SQL Server TRACE FLAG

flag	Trace Flag Description (underlined are sp_configure’able)
-1	Sets trace flags for all connections. Used only with DBCC TRACEON and TRACEOFF. The setting of the Trace flag -1 is not visible with DBCC TRACESTATUS command, but work without problems.
105	SQL Server 6.5 you can use maximum 16 tables or subqueries in a single select statement. There is no documented way, to avoid this restriction, but you can use undocumented trace flag 105 for this purpose.
106	Disables line number information for syntax errors.
107	Interprets numbers with a decimal point as float instead of decimal.
110	Turns off ANSI select characteristics.
204	A backward compatibility switch that enables non-ansi standard behavior. E.g. previously SQL server ignored trailing blanks in the like statement and allowed queries that contained aggregated functions to have items in the group by clause that were not in the select list.
205	Report when a statistics-dependent stored procedure is being recompiled as a result of AutoStat.
206	Provides backward compatibility for the setuser statement.
208	SET QUOTED IDENTIFIER ON.
237	Tells SQL Server to use correlated sub-queries in Non-ANSI standard backward compatibility mode.
242	Provides backward compatibility for correlated subqueries where non-ANSI-standard results are desired.
243	The behavior of SQL Server is now more consistent because null ability checks are made at run time and a null ability violation results in the command terminating and the batch or transaction process continuing.
244	Disables checking for allowed interim constraint violations. By default, SQL Server checks for and allows interim constraint violations. An interim constraint violation is caused by a change that removes the violation such that the constraint is met, all within a single statement and transaction. SQL Server checks for interim constraint violations for self-referencing DELETE statements, INSERT, and multi-row UPDATE statements. This checking requires more work tables. With this trace flag you can disallow interim constraint violations, thus requiring fewer work tables.
246	Derived or NULL columns must be explicitly named in a select….INTO or create view statement when not done they raise an error. This flag avoids that.
253	Prevents ad-hoc query plans to stay in cache.
257	Will invoke a print algorithm on the XML output before returning it to make the XML result more readable.
260	Prints versioning information about extended stored procedure dynamic-link libraries (DLLs). For more information about __GetXpVersion() , see Creating Extended Stored Procedures . Scope: global or session
262	SQL 7 - Trailing spaces are no longer truncated from literal strings in CASE statements. Used after hotfix 891116
302	Should be used with flag 310 to show the actual join ordering. Prints information about whether the statistics page is used, the actual selectivity (if available), and what SQL Server estimated the physical and logical I/O would be for the indexes.
310	Prints information about join order. Index selection information is also available in a more readable format using SET SHOWPLAN_ALL, as described in the SET statement.
320	Disables join-order heuristics used in ANSI joins. To see join-order heuristics use flag 310. SQL Server uses join-order heuristics to reduce the no’ of permutations when using the best join order.
323	Reports on the use of update statements using UPDATE in place. Shows a detailed description of the various update methods used by SQL Server 6.5.
325	Prints information about the cost of using a non-clustered index or a sort to process an ORDER BY clause.
326	Prints information about the estimated & actual costs of sorts. Instructs the server to use arithmetic averaging when calculating density instead of a geometric weighted average when updating statistics.  Useful for building better stats when an index has skew on the leading column.  Use only for updating the stats of a table/index with known skewed data.
330	Enables full output when using the SET SHOWPLAN_ALL option, which gives detailed information about joins.
342	Disables the costing of pseudo-merge joins, thus significantly reducing time spent on the parse for certain types of large, multi-table joins. One can also use SET FORCEPLAN ON to disable the costing of pseudo-merge joins because the query is forced to use the order specified in the FROM clause.
345	Increase the accuracy of choice of optimum order when you join 6 or more tables.
506	Enforces SQL-92 standards regarding null values for comparisons between variables and parameters. Any comparison of variables and parameters that contain a NULL always results in a NULL.
610	SQL 10 – Enable the potential for minimal-logging when: ·   Bulk loading into an empty clustered index, with no nonclustered indexes ·   Bulk loading into a non-empty heap, with no nonclustered indexes
611	After SQL 9 when turned on, each lock escalation is recorded in the SQL Server error log along with the SQL Server handle number.
652	Disables read ahead for the server.
653	Disables read ahead for the current connection.
661	Disables the ghost record removal process. A ghost record is the result of a delete operation. When you delete a record, the deleted record is kept as a ghost record. Later, the deleted record is purged by the ghost record removal process. When you disable this process, the deleted record is not purged. Therefore, the space that the deleted record consumes is not freed. This behavior affects space consumption and the performance of scan operations. SCOPE : Global. If you turn off this trace flag, the ghost record removal process works correctly.
806	Cause 'DBCC-style' page auditing to be performed whenever a database page is read into the buffer pool. This is useful to catch cases where pages are being corrupted in memory and then written out to disk with a new page checksum. When they're read back in the checksum will look correct, but the page is corrupt (because of the previous memory corruption). This page auditing goes someway to catching this - especially on non-Enterprise Edition systems that don't have the 'checksum sniffer'.
809	SQL 8 – Limits the amount of Lazy Write activity.
815	Enables latch enforcement. SQL Server 8 (with service pack 4) and SQL Server 9 can perform latch enforcement for data pages found in the buffer pool cache. Latch enforcement changes the virtual memory protection state while database page status changes from "clean" to "dirty" ("dirty" means modified through INSERT, UPDATE or DELETE operation). If an attempt is made to modify a data page while latch enforcement is set, it causes an exception and creates a mini-dump in SQL Server installation's LOG directory. Microsoft support can examine the contents of such mini-dump to determine the cause of the exception. In order to modify the data page the connection must first acquire a modification latch. Once the data modification latch is acquired the page protection is changed to read-write. Once the modification latch is released the page protection changes back to read-only.
818	SQL 8 enables in memory ring buffer used to track last 2048 successful write operations.
830	SQL 9 – disable the reporting of CPU Drift errors in the SQL Server errorlog like SQL Server has encountered 2 occurrence(s) of I/O requests taking longer than 15 seconds to complete
834	Causes SQL Server to use Windows large-page allocations for the memory that is allocated for the buffer pool. The page size varies depending on the hardware platform, but the page size may be from 2 MB to 16 MB. Large pages are allocated at startup and are kept throughout the lifetime of the process. Trace flag 834 improves performance by increasing the efficiency of the translation look-aside buffer (TLB) in the CPU. Flag 834 applies only to 64-bit versions of SQL Server. You must have the Lock pages in memory user right to turn on trace flag 834. You can turn on trace flag 834 only at startup. Trace flag 834 may prevent the server from starting if memory is fragmented and if large pages cannot be allocated. Therefore, trace flag 834 is best suited for servers that are dedicated to SQL Server. For more information about large-page support, http://msdn2.microsoft.com/en-us/library/aa366720.aspx (http://msdn2.microsoft.com/en-us/library/aa366720.aspx)
835	SQL 9 & 10. For 64 bit SQL Server. This turns off Lock pages in memory.
836	Causes SQL Server to size the buffer pool at startup based on the value of the max server memory option instead of based on the total physical memory. You can use trace flag 836 to reduce the number of buffer descriptors that are allocated at startup in 32-bit Address Windowing Extensions (AWE) mode. Trace flag 836 applies only to 32-bit versions of SQL Server that have the AWE allocation enabled. You can turn on trace flag 836 only at startup.
845	SQL 9 & 10. For 64 bit SQL Server. This turns on Lock pages in memory.
1117	Grows all data files at once, else it goes in turns.
1118	Switches allocations in tempDB from 1pg at a time (for first 8 pages) to one extent. There is now a cache of temp tables. When a new temp table is created on a cold system it uses the same mechanism as for SQL 8. When it is dropped though, instead of all the pages being deallocated completely, one IAM page & one data page are left allocated, then the temp table is put into a special cache. Subsequent temp table creations will look in the cache to see if they can just grab a pre-created temp table. If so, this avoids accessing the allocation bitmaps completely. The temp table cache isn't huge (32 tables), but this can still lead to a big drop in latch contention in tempdb. http://www.sqlskills.com/BLOGS/PAUL/post/Misconceptions-around-TF-1118.aspx
1180	Forces allocation to use free pages for text or image data and maintain efficiency of storage. 1197 applies only in the case of SQL 7 – SP3. Helpful in case when DBCC SHRINKFILE and SHRINKDATABASE commands may not work because of sparsely populated text, ntext, or image columns
1197
1200	Prints lock information (the process ID and type of lock requested).
1202	Insert blocked lock requests into syslocks.
1204	Returns resources and types of locks participating in a deadlock and command affected. Scope: global only
1205	More detailed information about the command being executed at the time of a deadlock. This trace flag was documented in SQL Server 7.0 Books Online, but was not documented in SQL Server 8.
1206	Used to complement flag 1204 by displaying other locks held by deadlock parties
1211	Disables lock escalation based on memory pressure, or based on number of locks. The SQL Server Database Engine will not escalate row or page locks to table locks. Using this trace flag can generate excessive numbers of locks. This can slow the performance of the Database Engine, or cause 1204 errors (unable to allocate lock resource) because of insufficient memory. For more information, see Lock Escalation (Database Engine) . If both trace flag 1211 and 1224 are set, 1211 takes precedence over 1224. However, because trace flag 1211 prevents escalation in every case, even under memory pressure, we recommend that you use 1224. This helps avoid "out-of-locks" errors when many locks are being used. Scope : global or session
1216	SQL 7 - Disables Health reporting. Lock monitor when detects a (worker thread) resource level blocking scenario. If a SPID that owns a lock is currently queued to the scheduler, because all the assigned worker threads have been created and all the assigned worker threads are in an un-resolvable wait state, the following error message is written to the SQL Server error log: Error 1223: Process ID %d:%d cannot acquire lock "%s" on resource %s because a potential deadlock exists on Scheduler %d for the resource. Process ID %d:% d holds a lock "%h" on this resource.
1222	Returns the resources and types of locks that are participating in a deadlock and also the current command affected, in an XML format that does not comply with any XSD schema. Scope : global only
1224	Disables lock escalation based on the number of locks. However, memory pressure can still activate lock escalation. The Database Engine escalates row or page locks to table (or partition) locks if the amount of memory used by lock objects exceeds one of the following conditions: ·   40% of the memory that is used by Db Engine, exclusive of memory allocation using Address Windowing Extension (AWE). This is applicable when the locks parameter of sp_configure is set to 0. ·   Forty percent of the lock memory that is configured by using the locks parameter of sp_configure . If both trace flag 1211 and 1224 are set, 1211 takes precedence over 1224. However, because trace flag 1211 prevents escalation in every case, even under memory pressure, we recommend that you use 1224. This helps avoid "out-of-locks" errors when many locks are being used. Note: Lock escalation to the table- or HoBT-level granularity can also be controlled by using the LOCK_ESCALATION option of the ALTER TABLE statement.  Scope: global or session
1261	SQL 8 - Disables Health reporting. Lock monitor when detects a (worker thread) resource level blocking scenario. If a SPID that owns a lock is currently queued to the scheduler, because all the assigned worker threads have been created and all the assigned worker threads are in an un-resolvable wait state, the following error message is written to the SQL Server error log: Error 1229: Process ID %d:%d owns resources that are blocking processes on scheduler %d.
1400	Enables the creation of the database mirroring endpoint, which is required for setting up and using database mirroring. This trace flag is allowed only when using the –T.
1462	Turns off log stream compression and effectively reverts the behavior back to ver 9.
1603	Use standard disk I/O (i.e. turn off asynchronous I/O).
1609	Turns on the unpacking and checking of remote procedure call (RPC) information in Open Data Services. Used only when applications depend on the old behavior.
1610	Boot the SQL dataserver with TCP_NODELAY enabled.
1611	If possible, pin shared memory -- check errorlog for success/failure.
1704	Prints information when a temporary table is created or dropped.
1717	Causes new objects being created to be system objects.
1806	Disables instant file initialization.
1807	Allows creating a database file on a mapped or UNC network location. unsupported under SQL Server 7 & 8.
2301	Enables advanced optimizations that are specific to decision support queries. This option applies to decision support processing of large data sets.
2330	Stops the collection of statistics for sys.db_index_usage_stats.
2382	Statistics collected for system tables.
2389	SQL 9 – Tracks the nature of columns by subsequent statistics updates. When SQL Server determines that the statistics increase three times, the column is branded ascending. The statistics will be updated automatically at query compile.
2390	Does the same like 2389 even if ascending nature of the column is not known and -- never enable without 2389.
2440	Parallel query execution strategy on partitioned tables. SQL 9 – uses a single thread per partition parallel query execution strategy. In ver. 10, multiple threads can be allocated to a single partition, thus improving the query’s response time.
2505	Prevents DBCC TRACEON 208, SPID 10 errors from appearing in the error log.
2508	Disables parallel non-clustered index checking for DBCC CHECKTABLE.
2509	Used with DBCC CHECKTABLE.html to see the total count of ghost records in a table
2520	Force DBCC HELP to return syntax of undocumented DBCC statements. If 2520 is not turned on, DBCC HELP will refuse to give you the syntax stating: "No help available for DBCC statement 'undocumented statement'".
2528	Disables parallel checking of objects by DBCC CHECKDB, CHECKFILEGROUP and CHECKTABLE. By default, the degree of parallelism is automatically determined by the query processor. The maximum degree of parallelism is configured just like that of parallel queries. For more information, see max degree of parallelism Option . Parallel DBCC should typically be left enabled. For DBCC CHECKDB, the query processor reevaluates and automatically adjusts parallelism with each table or batch of tables checked. Sometimes, checking may start when the server is almost idle. An administrator who knows that the load will increase before checking is complete may want to manually decrease or disable parallelism. Disabling parallel checking of DBCC can cause it to take much longer to complete and if DBCC is run with the TABLOCK feature enabled and parallelism set off, tables may be locked for longer periods of time. Scope : global or session
2537	SQL 9 & 10. Allows function ::fn_dblog to look inside all logs (not just the active log).
2542	SQL 8 – Used with Sqldumper.exe to get certain dumps. In range 254x – 255x.
2551	Adds additional information to the dump file.
2701	Sets the @@ERROR system function to 50000 for RAISERROR messages with severity levels of 10 or less. When disabled, sets the @@ERROR system function to 0 for RAISERROR messages with severity levels of 10 or less.
2861	Cache query plans for queries that have a cost of zero or near to zero.
3001	Stops sending backup entries into MSDB.
3004	Gives out more detailed information about restore & backup activities.
3031	SQL 9 - will turn the NO_LOG and TRUNCATE_ONLY options into checkpoints in all recovery modes.
3104	Causes SQL Server to bypass checking for free space.
3111	Cause LogMgr::ValidateBackedupBlock to be skipped during backup and restore operations.
3205	If a tape drive supports hardware compression, either the DUMP or BACKUP statement uses it. With this trace flag, you can disable hardware compression for tape drivers. This is useful when you want to exchange tapes with other sites or tape drives that do not support compression. Scope : global or session
3213	Trace SQL Server activity during backup process so that we will come to know which part of backup process is taking more time.
3222	Disables the read ahead that is used by the recovery operation during roll forward operations.
3226	With this trace flag, you can suppress BACKUP COMPLETED log entries going to WIN and SQL logs.
3231	SQL 8 & 9 - will turn the NO_LOG and TRUNCATE_ONLY options into no-ops in FULL/BULK_LOGGED recovery mode, and will clear the log in SIMPLE recovery mode.
3282	SQL 6.5 – Used after backup restoration fails refer to microsoft for article Q215458.
3422	Cause auditing of transaction log records as they're read (during transaction rollback or log recovery). This is useful because there is no equivalent to page checksums for transaction log records and so no way to detect whether log records are being corrupted e careful with these trace flags - I don't recommend using them unless you are experiencing corruptions that you can't diagnose. Turning them on will cause a big CPU hit because of the extra auditing that's happening.
3502	Tracks CHECKPOINT - Prints a message to the log at the start and end of each checkpoint.
3503	Indicates whether the checkpoint at the end of automatic recovery was skipped for a database (this applies only to read-only databases ).
3504	For internal testing. Will raise a bogus log-out-of-space condition from checkpoint()
3505	Disables automatic checkpoints. May increase recovery time and can prevent log space reuse until the next checkpoint is issued. Make sure to issue manual checkpoints on all read/write databases at appropriate time intervals. Note does not prevent the internal checkpoints that are issued by certain commands, such as BACKUP .
3601	Stack trace when error raised. Also see 3603
3602	Records all error and warning messages sent to the client.
3603	SQL Server fails to install on tricore, Bypass SMT check is enabled, flags are added via registry. Also see 3601.
3604	Sends trace output to the client. This trace flag is used only when setting trace flags with DBCC TRACEON and DBCC TRACEOFF.
3605	Sends trace output to the error log.  (if SQL Server is started from CMD output also appears on the screen)
3607	Trace flag 3607 skips the recovery of databases on the startup of SQL Server and clears the TempDB. Setting this flag lets you get past certain crashes, but there is a chance that some data will be lost
3608	Prevents SQL Server from automatically starting and recovering any database except the master database. Databases will be started and recovered when accessed. Some features, such as snapshot isolation and read committed snapshot, might not work.
3609	Skips the creation of the tempdb database at startup. Use this trace flag if the device or devices on which tempdb resides are problematic or problems exist in the model database.
3610	SQL 9. Divide by zero to result in NULL instead of error.
3625	Limits the amount of information returned in error messages. For more information, see Metadata Visibility Configuration . Scope : global only
3626	Turns on tracking of the CPU data for the sysprocesses table.
3640	Eliminates the sending of DONE_IN_PROC messages to the client for each statement in a stored procedure. This is similar to the session setting of SET NOCOUNT ON, but when set as a trace flag, every client session is handled this way.
3689	Logs extended errors to errorlog when network disconnect occurs, turned off by default. Will dump out the socket error code this can sometimes give you a clue as to the root cause.
3913	SQL 7/8 – SQL Server does not update the rowcnt column of the sysindexes system table until the transaction is committed. When turned on the optimizer gets row count information from in-memory metadata that is saved to sysindexes system table when the transaction commits.
4013	This trace flag writes an entry to the SQL Server error log when a new connection is established. For each connection that occurs, the trace flag writes two entries that look like this: Login: sa saSQL Query Analyzer(local)ODBCmaster, server process ID (SPID): 57, kernel process ID (KPID): 57. Login: sa XANADUsaSQL Query Analyzer(local)ODBCmaster, server process ID (SPID): 57, kernel process ID (KPID): 57.
4022	If turns on, then automatically started procedures will be bypassed.
4029	Logs extended errors to errorlog when network disconnect occurs, turned off by default. Will dump out the socket error code this can sometimes give you a clue as to the root cause.
4030	Prints both a byte and ASCII representation of the receive buffer. Used when you want to see what queries a client is sending to SQL Server. You can use this trace flag if you experience a protection violation and want to determine which statement caused it. Typically, you can set this flag globally or use SQL Server Enterprise Manager. You can also use DBCC INPUTBUFFER.
4031	Prints both a byte and ASCII representation of the send buffers (what SQL Server sends back to the client). You can also use DBCC OUTPUTBUFFER.
4032	Traces the SQL commands coming in from the client. The output destination of the trace flag is controlled with the 3605/3604 trace flags.
4101	SQL 9 - Query that involves an outer join operation runs very slowly. However, if you use the FORCE ORDER query hint in the query, the query runs much faster. Additionally, the execution plan of the query contains the following text in theWarnings column:  NO JOIN PREDICATE Turn these trace flags after HOTFIX is applied (SP2 CUP4)
4121
4606	Over comes SA password by startup. Refer to Ms article 936892.
4612	Disable the ring buffer logging - no new entries will be made into the ring buffer.
4613	Generate a minidump file whenever an entry is logged into the ring buffer.
4616	Makes server-level metadata visible to application roles. In SQL Server, an application role cannot access metadata outside its own database because application roles are not associated with a server-level principal. This is a change of behavior from earlier versions of SQL Server. Setting this global flag disables the new restrictions, and allows for application roles to access server-level metadata. Scope : global only
5302	Alters default behavior of select…INTO (and other processes) that lock system tables for the duration of the transaction. This trace flag disables such locking during an implicit transaction.
6527	Disables generation of a memory dump on the first occurrence of an out-of-memory exception in CLR integration. By default, SQL Server generates a small memory dump on the first occurrence of an out-of-memory exception in the CLR. The behavior of the trace flag is as follows: ·   If this is used as a startup trace flag, a memory dump is never generated. However, a memory dump may be generated if other trace flags are used. ·   If this trace flag is enabled on a running server, a memory dump will not be automatically generated from that point on. However, if a memory dump has already been generated due to an out-of-memory exception in the CLR, this trace flag will have no effect. Scope : global only
7103	Disable table lock promotion for text columns. Refer to Ms article - 230044
7300	Retrieves extended information about any error you encounter when you execute a distributed query.
7501	Dynamic cursors are used by default on forward-only cursors. Dynamic cursors are faster than in earlier versions and no longer require unique indexes. This flag disables the dynamic cursor enhancements and reverts to version 6.0 behavior.
7502	Disables the caching of cursor plans for extended stored procedures.
7505	Enables version 6.x handling of return codes when calling dbcursorfetchex and the resulting cursor position follows the end of the cursor result set.
7525	Reverts to the SQL Server 7 behavior of closing nonstatic cursors regardless of the SET CURSOR_CLOSE_ON_COMMIT state in SQL Server 8.
7601	Turns on full text indexing. Together these four gather more information about full text search (indexing process) to the error log.
7603
7604
7605
7646	SQL 10. Avoids blocking when using full text indexing. An issue we experienced that full text can be slow when there is a high number of updates to the index and is caused by blocking on the docidfilter internal table.
7806	Enables a dedicated administrator connection (DAC) on SQL Svr Express. By default, no DAC resources are reserved on SQL Server Express.
8004	SQL server to create a mini dump once you enable 2551 and a out of memory condition is hit.
8011	Disables the collection of additional diagnostic information for Resource Monitor. You can use the information in this ring buffer to diagnose out-of-memory conditions. Scope: GLOBAL.
8012	Records an event in the schedule ring buffer every time that one of the following events occurs: ·   A scheduler switches context to another worker. ·   A worker is suspended or resumed. ·   A worker enters the preemptive mode or the non-preemptive mode. You can use the diagnostic information in this ring buffer to analyze scheduling problems. For example, you can use the information in this ring buffer to troubleshoot problems when SQL Server stops responding. Trace flag 8012 disables recording of events for schedulers. You can turn on trace flag 8012 only at startup.
8018	Disables the creation of the ring buffer, and no exception information is recorded. The exception ring buffer records the last 256 exceptions that are raised on a node. Each record contains some information about the error and contains a stack trace. A record is added to the ring buffer when an exception is raised.
8019	Disables stack collection during the record creation, has no effect if trace flag 8018 is turned on. Disabling the exception ring buffer makes it more difficult to diagnose problems that are related to internal server errors. You can turn on trace flag 8018 and trace flag 8019 only at startup.
8020	SQL Server uses the size of the working set when SQL Server interprets the global memory state signals from the operating system. Trace flag 8020 removes the size of the working set from consideration when SQL Server interprets the global memory state signals. If you use this trace flag incorrectly, heavy paging occurs, and the performance is poor. Therefore, contact Microsoft Support before you use. You can turn on trace flag 8020 only at startup
8033	SQL 9 – disable the reporting of CPU Drift errors in the SQL Server errorlog like time stamp counter of CPU on scheduler id 1 is not synchronized with other CPUs.
8202	Used to replicate UPDATE as DELETE/INSERT pair at the publisher. i.e. UPDATE commands at the publisher can be run as an "on-page DELETE/INSERT" or a "full DELETE/INSERT". If the UPDATE command is run as an "on-page DELETE/INSERT," the Logreader send UDPATE command to the subscriber, If the UPDATE command is run as a "full DELETE/INSERT," the Logreader send UPDATE as DELETE/INSERT Pair. If you turn on trace flag 8202, then UPDATE commands at the publisher will be always send to the subscriber as DELETE/INSERT pair.
8206	Supports stored procedure execution with a user specified owner name for SQL Server subscribers or without owner qualification for heterogeneous subscribers in SQL Server 8.
8207	Enables singleton updates for Transactional Replication, released with SQL Server 8 SP 1.
8501	Writes detailed information about Ms-DTC context & state changes to the log.
8599	Allows you to use a savepoint within a distributed transaction.
8602	Ignore index hints that are specified in query/procedure.
8679	Prevents the SQL Server optimizer from using a Hash Match Team operator.
8687	Used to disable query parallelism.
8721	Dumps information into the error log when AutoStat has been run.
8722	Disable all other types of hints. This includes the OPTION clause.
8744	Disables pre-fetching for the Nested Loops operator. Incorrect use of this trace flag may cause additional physical reads when SQL Server executes plans that contain the Nested Loops operator. For more information about the Nested Loops operator, see the "Logical and physical operators reference" topic in SQL Server 9 BOL. You can turn on trace flag 8744 at startup or in a user session. When you turn on trace flag 8744 at startup, the trace flag has global scope. When you turn on trace flag 8744 in a user session, the trace flag has session scope.
8755	Disable any locking hints like READONLY. By setting this, you allow SQL Server to dynamically select the best locking hint for the query.
8783	Allows DELETE, INSERT, and UPDATE statements to honor the SET ROWCOUNT ON setting when enabled.
8816	Logs every two-digit year conversion to a four-digit year.
9134	SQL 8 – Does additional reads to test if the page is allocated & linked correctly this checks IAM & PFS. Fixes error 601 for queries under Isolation level read uncommitted.
9268	SQL 8 – When SQL Server runs a parameterized query that contains several IN clauses, each with a large number of values, SQL Server may return the following error message after a minute or more of high CPU utilization: Server: Msg 8623, Level 16, State 1 Internal Query Processor Error: The query processor could not produce a query plan. Contact your primary support provider for more information. http://support.microsoft.com/kb/325658 Enabling this trace flag activates the hotfix.