虚拟机VMware与主机共享文件介绍

最新推荐文章于 2024-02-19 17:14:47 发布
最新推荐文章于 2024-02-19 17:14:47 发布
阅读量3.7k 收藏 3
点赞数
分类专栏： Linux
作者： 潇湘隐者

本文版权归作者所有，欢迎转载，但未经作者同意必须保留此段声明，且在文章页面明显位置给出原文连接.

我们经常会在Windows平台安装虚拟机VMware，不管是出于实验测试还是工作需要，伴随而来的就是经常需要在Windows系统和虚拟机系统之间进行共享数据文件，例如，需要将Window主机上的Oracle安装镜像文件拷贝到VMware上的Linux系统下....诸如此类需求，两者之间共享数据文件的方法其实蛮多的，下面介绍几种比较常用的共享文件方法(有些详细介绍、有些略有介绍):

1: 通过FTP共享文件数据

使用这类方法共享文件数据，通常虚拟机系统是Linux操作系统，当然Windows系统也一样。前提条件是其中一个必须安装有FTP组件。例如如下所示：

本机Windows 7 64位专业版，虚拟机Oracle Linux 5.7，我如果想将主机的文件拷贝到Oracle Linux 5.7,我可以通过SecureCRT下的STFP进行数据文件的拷贝传输。当然你也可以利用FTP软件进行数据文件传输。在此不做细说。如果虚拟机是Windows系统，可以在主机或虚拟机安装FileZilla FTP Client之类的FTP软件来实现FTP共享文件数据。

clip_image001

2：通过共享文件夹功能

虚拟机VMware提供了在宿主机与虚拟机系统之间交换文件的共享文件夹（Shared Folder）功能。不管虚拟机操作系统是Linux还是Windows都可用。你可以通过设置（ Settings）>共享文件夹（Shared Folder）来设置。但是此功能选项必须要安装虚拟机工具（VMware Tools），否则如下所示，否则该功能选项不可用。

clip_image002

安装虚拟机工具步骤如下所示：

1：在对应虚拟机的设置选项（Settings)下，为虚拟机光驱指定虚拟机系统的镜像文件。 注意：在执行下面步骤前，必须确保虚拟机的电源开启、虚拟机系统正在运行。

clip_image003

2：在VM下选择"Install VMware Tools".

clip_image004

然后安装虚拟机组件工具，详细步骤如下所示：

[root@DB-Server ~]# cd /mnt
[root@DB-Server mnt]# mkdir cdrom
[root@DB-Server mnt]# mount /dev/cdrom  /mnt/cdrom
[root@DB-Server mnt]# cd /mnt/cdrom
[root@DB-Server cdrom]# cp  VMwareTools-8.8.2-590212.tar.gz /tmp
[root@DB-Server cdrom]#tar xz
[root@DB-Server tmp]# ls
gconfd-root     orbit-root           VMwareTools-8.8.2-590212.tar.gz
keyring-qO15Cg  ssh-EWUeHQ4064       vmware-tools-distrib
mapping-root    virtual-root.9mZzaq
[root@DB-Server tmp]# cd vmware-tools-distrib/
[root@DB-Server vmware-tools-distrib]# ls
bin  doc  etc  FILES  INSTALL  installer  lib  vmware-install.pl
 
 
[root@DB-Server vmware-tools-distrib]# ./vmware-install.pl 
A previous installation of VMware Tools has been detected.
 
The previous installation was made by the tar installer (version 4).
 
Keeping the tar4 installer database format.
 
You have a version of VMware Tools installed.  Continuing this install will 
first uninstall the currently installed version.  Do you wish to continue? 
(yes/no) [yes] 
 
Uninstalling the tar installation of VMware Tools.
 
Stopping services for VMware Tools
 
Stopping VMware Tools services in the virtual machine:
   Guest operating system daemon:[  OK  ]
   Virtual Printing daemon:[  OK  ]
   VMware User Agent (vmware-user):[  OK  ]
   Blocking file system:[  OK  ]
   Unmounting HGFS shares:[  OK  ]
   Guest filesystem driver:[  OK  ]
   VM communication interface socket family:[  OK  ]
   VM communication interface:[  OK  ]
 
This program previously created the file 
/usr/lib/vmware-tools/lib64/libconf/etc/pango/pango.modules, and was about to 
remove it.  Somebody else apparently did it already.
 
File /etc/vmware-tools/vmware-user.desktop is backed up to 
/etc/vmware-tools/vmware-user.desktop.old.2.
 
File /usr/lib/vmware-tools/lib64/libconf/etc/gtk-2.0/gtk.immodules is backed up
to /usr/lib/vmware-tools/lib64/libconf/etc/gtk-2.0/gtk.immodules.old.2.
 
File /usr/lib/vmware-tools/lib64/libconf/etc/gtk-2.0/gdk-pixbuf.loaders is 
backed up to 
/usr/lib/vmware-tools/lib64/libconf/etc/gtk-2.0/gdk-pixbuf.loaders.old.2.
 
This program previously created the file 
/usr/lib/vmware-tools/libconf/etc/gtk-2.0/gdk-pixbuf.loaders, and was about to 
remove it.  Somebody else apparently did it already.
 
This program previously created the file 
/usr/lib/vmware-tools/lib64/libconf/etc/pango/pangorc, and was about to remove 
it.  Somebody else apparently did it already.
 
This program previously created the file 
/usr/lib/vmware-tools/libconf/etc/gtk-2.0/gtk.immodules, and was about to 
remove it.  Somebody else apparently did it already.
 
This program previously created the file 
/usr/lib/vmware-tools/lib64/libconf/etc/pango/pangox.aliases, and was about to 
remove it.  Somebody else apparently did it already.
 
This program previously created the directory /etc/vmware-tools, and was about 
to remove it. Since there are files in that directory that this program did not
create, it will not be removed.
 
File /etc/X11/xorg.conf is backed up to /etc/X11/xorg.conf.old.2.
 
The removal of VMware Tools 8.8.2 build-590212 for Linux completed 
successfully.
 
Installing VMware Tools.
 
In which directory do you want to install the binary files? 
[/usr/bin] 
 
What is the directory that contains the init directories (rc0.d/ to rc6.d/)? 
[/etc/rc.d] 
 
What is the directory that contains the init scripts? 
[/etc/rc.d/init.d] 
 
In which directory do you want to install the daemon files? 
[/usr/sbin] 
 
In which directory do you want to install the library files? 
[/usr/lib/vmware-tools] 
 
In which directory do you want to install the documentation files? 
[/usr/share/doc/vmware-tools] 
 
The path "/usr/share/doc/vmware-tools" does not exist currently. This program 
is going to create it, including needed parent directories. Is this what you 
want? [yes] 
 
The installation of VMware Tools 8.8.2 build-590212 for Linux completed 
successfully. You can decide to remove this software from your system at any 
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
 
Before running VMware Tools for the first time, you need to configure it by 
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want 
this program to invoke the command for you now? [yes] 
 
Initializing...
 
 
Making sure services for VMware Tools are stopped.
 
Stopping VMware Tools services in the virtual machine:
   Guest operating system daemon:[  OK  ]
   Virtual Printing daemon:[  OK  ]
   VMware User Agent (vmware-user):[  OK  ]
   Blocking file system:[  OK  ]
   Unmounting HGFS shares:[  OK  ]
   Guest filesystem driver:[  OK  ]
   VM communication interface socket family:[  OK  ]
   VM communication interface:[  OK  ]
 
 
[EXPERIMENTAL] The VMware FileSystem Sync Driver (vmsync) is a new feature that
creates backups of virtual machines. Please refer to the VMware Knowledge Base 
for more details on this capability. Do you wish to enable this feature? 
[no] no
 
 
Before you can compile modules, you need to have the following installed... 
 
make
gcc
kernel headers of the running kernel
 
 
Searching for GCC...
Detected GCC binary at "/usr/bin/gcc".
The path "/usr/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no] no
 
Searching for a valid kernel header path...
Detected the kernel headers at 
"/lib/modules/2.6.32-200.13.1.el5uek/build/include".
The path "/lib/modules/2.6.32-200.13.1.el5uek/build/include" appears to be a 
valid path to the 2.6.32-200.13.1.el5uek kernel headers.
Would you like to change it? [no] 
 
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmci-only/linux/driver.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/linux/vmciKernelIf.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciContext.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDatagram.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDoorbell.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDriver.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciEvent.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciHashtable.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciQPair.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciQueuePair.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciResource.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciRoute.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/driverLog.o
  LD [M]  /tmp/vmware-root/modules/vmci-only/vmci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmci-only/vmci.mod.o
  LD [M]  /tmp/vmware-root/modules/vmci-only/vmci.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
 
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmci-only/linux/driver.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/linux/vmciKernelIf.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciContext.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDatagram.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDoorbell.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDriver.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciEvent.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciHashtable.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciQPair.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciQueuePair.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciResource.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciRoute.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/driverLog.o
  LD [M]  /tmp/vmware-root/modules/vmci-only/vmci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmci-only/vmci.mod.o
  LD [M]  /tmp/vmware-root/modules/vmci-only/vmci.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vsock-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vsock-only/linux/af_vsock.o
  CC [M]  /tmp/vmware-root/modules/vsock-only/linux/notify.o
  CC [M]  /tmp/vmware-root/modules/vsock-only/linux/notifyQState.o
  CC [M]  /tmp/vmware-root/modules/vsock-only/linux/stats.o
  CC [M]  /tmp/vmware-root/modules/vsock-only/linux/util.o
  CC [M]  /tmp/vmware-root/modules/vsock-only/linux/vsockAddr.o
  CC [M]  /tmp/vmware-root/modules/vsock-only/driverLog.o
  LD [M]  /tmp/vmware-root/modules/vsock-only/vsock.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vsock-only/vsock.mod.o
  LD [M]  /tmp/vmware-root/modules/vsock-only/vsock.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vsock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/vmware-root/modules/vsock-only'
 
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmxnet3-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmxnet3-only/vmxnet3_drv.o
  CC [M]  /tmp/vmware-root/modules/vmxnet3-only/vmxnet3_ethtool.o
  CC [M]  /tmp/vmware-root/modules/vmxnet3-only/vmxnet3_shm.o
  LD [M]  /tmp/vmware-root/modules/vmxnet3-only/vmxnet3.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmxnet3-only/vmxnet3.mod.o
  LD [M]  /tmp/vmware-root/modules/vmxnet3-only/vmxnet3.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmxnet3-only/vmxnet3.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmxnet3-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmxnet3-only'
cp -f vmxnet3.ko ./../vmxnet3.o
make: Leaving directory `/tmp/vmware-root/modules/vmxnet3-only'
 
The module pvscsi has already been installed on this system by another 
installer or package and will not be modified by this installer.  Use the flag 
--clobber-kernel-modules=pvscsi to override.
 
The module vmmemctl has already been installed on this system by another 
installer or package and will not be modified by this installer.  Use the flag 
--clobber-kernel-modules=vmmemctl to override.
 
The VMware Host-Guest Filesystem allows for shared folders between the host OS 
and the guest OS in a Fusion or Workstation virtual environment.  Do you wish 
to enable this feature? [yes] 
 
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmci-only/linux/driver.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/linux/vmciKernelIf.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciContext.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDatagram.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDoorbell.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciDriver.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciEvent.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciHashtable.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciQPair.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciQueuePair.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciResource.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/common/vmciRoute.o
  CC [M]  /tmp/vmware-root/modules/vmci-only/driverLog.o
  LD [M]  /tmp/vmware-root/modules/vmci-only/vmci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmci-only/vmci.mod.o
  LD [M]  /tmp/vmware-root/modules/vmci-only/vmci.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmhgfs-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/backdoor.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/backdoorGcc64.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/bdhandler.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/cpName.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/cpNameLinux.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/cpNameLite.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/dentry.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/dir.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/file.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/filesystem.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/fsutil.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/hgfsBd.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/hgfsEscape.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/hgfsUtil.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/inode.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/link.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/message.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/module.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/page.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/request.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/rpcout.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/stubs.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/super.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/tcp.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/transport.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/vmci.o
  CC [M]  /tmp/vmware-root/modules/vmhgfs-only/kernelStubsLinux.o
  LD [M]  /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.mod.o
  LD [M]  /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmhgfs-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only'
 
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmxnet-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmxnet-only/vmxnet.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmxnet-only/vmxnet.mod.o
  LD [M]  /tmp/vmware-root/modules/vmxnet-only/vmxnet.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/vmware-root/modules/vmxnet-only'
 
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make -C /lib/modules/2.6.32-200.13.1.el5uek/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/block.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/control.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/dbllnklst.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/dentry.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/file.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/filesystem.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/inode.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/module.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/stubs.o
  CC [M]  /tmp/vmware-root/modules/vmblock-only/linux/super.o
  LD [M]  /tmp/vmware-root/modules/vmblock-only/vmblock.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/vmware-root/modules/vmblock-only/vmblock.mod.o
  LD [M]  /tmp/vmware-root/modules/vmblock-only/vmblock.ko.unsigned
  NO SIGN [M] /tmp/vmware-root/modules/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.32-200.13.1.el5uek'
make -C $PWD SRCROOT=$PWD/. \
          MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
 
!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot they are not already present.  By selecting yes,
you will be enabling this experimental feature.  You can always disable this
feature by re-running vmware-config-tools.pl.
 
Would you like to enable VMware automatic kernel modules?
[no] no
 
 
 
Detected X version 7.1
 
 
 
Do you want to change the starting screen display size? (yes/no) [no] 
 
 
X is running fine with the new config file.
 
Creating a new initrd boot image for the kernel.
   Checking acpi hot plug[  OK  ]
Starting VMware Tools services in the virtual machine:
   Switching to guest configuration:[  OK  ]
   VM communication interface:[  OK  ]
   VM communication interface socket family:[  OK  ]
   Guest filesystem driver:[  OK  ]
   Mounting HGFS shares:[  OK  ]
   Blocking file system:[  OK  ]
   Guest operating system daemon:[  OK  ]
   Virtual Printing daemon:[  OK  ]
The configuration of VMware Tools 8.8.2 build-590212 for Linux for this running
kernel completed successfully.
 
You must restart your X session before any mouse or graphics changes take 
effect.
 
You can now run VMware Tools by invoking "/usr/bin/vmware-toolbox-cmd" from the
command line or by invoking "/usr/bin/vmware-toolbox" from the command line 
during an X server session.
 
To enable advanced X features (e.g., guest resolution fit, drag and drop, and 
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
 
Enjoy,
 
--the VMware team

官网关于手工安装升级虚拟机的文档如下所示：

Manually Install or Upgrade VMware Tools in a Linux Virtual Machine
 
For Linux virtual machines, you manually install or upgrade VMware Tools by using the command line.
 
Install the latest version of VMware Tools to enhance the performance of the virtual machine's guest operating system and improve virtual machine management. When you power on a virtual machine, if a new version of VMware Tools is available, you see a notification in the status bar of the guest operating system.
 
Prerequisites
 
■ Power on the virtual machine. 
 
■ Verify that the guest operating system is running. 
 
■ Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating system. 
 
Procedure
 
1 On the host, from the Workstation menu bar, select VM > Manage > Install VMware Tools. 
 
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
 
2 In the virtual machine, log in to the guest operating system as root and open a terminal window. 
 
3 Run the mount command with no arguments to determine whether your Linux distribution automatically mounted the VMware Tools virtual CD-ROM image. 
 
If the CD-ROM device is mounted, the CD-ROM device and its mount point are listed as something like this:
 
/dev/cdrom on /mnt/cdrom type iso9660 (ro,nosuid,nodev)4 If the VMware Tools virtual CD-ROM image is not mounted, mount the CD-ROM drive. 
 
a If a mount point directory does not already exist, create it. 
 
mkdir /mnt/cdromSome Linux distributions use different mount point names. For example, on some distributions the mount point is /media/VMware Tools rather than /mnt/cdrom. Modify the command to reflect the conventions that your distribution uses.
 
b Mount the CD-ROM drive. 
 
mount /dev/cdrom /mnt/cdromSome Linux distributions use different device names or organize the /dev directory differently. If your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom, modify the command to reflect the conventions that your distribution uses.
 
5 Change to a working directory (for example, /tmp). 
 
cd /tmp
 
6 Delete any previous vmware-tools-distrib directory before you install VMware Tools. 
 
The location of this directory depends on where you placed it during the previous installation. Often this directory is placed in /tmp/vmware-tools-distrib.
 
7 List the contents of the mount point directory and note the filename of the VMware Tools tar installer. 
 
ls mount-point8 Uncompress the installer. 
 
tar zxpf /mnt/cdrom/VMwareTools-x.x.x-yyyy.tar.gzThe value x.x.x is the product version number, and yyyy is the build number of the product release.
 
If you attempt to install a tar installation over an RPM installation, or the reverse, the installer detects the previous installation and must convert the installer database format before continuing.
 
9 If necessary, unmount the CD-ROM image. 
 
umount /dev/cdrom If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the image.
 
10 Run the installer and configure VMware Tools. 
 
cd vmware-tools-distrib./vmware-install.plUsually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
 
11 Respond to the prompts by pressing Enter to accept the default values, if appropriate for your configuration. 
 
12 Follow the instructions at the end of the script. 
 
Depending on the features you use, these instructions can include restarting the X session, restarting networking, logging in again, and starting the VMware User process. You can alternatively reboot the guest operating system to accomplish all these tasks.
 
What to do next
 
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.

然后在Options > Shared Folders下选择“Always enabled"选项。当然你也可以选择"Enabled until next power off or suspend"选项

clip_image005

clip_image006

clip_image007

clip_image008

clip_image009

此时在/mnt/hgfs下就会有一个tmp目录，在主机往E:\VMWARE下拷贝文件就能在Linux系统/mnt/hgfs/tmp目录下访问这些文件了。

（参考：http://my.oschina.net/shixiaobao17145/blog/126609）

使用vmtool 提供的命令——vmware-hgfsclient 查看系统中可以看到的由宿主机共享出的目录，但是/mnt/hgfs/下看不到目录。解决办法：

sudo apt-get install open-vm-tools

sudo mount -t vmhgfs .host:/ /mnt/hgfs（通过这步解决了我的问题）

--------------------------------------------------------------------------------------------------------

对于虚拟机系统是Windows平台的，可以如下设置。然后接下来也是一些大家所熟知的基本配置.(通过网上邻居就可以访问了)

clip_image010

3：组建局域网共享文件夹

此方法适用于虚拟机系统为Windows系统。网上有比较多的资料,都是一些基本配置,弄起来也有一些麻烦.感觉没啥可以说的.在此略过.

4：利用虚拟光驱共享文件

这种方法有点奇葩，第一次见到这种共享文件的方法，我当时的反应就是居然可以这样共享文件。其实就是利用软件将文件打包成镜像文件，然后在虚拟机设置（Settings）——“CD/DVD（IDE）”里面指定ISO镜像文件位置。 这种方法适用于虚拟机系统是Linux、Windows系统。不足之处就是只能从主机拷贝文件到虚拟机，不能从虚拟机拷贝文件到主机，而且折腾起来相当麻烦。

clip_image011

5：利用网盘实现共享文件

这个是我在论坛里面看到的一种方法，没有尝试过。这种方法只适用于小文件的共享，大文件共享适用这类方法不太合适。毕竟网络传输是瓶颈.


菜小白啊
关注
  • 0
    点赞
  • 踩
  • 3
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
VMware虚拟机局域网共享文件
01-08
很多人不会用物理机往虚拟机里传文件，这里我工具和教程都已经发布，教程可以查看我的个人资料-文章-解决主机与虚拟机不能复制文件的教程，里面详细的介绍了如何传文件！
VMware虚拟机与主机间共享文件的方法[汇编].pdf
10-20
VMware虚拟机与主机间共享文件的方法[汇编].pdf
虚拟机VM与主机之间共享文件夹
最新发布
qq_45092220的博客
02-19 1881
就两步：1.安装vm-tools工具2.设置共享的文件夹。
VMware 虚拟机与主机文件共享
01-01
实现VMware 虚拟机与主机文件共享功能，有图文解说
vmware 虚拟机vmware-tools安装
云上的日子
01-21 1013
root@ubuntu:/mnt# mount -t iso9660 /dev/cdrom /mnt  cd /mnt cp -rf * /tmp  umount /dev/cdrom tar -zxvf VMwareTools-9.9.0-2304977.tar.gz cd  vmware-tools-distrib ./vmware-install.pl
linux 安装VMware Tools 方法 （1）
weixin_33729196的博客
07-10 458
虚拟机安装 VMware Tools for Linux介绍: VMware Tools是VMware虚拟机中自带的一种增强工具，相当于VirtualBox中的增强功能（Sun VirtualBox Guest Additions），是VMware提供的增强虚拟显卡和硬盘性能、以及同步虚拟机与主机时钟的驱动程序。 只有在VMware虚拟机中安装好了VMware To...
VMware Ubuntu下找不到共享文件的解决方法
swjtugsz的博客
09-05 2936
我碰到了与http://ask.csdn.net/questions/163546#answer_133071相同的问题。 问题描述：     VMware无法通过mount挂载共享文件夹     为了要把主机（win7）的文件夹共享到虚拟机（ubuntu14）     VMtools已经装好，并开启了总是共享文件夹，设置好了共享目录     但是在/mnt/hgfs目录下是空的，按照网
Vmware与主机间共享文件的七种方法（附图+详解）
dear_fox的专栏
12-11 2万+
测试环境是：物理机：win Xp SP2 打全所有系统补丁虚拟机版本：VMware workstation 6.0.0 Build 45731虚拟机操作系统：纯净版win xp sp2====================================================================方法一：直接在物理机和虚拟机间拖拽文件这个不用多说，不过要注意的是，有些情况下拖
解决VM安装VMTools后错误提示,实现文件共享
kris的专栏
10-23 1万+
在VM里给Red Hat 9.0安装VMTools后重启，在系统启动过程中出现三处提示，分别为：第一处：Mounting local filesystem: Error: Cannot mount filesystem: Protocol error      [FAILED]第二处：Starting vmware-tools: Starting VMware Tools services in the virtual machine:                      Switching to g
解决VM安装VMTools后错误提示
梦想的天空
05-16 3623
在VM里给CentOS安装VMTools后重启，在系统启动过程中出现三处提示，分别为：第一处：Mounting local filesystem: Error: Cannot mount filesystem: Protocol error      [FAILED]第二处：Starting vmware-tools: Starting VMware Tools services in the
VMWare虚拟机如何与主机共享文件夹
07-13
VMWare虚拟机如何与主机共享文件夹VMWare虚拟机如何与主机共享文件夹(最容易看懂的讲解)附图
VMware虚拟机与主机文件共享[归纳].pdf
10-20
VMware虚拟机与主机文件共享[归纳].pdf
解决向虚拟机中拖拽文件，文件不全的问题【Vmware】|【CentOS】[“gzip: stdin: unexpected end of file“]
weixin_41807807的博客
09-09 6107
解决向Vmware中拖放文件，文件残缺无法使用的问题，含vmware-tools安装方法 报错： “gzip: stdin: unexpected end of file tar: Unexpected EOF in archive tar: Unexpected EOF in archive tar: Error is not recoverable: exiting now”
VM ubuntu没有hgfs文件夹无法创建共享
haigand的专栏
05-11 679
更新了VMWare tools 同时也设置了共享文件夹，都没用。 原来说好的./vmware-install.pl，一路enter下去呢？ 在中间竟然来了这么一个情况。必须敲yes才行，而不是默认的no！ The VMware Host-Guest Filesystem allows for shared folders between the host OS and the guest ...
vmware 中安装linux 后如何安装vmtool
gxj022的专栏
04-29 2891
  在 vmware软件中 点击setting->vmware tools installmount /dev/cdrom /mnt/cdromcd /mnt/cdrom里面就有显卡驱动 登录root点击setting->vmware tools installcd /tmptar zxvf vmware-linux-tools.tar.gzcd vmware-linux-tools./i
VMware Linux环境下安装VMware Tools
热门推荐
panjiansheng123的博客
04-09 5万+
一、前言有时候需要在Linux环境下进行开发，会通过安装虚拟机的方式使用Linux。如果不安装VMtool，虚拟机分辨率不方便设置，并且不能和宿主机之间进行复制粘贴，安装VMtool后虚拟机分辨率会自动随窗口大小变化，也可以直接右键进行复制粘贴。比如窗口是这样的： 二、软件环境Vmware Workstation 12，Ubuntu 16.04三、流程1、 在菜单的虚拟机菜单项下选择重新安装VM
VMware安装Ubuntu 16客户机操作系统
buckmole的博客
11-13 4585
VMware® Workstation 16 Pro安装Ubuntu客户机操作系统 注：此安装过程在ThinkPad笔记本电脑（配置：Intel Core i7 64位CPU处理器，16G内存，Win1064位企业版）上测试通过。 步骤简述： 准备工作 → 创建新的虚拟机 → 在虚拟机上安装Linux操作系统Ubuntu → 在Ubuntu上安装VMware Tools 1. 准备工作 1.1 下载虚拟机 VMware® Workstation 16 Pro，并安装。 1.2 ...
Windows 2003虚拟机和宿主机之间的文件共享方法
Darren洋的博客
04-18 606
Windows 2003虚拟机和宿主机之间的文件共享方法
vmware与虚拟机共享文件
09-14
您好！对于 VMware 虚拟机与主机之间的文件共享，您可以使用以下几种方法： 1. 共享文件夹：在 VMware 虚拟机设置中，可以指定一个文件夹与主机共享。在虚拟机中，您可以通过网络访问这个共享文件夹，并在虚拟机和主机之间进行文件传输。 2. 通过网络共享：在虚拟机和主机之间设置共享文件夹后，您可以使用网络协议（如 SMB 或 NFS）来在虚拟机和主机之间进行文件传输，就像在局域网中的两台计算机之间进行文件共享一样。 3. 通过剪贴板共享：在 VMware 虚拟机中，您可以启用剪贴板共享功能，允许将文本和文件从主机复制到虚拟机中，或从虚拟机复制到主机中。 需要注意的是，具体的步骤可能会根据您使用的 VMware 版本和操作系统有所不同。建议您参考 VMware 官方文档或使用搜索引擎查询相关的具体步骤和设置方式。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值