OERR: ORA-8103 "object no longer exists" Master Note / Troubleshooting, Diagnostic and Solution (Doc

In this Document

 Purpose
 Scope
 Details
 Description
 Cause
 Expected behavior.
 Block Corruption.
 Overlapped Extents.
 Overlapped ASM extent.
 Oracle defect.
 Identify the affected object
 Get the SQL statement that is causing the error.
 Identify the affected object in trace file section "dump suspect buffer".
 Identify the affected object with ANALYZE.
 Identify the object with event 10236.
 Identify the object with event 10200.
 Identify object affected by Block Corruption.
 Identify object affected by Overlapped Extents.
 
 Using the call stack trace arguments to identify the block producing the ORA-8103.
 Solution
 Fix Block Corruption.
 Flush the buffer cache.
 Flush the shared pool.
 Index Corruption.
 Table Corruption.
 OPTION 1 - No backup
 OPTION 2 - No backup
 Temporary Segment Corruption
 Fix Overlapped Extents.
 References

APPLIES TO:

Oracle Database - Enterprise Edition - Version 8.1.5.0 to 11.2.0.3 [Release 8.1.5 to 11.2]
Information in this document applies to any platform.

PURPOSE

This article provides information about error ORA-8103 and possible actions.

SCOPE

This note is intended for general audience as initial starting point for beginning diagnosis of ORA-8103.

DETAILS

 

Error: ORA 8103 
Text: object no longer exists 
-------------------------------------------------------------------------------
Cause: The object has been deleted by another user since the operation began.
Action: Remove references to the object.

 

Description

ORA-8103 is reporting that a SQL statement found a block that no longer belongs to the object referenced in the statement. 

Cause

ORA-8103 is caused by an invalid block type. The block header has an invalid block type or the block type inside the block is not expected; e.g. a data block (Type=6) was expected but the actual block information is not a data block (Type!=6).

ORA-8103 is also caused by an unexpected data_object_id where it is changing for the involved objects while the affected SQL statement is executed.

These two causes might be due to an expected behavior or other problems.  Details are:

Expected behavior.
Tables are being dropped/truncated while a SQL statement for those tables is still in execution. In the case of an index, it might be caused by an index rebuild. In other words the object has been deleted by another session since the operation began.
Look if dba_objects.data_object_id is changing for the affected object while queries are being executed.
data_object_id is changed by DDL statements like:

truncate table
alter index .. rebuild
alter table .. move
etc.

For a truncate look for column TRUNCATED in DBA_TAB_MODIFICATIONS. Note that it indicates whether the table has been truncated since the last analyze.  See documentation.

In 11g parameter enable_ddl_logging can be set to TRUE to print DDL statements in the alert log and identify what DDL's are run that may potentially cause this error.
Block Corruption.
Hardware, IO subsystem or OS problems may cause block corruptions overwriting the Block Type in the block header causing the error ORA-8103. 

The block is healthy but it is an "OLD/STALE" block. These kind of corruptions might be caused by LOST IO/LOST WRITE or a bug in external non-oracle tools that migrate file systems while the database is OPEN.   In that case the data_object_id for the affected object could have changed but the actual block does not reflect it.

Note that the block may also be temporarily corrupted in the buffer cache (SGA Memory).
Overlapped Extents.
Overlapped Extents means that two or more segments incorrectly use the same block. This is a LMT Bitmap Extent inconsistency or Data Dictionary inconsistency.

To identify overlapped extents run the next checks:

For LMT (Locally Managed Tablespaces) run :


sqlplus / as sysdba

execute dbms_space_admin.tablespace_verify('&tablespace_name')
oradebug setmypid
oradebug tracefile_name

In 10gR2 and forward, for locally managed tablespaces using ASSM (DBA_TABLESPACES.SEGMENT_SPACE_MANAGEMENT=AUTO) run:

execute dbms_space_admin.assm_tablespace_verify('&tablespace_name',dbms_space_admin.TS_VERIFY_BITMAPS)
oradebug setmypid
oradebug tracefile_name

  • Note that the session running dbms_space_admin does not say in the screen if an inconsistency is detected.  dbms_space_admin will generate a trace file instead.   So check if "oradebug tracefile_name" provides a trace file.
  • If ORA-8103 is produced by tablespace_verify, it means that a block associated to the segment header is affected.  Identify the affected object as explained in the section below and drop it.  It may convert the segment to temporary which may need the usage of dbms_space_admin.segment_corrupt and dbms_space_admin.segment_drop to completely remove the segment. 


For Data Dictionary managed tablespaces run the hcheck script in: 

Note 136697.1 (it checks for overlapped extents through fet$/uet$).
Overlapped ASM extent.
If using ASM: overlapped ASM extents is when 2 different files and 2 different extents use the same Allocation Unit (AU) in the same ASM disk. 

From the ASM instance run:

SQL> alter diskgroup <name> check all norepair;

In ASM alert log the next message is registered:

ERROR: file +data1.3551.721223631: F3551 PX3819 => D254 A78 => F3564 PX337: fnum mismatch

Meaning that ASM file number 3551 Physical Extent 3819 is using Allocation unit 78 in Disk 254 and at the same time ASM File Number 3564 has Physical Extent pointing to the same Allocation unit.
Oracle defect.

It can be an Oracle bug.  See section "known issues" below.

 

Identify the affected object

Sometimes the SQL statement producing the ORA-8103 involves several tables and the affected object can be an index.  Follow the next procedures to identify the affected object:

Get the SQL statement that is causing the error.
Reproduce the error from SQL*Plus if possible by running the affected SQL statement.
Identify the affected object in trace file section "dump suspect buffer".
In some cases when a trace file is generated, either by default with no error printed or by enabling the 8103 errorstack event mentioned later, there is a section "dump suspect buffer" that can be used to extract the object_id of the affected segment and query dba_objects to identify it. Example from a trace file:
   
<Oracle Function>:  dump suspect buffer ...
buffer tsn: .....
....
BH (0x0000000449F392B8) file#: 51 rdba: 0x0ccb247d (51/730237) class: 1 ba: 0x0000000448ADE000
  set: 46 pool: 3 bsz: 8192 bsi: 0 sflg: 1 pwc: 0,25
  dbwrid: 1 obj: 116770 objn: 76458 tsn: 14 afn: 51 ..
To identify the affected segment execute:  select * from dba_objects where object_id = 76458;
 
Identify the affected object with ANALYZE.
Is it a TABLE or an INDEX causing the error?:
For a TABLE run:
analyze table <table_name> validate structure;

Alternatively  identify if a full table scan is producing the error.
For an INDEX run:
analyze index <index_name> validate structure;
Identify the object with event 10236.
In 9.2.0.8 or above if ktrget is in the call stack trace for an ORA-8103, setting Event 10236 will include the block number causing the error:

alter session set events '8103 trace name errorstack level 3';
alter session set events '10236 trace name context forever, level 1';
alter session set tracefile_identifier='ORA8103';

run the query that produces the error ORA-8103 and identify the trace with the form of <sid>_ora_<pid>_ORA8103.trc

Open the trace file and if function ktrget is in the call stack trace, then the trace file may have:

KTRVAC: path typ=22, rdba=32810e06

Meaning that the error is produced in rdba=0x32810e06 . Convert that number to decimal and get the relative_fno, block#:

select dbms_utility.data_block_address_file(847318534) relative_fno
,dbms_utility.data_block_address_block(847318534) block#
from dual;

RELATIVE_FNO BLOCK#
------------ ----------
         202 69126

Then use  Note 819533.1 to identify the object; section "Identify the Corrupt Object".
Identify the object with event 10200.
Event 10200 can be used to identify the last accessed block when this error is produced. event trace_buffer_on can be used to generate a smaller trace file.  Errorstack and event 10236 can be added to get a more complete trace file:

alter session set max_dump_file_size=unlimited;
alter session set db_file_multiblock_read_count=1;
alter session set events 'immediate trace name trace_buffer_on level 1048576';
alter session set events '10200 trace name context forever, level 1';
alter session set events '8103 trace name errorstack level 3';
alter session set events '10236 trace name context forever, level 1';
alter session set tracefile_identifier='ORA8103';

run the query that produces the error ORA-8103

alter session set events 'immediate trace name trace_buffer_off';
exit

Identify the trace with the form of <sid>_ora_<pid>_ORA8103.trc

In the trace file generated locate last information about:

"Consistent read started for block <XXX>: <YYY>"

where XXX is the tablespace number and YYY is the rdba for that block.  Normally this is the affected block.

Trace output example:

*** 2004-01-28 09:40:16.000
*** SESSION ID:(9.5) 2004-01-28 09:40:16.000
Consistent read started for block 0 : 00405302
env: (scn: 0x0000.001a9434 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 0sch: scn: 0x0000.00000000)
CR exa ret 9 on: 01FEE950 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
Consistent read finished for block 0 : 405302
Consistent read finished for block 0 : 405302
Consistent read started for block 0 : 00405303

The error is produced while reading rdba=0x00405303 (File=1,Block=21251) as there is NOT a message like:
"Consistent read finished for block 0 : 00405303"

Then use Note <> to identify the object; section "Identify the Corrupt Object".
Identify object affected by Block Corruption.
Use DBVerify or RMAN to identify corrupted blocks associated to the datafiles where the object is stored. 

A common corruption is when the block has been zeroed out (block type is also zero). DBVerify reports it as:


Completely zero block found during dbv


Use sections "DBVerify - Identify Datafile Block Corruptions" or "RMAN - Identify Datafile Block Corruptions" in  Note 836658.1 and  Note 819533.1 to identify the affected object.
Identify object affected by Overlapped Extents.
If overlapped extents in Locally Managed Tablespace is identified, use  Note 887263.1 to identify the segments involved.

 

Solution

Fix Block Corruption.
If error ORA-8103 is constantly reproduced by ANALYZE and if it has been determined that it is not the expected behavior, then it means that there is a possible block corruption. The possible solutions are:
Flush the buffer cache.
It might be a corruption only in the SGA memory (Buffer cache):

alter session set events 'immediate trace name flush_cache level 1';

In a RAC system, flushing the buffer cache may be needed in the additional rac instances.

If error persists, continue with the next steps:
Flush the shared pool.

In some cases the problem can be caused by an cursor invalidation problem for which flushing the shared_pool can be a workaround:

alter system flush shared_pool;

 If error still persists, then it could be a permanent problem present on disk.  Continue with next steps:

Index Corruption.
Drop and recreate the index.
Table Corruption.
1. Consider to apply media recovery if it is determined that the problem was caused by a corrupt block (Like zeroed out blocks). RMAN BLOCKRECOVER can be used to repair a zeroed out block. 

2. TRUNCATE or DROP it and reload the data from export dump. If the the same error is produced by dropping/truncating a PARTITION, then consider to EXCHANGE:


alter table <owner>.<table_name> exchange partition <partition_name> with table <owner>.<new_table>;


Note: <new_table> has to have the same structure as <table_name>.

3. If recover from a backup is not an option, table data can be saved skipping the blocks that are causing the ORA-8103 error:
OPTION 1 - No backup

If the table has an index use the plsql script provided in Note  1527738.1

OPTION 2 - No backup
If the table does not have an index, use script provided in  Note 422547.1

Another solution is to determine if dbms_repair can be used to skip these blocks or if procedure described in  Note 61685.1 can be used to skip corrupted blocks using rowid scans.
Temporary Segment Corruption
If it is identified that the ORA-8103 is caused by a temporary segment, use dbms_space_admin to drop the temporary segment and rebuild the tablespace bitmap:


sqlplus / as sysdba

execute dbms_space_admin.segment_corrupt('&tablespace_name',&relative_fno,&block_number)
execute dbms_space_admin.segment_drop_corrupt('&tablespace_name',&relative_fno,&block_number)
execute dbms_space_admin.tablespace_rebuild_bitmaps('&tablespace_name')

Fix Overlapped Extents.
If the error is caused by Overlapped extents in a LOCALLY MANAGED Tablespace (LMT):
  • Drop one of the affected objects. If the segment is converted to temporary then use dbms_space_admin.segment_corrupt and dbms_space_admin.segment_drop to remove the segment.
  • Make sure that there are not more overlap extents by running dbms_space_admin.assm_tablespace_verify or dbms_space_admin.tablespace_verify
  • Fix the overlap inconsistency by running dbms_space_admin.tablespace_rebuild_bitmaps.   Note that it will not fix the current affected blocks producing ORA-8103.

For a DICTIONARY MANAGED tablespace determine if the database has to be recreated.


Known Bugs

You can restrict the list below to issues likely to affect one of the following versions by clicking the relevant button: 
                             


NBBugFixedDescription
 1824070412.1.0.2, 12.2.0.0ORA-8103 during upgrade on ALTER TABLE kottd$ MOVE LOB
 1748060012.1.0.2, 12.2.0.0ORA-8103 / ORA-600 [ktsfbfmt:objdchk_kcbnew_3] after ALTER INDEX on AQ$_QT_I/T
 1968997912.2.0.0ORA-8103 or ORA-600 [ktecgsc:kcbz_objdchk] on PARTITION table after TRUNCATE in 11.2.0.4 or above
 1961458512.1.0.2.DBBP03, 12.2.0.0ORA-600 [kksgaGetNoAlloc_Int0] from query on physical standby database
*E1831072212.2.0.0Prevent same file usage in same ASM DISKGROUP with OMF and LOG/DB_FILE_NAME_CONVERT which may cause LOST WRITE / stale block errors in a Physical Standby configuration - superseded
 1828476311.2.0.4.BP13, 12.1.0.2, 12.2.0.0ORA-600 [3020] on ASSM blocks in Standby Database after CONVERT TO PHYSICAL or ORA-8103 ORA-600 [4552] in non-standby after FLASHBACK
 1599635712.2.0.0ORA-8103 when revoking DBA privileges
 1378573411.2.0.4, 12.1.0.0ORA-8103 or similar from queries on PARTITION table in ADG Standby Database - superseded
 1684444811.2.0.3.9, 11.2.0.3.BP22, 11.2.0.4, 12.1.0.2ORA-600 [3020] after flashback database in a RAC
 1596942911.2.0.4, 12.1.0.1Wrong Results / ORA-600 [qesmagettblseg1] / ORA-8103 at physical standby with fix for bug 13536971
 1391042011.2.0.3.6, 11.2.0.3.BP09, 11.2.0.4, 12.1.0.1ORA-8103 during insert / update of basicfile LOB in assm segment using space search cache
 1372539511.2.0.3.8, 11.2.0.3.BP07, 11.2.0.4, 12.1.0.1ORA-600 [kdzhFindHeadPiece: unnewed > 1] from load into HCC table
 1370057711.2.0.3.BP07, 11.2.0.4, 12.1.0.1PQ slave dies with ORA-600 [kdblddr_2]
 1274743711.2.0.3.8, 11.2.0.3.BP21, 11.2.0.4, 12.1.0.1ORA-600 [ktspfmdb:objdchk_kcbnew_3] after purging single consumer queue table
 1258283911.2.0.3, 12.1.0.1ORA-8103/ORA-600 [3020] on RMAN recovered locally managed tablespace
P1233091112.1.0.1EXADATA LSI firmware for lost writes
 1232130911.2.0.4, 12.1.0.1ORA-600 / ORA-8103 UNUSABLE state of partitioned index is not carried across by TABLESPACE transport using DataPump
 1193725311.2.0.2.6, 11.2.0.2.BP11, 11.2.0.3, 12.1.0.1A Parallel query fails with ORA-8103 on an Active Dataguard Enviroment.
 1185049211.2.0.3, 12.1.0.1ORA-8103 ORA-600 ORA-3113 on temporary tables using INDEX FAST FULL SCAN and DIRECT read
 1038581211.2.0.2.BP20, 11.2.0.3, 12.1.0.1ORA-1410 or ORA-8103 by queries with DIRECT READ while concurrent DIRECT INSERT
 1032914611.2.0.1.BP10, 11.2.0.2.2, 11.2.0.2.BP03, 11.2.0.2.GIBUNDLE02, 11.2.0.2.GIPSU02, 11.2.0.3, 12.1.0.1Lost write in ASM with multiple DBWs and a disk is offlined and then onlined
+1020923211.1.0.7.7, 11.2.0.1.BP08, 11.2.0.2.1, 11.2.0.2.BP02, 11.2.0.2.GIBUNDLE01, 11.2.0.3, 12.1.0.1ORA-1578 / ORA-600 [3020] Corruption. Misplaced Blocks and Lost Write in ASM
 1013641511.2.0.3, 12.1.0.1ORA-8103 on Partitioned IOT after partition maintenance
 1002697211.2.0.2.BP02, 11.2.0.3, 12.1.0.1Intermittent Wrong results from Parallel Query with chained rows in RAC
 996508511.2.0.3, 12.1.0.1ORA-1578 / ORA-8103 Temporary table block corruption / space wastage from PDML - superseded
 965961410.2.0.5.3, 11.2.0.3.5, 11.2.0.3.BP05, 11.2.0.4, 12.1.0.1Large trace file for ORA-8103
 965135011.2.0.2.2, 11.2.0.2.BP05, 11.2.0.3, 12.1.0.1Large redo dump and ORA-308 might be raised due to ORA-8103
 927502711.2.0.2, 12.1.0.1ORA-600 [kcbnew_3] can occur after TRUNCATE / DROP
 927208611.1.0.7.4, 11.2.0.1.2, 11.2.0.1.BP06, 11.2.0.2, 12.1.0.1ORA-8103 by a query on DBA_EXTENTS. Trace file with Block type: 0x44=NGLOB: Extent Map
 875467011.2.0.2, 12.1.0.1IMP-17 / ORA-8103 transporting a large dictionary managed tablespace
 874099311.1.0.7.8, 11.2.0.2, 12.1.0.1ORA-1410 / ORA-8103 on ADG STANDBY during table scan after DROP/TRUNCATE/SHRINK in PRIMARY
 872528211.2.0.1.BP08, 11.2.0.2, 12.1.0.1Corruption from cross platform transport of tablespace with securefile objects
 871606411.2.0.2, 12.1.0.1Analyze Table Validate Structure fails on ADG standby with several errors
+859710611.2.0.1.BP06, 11.2.0.2, 12.1.0.1Lost Write in ASM when normal redundancy is used
 842852311.2.0.2, 12.1.0.1Alter Table Rename causes wrong results/ora-8103/hangs on ADG Standby.
 771082711.2.0.2, 12.1.0.1Index rebuild or Merge partition causes wrong results in concurrent reads instead of ORA-8103
 751940610.2.0.5.1, 11.2.0.1.2, 11.2.0.1.BP06, 11.2.0.2, 12.1.0.1Larger trace than needed for ORA-8103 under kteinicnt1
 887609411.1.0.7.2, 11.2.0.2ORA-8103 by DBA_UNDO_EXTENTS or DBMS_SPACE_ADMIN.TABLESPACE_VERIFY on Block type: 0x25
 916783111.2.0.2ORA-8103 instead of ORA-1410
 765099311.1.0.7.1, 11.2.0.1ORA-8103 in a select at ADG standby database from table stored in ASSM tablespace
 743255611.1.0.7.1, 11.2.0.1ORA-8103 by Parallel Query on Partitioned Tables in BIGFILE Tablespaces
 739032411.2.0.1ANALYZE signals OERI [kcbgtcr_12]/ORA-8103 on bitmap index
 711720011.2.0.1ORA-8103 after TSPITR/PLUGIN tablespace from a restored Level 1 Backup
E882504811.1.0.7.3ORA-308/ORA-27037 when dumping archived log for ORA-8103. Dump when event 10736 level 4 is set
 633737611.1.0.7OERI:kcbgcur_3 / ORA-8103 after truncating a partition table with LOBs
 971147211.1.0.6ORA-8103 on operations for a partitioned LOB if any different partition is dropped
 563797610.2.0.4, 11.1.0.6ORA-8103/ORA-1410 from concurrent INSERT / export on ASSM tables
 508339310.2.0.4, 11.1.0.6DBA_FREE_SPACE FILE_ID / REL_FNO may be wrong
 459259610.2.0.4, 11.1.0.6Corruption (ORA-1410 / ORA-8103) from multi-table insert with direct load
 686458610.2.0.5ORA-8103 on partitioned table with a LOB column during analyze table with concurrent add/drop partition.
 35695039.2.0.6, 10.2.0.4PQ may signal a false ORA-8103 under load
 13618170 ORA-8103 for create index online when the fix of bug 10027403 is installed
 39667099.2.0.7, 10.1.0.4, 10.2.0.1Range/object reuse prematurely (ORA-8103)
 38687539.2.0.7, 10.1.0.5, 10.2.0.1Concurrent export / INSERT of ASSM segment can fail with ORA-1410 / ORA-8103
+5523799 Various OERI (eg kcbgtcr_12) using ASSM managed segments - superceded
P*6047085 Linux x64-64: SGA corruption / crash following any ORA-7445
*37852009.2.0.6, 10.1.0.2Corruption possible in automatic space managed segments
 30835609.2.0.5, 10.1.0.2ORA-1410 / ORA-8103 from direct path export if concurrent DML occurs
 26198679.2.0.3, 10.1.0.2OERI:[KCBGTCR_12] / ORA-8103 / ORA-1410 SELECTing from bitmap managed segment
 255100010.1.0.2, 9.2.0.4False ORA-1410 / ORA-8103 possible from ANALYZE COMPUTE/ESTIMATE STATISTICS
 23337319.2.0.2ORA-8103 possible in PQ slave
 21054199.0.1.3, 9.2.0.1ORA-8103 possible from PQ on bitmap managed segments with concurrent inserts
 19984558.1.7.3, 9.0.1.3, 9.2.0.1OERI:KCBGTCR_4 possible from long running DDL if referenced object dropped/truncated
 18042999.0.1.1, 9.2.0.1Rollback of Direct load can corrupt BITMAP managed segments / ORA-8103
 16987899.2.0.1Wrong results, ORA-1410, ORA-8103, OERI:25012 on SELECT of UNSCOPED REF with ROWID
 15049679.2.0.1ORA-8103 possible on READ ONLY standby after TRUNCATE on primary
 14007398.1.7.1, 9.0.1.0Block corruption/OERI:2023 /ORA-8103 can occur if TRUNCATE is interrupted (Ctrl-C)
 12835218.1.7.0ORA-8103 can occur on TRUNCATED cluster table
 5898557.3.3.6, 7.3.4.1ORA:1578 or ORA:8103 selecting invalid ROWID
P10538638.0.5.2, 8.0.6.2NCR: ORA-8103 / corrupt read possible using async IO
  • '*' indicates that an alert exists for that issue.
  • '+' indicates a particularly notable issue / bug.
  • See Note:1944526.1 for details of other symbols used

REFERENCES

NOTE:1400739.8  - Bug 1400739 - Block corruption/OERI:2023 /ORA-8103 can occur if TRUNCATE is interrupted (Ctrl-C)
NOTE:7432556.8  - Bug 7432556 - ORA-8103 by Parallel Query on Partitioned Tables in BIGFILE Tablespaces
NOTE:2619867.8  - Bug 2619867 - OERI:[KCBGTCR_12] / ORA-8103 / ORA-1410 SELECTing from bitmap managed segment
NOTE:7710827.8  - Bug 7710827 - Index rebuild or Merge partition causes wrong results in concurrent reads instead of ORA-8103
NOTE:819533.1  - How to identify the corrupt Object reported by ORA-1578 / RMAN / DBVERIFY
NOTE:1998455.8  - Bug 1998455 - OERI:KCBGTCR_4 possible from long running DDL if referenced object dropped/truncated
NOTE:4592596.8  - Bug 4592596 - Corruption (ORA-1410 / ORA-8103) from multi-table insert with direct load
NOTE:3966709.8  - Bug 3966709 - Range/object reuse prematurely (ORA-8103)
NOTE:8428523.8  - Bug 8428523 - Alter Table Rename causes wrong results/ora-8103/hangs on ADG Standby.
NOTE:9965085.8  - Bug 9965085 - ORA-1578 / ORA-8103 Temporary table block corruption / space wastage from PDML - superseded
NOTE:887263.1  - How to identify the SEGMENT reported by dbms_space_admin.TABLESPACE_VERIFY
NOTE:1504967.8  - Bug 1504967 - ORA-8103 possible on READ ONLY standby after TRUNCATE on primary
NOTE:136697.1  - "hcheck.sql" script to check for known problems in Oracle8i, Oracle9i, Oracle10g and Oracle 11g
NOTE:9272086.8  - Bug 9272086 - ORA-8103 by a query on DBA_EXTENTS. Trace file with Block type: 0x44=NGLOB: Extent Map
NOTE:1698789.8  - Bug 1698789 - Wrong results, ORA-1410, ORA-8103, OERI:25012 on SELECT of UNSCOPED REF with ROWID
NOTE:2105419.8  - Bug 2105419 - ORA-8103 possible from PQ on bitmap managed segments with concurrent inserts
NOTE:1804299.8  - Bug 1804299 - Rollback of Direct load can corrupt BITMAP managed segments / ORA-8103
NOTE:3868753.8  - Bug 3868753 - Concurrent export / INSERT of ASSM segment can fail with ORA-1410 / ORA-8103
NOTE:12582839.8  - Bug 12582839 - ORA-8103/ORA-600 [3020] on RMAN recovered locally managed tablespace
NOTE:5523799.8  - Bug 5523799 - Various OERI (eg kcbgtcr_12) using ASSM managed segments - superceded
NOTE:6047085.8  - Bug 6047085 - Linux x64-64: SGA corruption / crash following any ORA-7445
NOTE:1283521.8  - Bug 1283521 - ORA-8103 can occur on TRUNCATED cluster table
NOTE:836658.1  - Identify the corruption extension using RMAN/DBV/ANALYZE etc
NOTE:5637976.8  - Bug 5637976 - ORA-8103/ORA-1410 from concurrent INSERT / export on ASSM tables
NOTE:61685.1  - Extracting Data from a Corrupt Table using ROWID Range Scans in Oracle8 and higher

NOTE:8597106.8  - Bug 8597106 - Lost Write in ASM when normal redundancy is used
NOTE:9275027.8  - Bug 9275027 - ORA-600 [kcbnew_3] can occur after TRUNCATE / DROP
NOTE:8725282.8  - Bug 8725282 - Corruption from cross platform transport of tablespace with securefile objects
NOTE:12747437.8  - Bug 12747437 - ORA-600 [ktspfmdb:objdchk_kcbnew_3] after purging single consumer queue table
NOTE:6864586.8  - Bug 6864586 - ORA-8103 on partitioned table with a LOB column during analyze table with concurrent add/drop partition.
NOTE:589855.8  - Bug 589855 - ORA:1578 or ORA:8103 selecting invalid ROWID
NOTE:8740993.8  - Bug 8740993 - ORA-1410 / ORA-8103 on ADG STANDBY during table scan after DROP/TRUNCATE/SHRINK in PRIMARY
NOTE:10136415.8  - Bug 10136415 - ORA-8103 on Partitioned IOT after partition maintenance
NOTE:10209232.8  - Bug 10209232 - ORA-1578 / ORA-600 [3020] Corruption. Misplaced Blocks and Lost Write in ASM
NOTE:9711472.8  - Bug 9711472 - ORA-8103 on operations for a partitioned LOB if any different partition is dropped
NOTE:9167831.8  - Bug 9167831 - ORA-8103 instead of ORA-1410
NOTE:7519406.8  - Bug 7519406 - Larger trace than needed for ORA-8103 under kteinicnt1
NOTE:2551000.8  - Bug 2551000 - False ORA-1410 / ORA-8103 possible from ANALYZE COMPUTE/ESTIMATE STATISTICS
NOTE:7650993.8  - Bug 7650993 - ORA-8103 in a select at ADG standby database from table stored in ASSM tablespace
NOTE:2333731.8  - Bug 2333731 - ORA-8103 possible in PQ slave
NOTE:1527738.1  - SCRIPT to skip ORA-8103 ORA-1410 ORA-1578 ORA-600 [kdsgrp1] when reading a TABLE
NOTE:11850492.8  - Bug 11850492 - ORA-8103 ORA-600 ORA-3113 on temporary tables using INDEX FAST FULL SCAN and DIRECT read
NOTE:11937253.8  - Bug 11937253 - A Parallel query fails with ORA-8103 on an Active Dataguard Enviroment.
NOTE:3785200.8  - Bug 3785200 - Corruption possible in automatic space managed segments
NOTE:8876094.8  - Bug 8876094 - ORA-8103 by DBA_UNDO_EXTENTS or DBMS_SPACE_ADMIN.TABLESPACE_VERIFY on Block type: 0x25
NOTE:1053863.8  - Bug 1053863 - NCR: ORA-8103 / corrupt read possible using async IO
NOTE:8825048.8  - Bug 8825048 - ORA-308/ORA-27037 when dumping archived log for ORA-8103. Dump when event 10736 level 4 is set
NOTE:5083393.8  - Bug 5083393 - DBA_FREE_SPACE FILE_ID / REL_FNO may be wrong
NOTE:7117200.8  - Bug 7117200 - ORA-8103 after TSPITR/PLUGIN tablespace from a restored Level 1 Backup
NOTE:9651350.8  - Bug 9651350 - Large redo dump and ORA-308 might be raised due to ORA-8103
NOTE:7390324.8  - Bug 7390324 - ANALYZE signals OERI [kcbgtcr_12]/ORA-8103 on bitmap index
NOTE:3083560.8  - Bug 3083560 - ORA-1410 / ORA-8103 from direct path export if concurrent DML occurs
NOTE:3569503.8  - Bug 3569503 - PQ may signal a false ORA-8103 under load
NOTE:8754670.8  - Bug 8754670 - IMP-17 / ORA-8103 transporting a large dictionary managed tablespace
NOTE:422547.1  - Extract rows from a CORRUPT table creating ROWID from DBA_EXTENTS
NOTE:9659614.8  - Bug 9659614 - Large trace file for ORA-8103
NOTE:10329146.8  - Bug 10329146 - Lost write in ASM with multiple DBWs and a disk is offlined and then onlined
NOTE:10385812.8  - Bug 10385812 - ORA-1410 or ORA-8103 by queries with DIRECT READ while concurrent DIRECT INSERT
NOTE:8716064.8  - Bug 8716064 - Analyze Table Validate Structure fails on ADG standby with several errors
  • 0
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值