Arduino开发之Blink LED

最新推荐文章于 2024-08-07 18:43:43 发布

枫★曦

最新推荐文章于 2024-08-07 18:43:43 发布

阅读量1.1k

点赞数

分类专栏： IoT

本文链接：https://blog.csdn.net/md521/article/details/75805870

版权

24 篇文章 2 订阅

订阅专栏

 
 环境搭建： 

  1. Arduino UNO R3开发板， 

  2. Arduino IDE。 

  目前最新版是1.8.3。可以在 
 https://www.arduino.cc/en/Main/Software下载并安装。 

  安装好之后，桌面会有如下图标。 

 
 示例开发： 

  1.连接设备。 

  本例中我们以DFR0021-R LED为例，基于Arduino Uno R3和Arduino IDE开发。 

  DFR0021-R的引脚和Arduino Uno开发板的连接方式如下， 

  2. 编码。 

  连接好之后，用数据线连接Arduino开发板和电脑。同时打开Arduino IDE。输入下述代码。 

  const int ledPin = 6;// the number of the LED pin 

  // Variables will change : 

  int ledState = LOW; // ledState used to set the LED 

  // Generally, you should use "unsigned long" for variables that hold time 

  // The value will quickly become too large for an int to store 

  unsigned long previousMillis = 0; // will store last time LED was updated 

  // constants won't change : 

  const long interval = 1000; // interval at which to blink (milliseconds) 

  void setup() { 

  // set the digital pin as output: 

  pinMode(ledPin, OUTPUT); 

  Serial.begin(9600); // open serial port, set the baud rate to 9600 bps 

}

  void loop() { 

  // here is where you'd put code that needs to be running all the time. 

  // check to see if it's time to blink the LED; that is, if the 

  // difference between the current time and last time you blinked 

  // the LED is bigger than the interval at which you want to 

  // blink the LED. 

  unsigned long currentMillis = millis(); 

  if (currentMillis - previousMillis >= interval) { 

  // save the last time you blinked the LED 

  previousMillis = currentMillis; 

  // if the LED is off turn it on and vice-versa: 

  if (ledState == LOW) { 

  ledState = HIGH; 

  } else { 

  ledState = LOW; 

}

  // set the LED with the ledState of the variable: 

  Serial.println(ledState); 

  digitalWrite(ledPin, ledState); 

}

}

  然后保存文件。 

  选择Arduino Uno开发板。 

  编译上传大到开发板。 

  3.运行。 

  选择COM口信息， 

  然后选择端口监视工具，查看程序运行信息。 

  串口监视信息， 

  上面的数据就是Red LED 返回当前状态(1表示开，0表示关)。 

 
 整体运行界面： 

关注

专栏目录