0x4003d6cc in vfscanf () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#3 0x4003e1c0 in scanf () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#4 0x000084b0 in main () at gdbtest.c:4
(gdb) bt
#0 0x4003abc4 in _store_inttype () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#1 0x4003e028 in __psfs_do_numeric () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#2 0x4003d6cc in vfscanf () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#3 0x4003e1c0 in scanf () from /opt/hisi-linux/x86-arm-org/gcc-3.4.3-uClibc-0.9.28/usr/arm-hisi-linux/lib/libc.so.0
#4 0x000084b0 in main () at gdbtest.c:4
(gdb)
set solib-absolute-prefix path
If this variable is set, path will be used as a prefix for any absoluteshared library paths; many runtime loaders store the absolute paths tothe shared library in the target program's memory. If you use`solib-absolute-prefix' to find shared libraries, they need to be laidout in the same way that they are on the target, with e.g. a `/usr/lib'hierarchy under path. You can set the default value of`solib-absolute-prefix' by using the configure-time `--with-sysroot'option.
如果这一变量被设置，path将被作为任何绝对路径共享库的前缀；许多运行时的载入器存储目标程序内存中共享库的绝对路径。如果你使用“solib-absolute-prefix”查找共享库，它们应该和目标上有一样的路径结构，比如path下的一个“/usr/lib”的层次。
show solib-absolute-prefix
Display the current shared library prefix.
显示当前共享库前缀的配置。
set solib-search-path path
If this variable is set, path is a colon-separated list of directoriesto search for shared libraries. `solib-search-path' is used after`solib-absolute-prefix' fails to locate the library, or if the path tothe library is relative instead of absolute. If you want to use`solib-search-path' instead of `solib-absolute-prefix', be sure to set`solib-absolute-prefix' to a nonexistant directory to prevent GDB fromfinding your host's libraries.
如果这一变量被设置，其中path是冒号分割的用来搜索共享库的目录的列表。“solib-search-path”在“solib-absolute-prefix”定位库失败后使用，或者库的路径是相对的，而不是绝对的。如果你想使用“solib-search-path”代替“solib-absolute-prefix”，确定“solib-absolute-prefix”设置的是不存在的目录，以阻止 GDB 查找宿主机上的库。
show solib-search-path
Display the current shared library search path.
显示当前共享库查找路径的配置。
扫一扫
6811
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
