meter:Response too large to be displayed. Size: 4

问题：
jmeter下载文件的时候响应数据无法显示：

Response too large to be displayed. Size: 26214400 > Max: 204800, Start of message

原因："If the response data is larger than 200K, then it won't be displayed.
To change this limit, set the jmeter.property
view.results.tree.max_size "   默认值为200*1024B

解决办法：

修改jmeter.property的view.results.tree.max_size参数值

结果：

view.results.tree.max_size设置太大会导致jmeter响应慢，标签间切换非常慢。可以不修改该参数，通过查看服务后台来查看请求结果是否正确。

[ prev in list ] [ next in list ] [ prev in thread ] [next in thread]

List:       jmeter-user
Subject:    Re: Query | Help needed in Regular Expression
From:       sebb <sebbaz () gmail ! com>
Date:       2008-09-18 15:42:09
Message-ID: 25aac9fc0809180842y850c7c0p81be19e54570b138 () mail ! gmail ! com
[ Download message RAW ]

On 18/09/2008, Mohamed Niyas <niyas.mohd@gmail.com> wrote:
> Hi Sebb,
>
>    Due to our stage build instability the samplers landed to error page.
>    I confirmed this by checking other scripts which was working well with the
>    RE attached with it.
>    When i ran those scripts, that RE samplers didnot get the exact values which
>    it retreives properly before.
>
>    So i wait for sometime for the latest build, & checked with the RE. It
>    worked well. The other point which i shown in the Jmeter log does not having
>    any issue even though it is shown as "Response data too Large".    All the

This is because of the potential problems when displaying large amounts of data.

See:

http://jakarta.apache.org/jmeter/usermanual/component_reference.html#View_Results_Tree

where it says:

"If the response data is larger than 200K, then it won't be displayed.
To change this limit, set the JMeter property
view.results.tree.max_size  "

You can also save the response to a file using:

http://jakarta.apache.org/jmeter/usermanual/component_reference.html#Save_Responses_to_a_file

>    latest scripts which includes RE extract the right data with this warning
>    too. This is all for your information.
>
>    I didnt check the debug sampler + Tree listener yet. Will check it tomorrow.
>
>
>    Thanks a lot for your quick response.
>
>
> Regards
>
> Mohamed Niyas M
>
>
>    On Thu, Sep 18, 2008 at 5:51 PM, sebb <sebbaz@gmail.com> wrote:
>
>    > On 18/09/2008, Mohamed Niyas <niyas.mohd@gmail.com> wrote:
>    > > Hi Sebb,
>    > >
>    > >    I have recreated the script again & it worked well with the same RE.
>    > Thanks
>    > >    a lot.
>    >
>    > So what was the problem?
>    > Was there a typo in the original script?
>    >
>    > >    As you said in previous mail to add the Debug sampler with the tree
>    > >    listener. I tried this.
>    > >    I have added a DEBUG post processor succeeded with the tree listener,
>    > But
>    > >    the regular expression values
>    > >    i am not seeing that.
>    > >
>    > >    Thread Group
>    > >     sampler - 1
>    > >     sampler - 2
>    > >         RE - 1
>    > >         debug sampler
>    > >         Tree Listener
>    >
>    > Thread Group
>    > + sampler - 1
>    > + sampler - 2
>    > + +     RE - 1
>    > + debug sampler
>    > + + Tree Listener    OR
>    > + Tree Listener
>    >
>    > >    By this set up, will i be able to see the extracted values in the
>    > listeners?
>    >
>    > Yes, check the response data pane - the debug sampler returns the
>    > information as response data.
>    >
>    > >    Or Did i miss something here to fulfill my request?
>    > >
>    > >    Regards
>    > >
>    > > Mohamed Niyas M
>    > >
>    > >
>    > >
>    > >
>    > >
>    > >
>    > >    On Thu, Sep 18, 2008 at 9:12 AM, Mohamed Niyas <niyas.mohd@gmail.com>
>    > wrote:
>    > >
>    > >    >    Hi sebb,
>    > >    >
>    > >    > I have tried the RE which you suggested. It is still returned -1 which
>    > is a
>    > >    > default value i set in RE.
>    > >    > But the Jmeter log says the sampler data which i am using this RE
>    > >    > says "Response too large to be displayed. Size: 412152 > Max: 204800 "
>    > >    >
>    > >    > Below the JMeter log contents.
>    > >    >
>    > >    > 2008/09/18 09:02:22 WARN -
>    > jmeter.visualizers.ViewResultsFullVisualize r:
>    > >    > Response too large to be displayed. Size: 412152 > Max: 204800
>    > >    > 2008/09/18 09:02:33 WARN -
>    > jmeter.visualizers.ViewResultsFullVisualize r:
>    > >    > Response too large to be displayed. Size: 412152 > Max: 204800
>    > >    > 2008/09/18 09:02:47 WARN -
>    > jmeter.visualizers.ViewResultsFullVisualize r:
>    > >    > Response too large to be displayed. Size: 412152 > Max: 204800
>    > >    >
>    > >    > *Note:* Thanks a lot for your quick response. I checked the RE in ORO
>    > >    > link, it is working fine. I am able to extract the right values which
>    > i want
>    > >    > to extract. but the same it not working in the test plan samplers.
>    > >    >
>    > >    > Please suggest me if i can increase the size of response page. Any
>    > >    > thoughts/suggestions are welcome.
>    > >    >
>    > >    > Regards
>    > >    > Mohamed Niyas M
>    > >    >     On Wed, Sep 17, 2008 at 4:57 PM, sebb <sebbaz@gmail.com> wrote:
>    > >    >
>    > >    >> On 17/09/2008, Mohamed Niyas <niyas.mohd@gmail.com> wrote:
>    > >    >> > hello team,
>    > >    >> >
>    > >    >> >    I just wanted your help to resolve the issues with the regular
>    > >    >> expression.
>    > >    >> >
>    > >    >> >    In my web request one of the web request response page contains
>    > the
>    > >    >> >    following data.
>    > >    >> >
>    > >    >> >    <li><a
>    > >    >> href="hotelDetails.form?octopusPropertyCode=T04185&cityId=3117735"
>    > >    >> >    title="HIGH TECH AVENIDA - Rank - 1 ">
>    > >    >> >    <li><a
>    > href="hotelDetails.form?octopusPropertyCode=TRA1&cityId=3117735"
>    > >    >> >    title="TRAVELODGE TORRELAGUNA - Rank - 2 ">
>    > >    >> >
>    > >    >> >    I wanted to extract
>    > >    >> >
>    > >    >> >    1) octopusPropertyCode="*T04185*"
>    > >    >> >    2) cityId="*3117735*"
>    > >    >> >
>    > >    >> >    I have given the following pattern for Property Code
>    > >    >> >
>    > >    >> >    *Regular Expression:*
>    > >    >> href="hotelDetails.form?octopusPropertyCode=(.*?)&
>    > >    >>
>    > >    >> That should be: href="hotelDetails.form\?octopusPropertyCode=(.*?)&
>    > >    >>
>    > >    >> because form? means "for" optionally followed by "m".
>    > >    >>
>    > >    >> >    *Template :* $1$
>    > >    >> >    *match No:* 1
>    > >    >> >    *Default value :* -1
>    > >    >> >
>    > >    >> >    For city ID
>    > >    >> >
>    > >    >> >    *Regular Expression:*
>    > >    >> href="hotelDetails.form?octopusPropertyCode=(.*?)"
>    > >    >> >    I thought it must have the extracted value as "*
>    > >    >> >    octopusPropertyCode=T04185&cityId=3117735*" if so, how can i split
>    > city
>    > >    >> id
>    > >    >> >    from this,
>    > >    >> >    provided if the regular expression is working correct.
>    > >    >> >
>    > >    >> >    But it returned the default value only (-1). Do i need to escape
>    > the
>    > >    >> "?"
>    > >    >> >    character? if so, how?
>    > >    >>
>    > >    >> See above.
>    > >    >>
>    > >    >> >    can anybody    please help me to extract the property code & city id
>    > from
>    > >    >> this
>    > >    >> >    expression?
>    > >    >>
>    > >    >> href="hotelDetails.form\?octopusPropertyCode=(.*?)&cityId=(\d+)
>    > >    >>
>    > >    >> property code will be in $1$ and cityId in $2$
>    > >    >>
>    > >    >> >    Sometimes back i have seen a mail to print the extracted code in
>    > the
>    > >    >> title
>    > >    >> >    bar?
>    > >    >>
>    > >    >> What title bar? Do you mean the Name of a sampler?
>    > >    >> If so, just use ${variable} in the name.
>    > >    >>
>    > >    >> >    can any one please tell me how to see the extracted values from
>    > the web
>    > >    >> >    request?
>    > >    >>
>    > >    >> Or use the Debug Sampler together with Tree View Listener.
>    > >    >>
>    > >    >> >
>    > >    >> >    Awaiting to hear from you team
>    > >    >> >
>    > >    >> >    Thanks in advance
>    > >    >> >
>    > >    >> > Mohamed Niyas M
>    > >    >> >
>    > >    >>
>    > >    >> ---------------------------------------------------------------------
>    > >    >> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>    > >    >> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>    > >    >>
>    > >    >>
>    > >    >
>    > >    >
>    > >    > --
>    > >    > Regards, Mohamed Niyas M Mobile: 98804 59080 niyas.mohd@gmail.com
>    > >    > to_niyas@yahoo.co.in
>    > >    >
>    > >
>    > >
>    > >
>    > >    --
>    > >    Regards, Mohamed Niyas M Mobile: 98804 59080 niyas.mohd@gmail.com
>    > >    to_niyas@yahoo.co.in
>    > >
>    >
>    > ---------------------------------------------------------------------
>    > To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>    > For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>    >
>    >
>
>
>    --
>    Regards, Mohamed Niyas M Mobile: 98804 59080 niyas.mohd@gmail.com
>    to_niyas@yahoo.co.in