29内核输入子系统多点上报机制实现

电容屏被广泛使用，多点触摸机制也随之发展，可惜29内核不支持多点上报，30以后内核才支持。

特此记录移植过程。

 

1、修改include/linux/input.h

 Index: include/linux/input.h =================================================================== --- include/linux/input.h (revision 1550) +++ include/linux/input.h (working copy) @@ -106,6 +106,7 @@ #define SYN_REPORT 0 #define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 /* * Keys and buttons @@ -644,6 +645,18 @@ #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 + +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ + #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) @@ -742,6 +755,12 @@ #define BUS_ATARI 0x1B /* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 + +/* * Values describing the status of a force-feedback effect */ #define FF_STATUS_STOPPED 0x00 @@ -1310,6 +1329,11 @@ input_event(dev, EV_SYN, SYN_REPORT, 0); } +static inline void input_mt_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_MT_REPORT, 0); +} + void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);

 

2、修改drivers/input/input.c

Index: drivers/input/input.c =================================================================== --- drivers/input/input.c (revision 1550) +++ drivers/input/input.c (working copy) @@ -29,6 +29,25 @@ #define INPUT_DEVICES 256 +/* + * EV_ABS events which should not be cached are listed here. + */ +static unsigned int input_abs_bypass_init_data[] __initdata = { + ABS_MT_TOUCH_MAJOR, + ABS_MT_TOUCH_MINOR, + ABS_MT_WIDTH_MAJOR, + ABS_MT_WIDTH_MINOR, + ABS_MT_ORIENTATION, + ABS_MT_POSITION_X, + ABS_MT_POSITION_Y, + ABS_MT_TOOL_TYPE, + ABS_MT_BLOB_ID, + ABS_MT_TRACKING_ID, + 0 +}; +static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; + + static LIST_HEAD(input_dev_list); static LIST_HEAD(input_handler_list); @@ -149,13 +168,17 @@ case SYN_CONFIG: disposition = INPUT_PASS_TO_ALL; break; - + case SYN_REPORT: if (!dev->sync) { dev->sync = 1; disposition = INPUT_PASS_TO_HANDLERS; } break; + case SYN_MT_REPORT: + dev->sync = 0; + disposition = INPUT_PASS_TO_HANDLERS; + break; } break; @@ -185,6 +208,11 @@ case EV_ABS: if (is_event_supported(code, dev->absbit, ABS_MAX)) { + if (test_bit(code, input_abs_bypass)) { + disposition = INPUT_PASS_TO_HANDLERS; + break; + } + value = input_defuzz_abs_event(value, dev->abs[code], dev->absfuzz[code]); @@ -1630,10 +1658,20 @@ .open = input_open_file, }; +static void __init input_init_abs_bypass(void) +{ + const unsigned int *p; + + for (p = input_abs_bypass_init_data; *p; p++) + input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p); +} + static int __init input_init(void) { int err; + input_init_abs_bypass(); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class/n");

 

3、输入子系统的初始化

input_dev->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS); input_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | BIT_MASK(ABS_MT_TOUCH_MAJOR) | BIT_MASK(ABS_MT_WIDTH_MAJOR) | BIT_MASK(ABS_MT_POSITION_X) | BIT_MASK(ABS_MT_POSITION_Y) | BIT_MASK(ABS_MT_TRACKING_ID);

 

4、子系统上报

input_report_key(ts->input, ABS_MT_TRACKING_ID, touch_num); input_report_abs(ts->input, ABS_MT_POSITION_X, mxt224_datablock.T_point[touch_num].x); input_report_abs(ts->input, ABS_MT_POSITION_Y, mxt224_datablock.T_point[touch_num].y); input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, mxt224_datablock.T_point[touch_num].amplitude); input_report_abs(ts->input, ABS_MT_WIDTH_MAJOR, mxt224_datablock.T_point[touch_num].area); input_report_abs(ts->input, ABS_PRESSURE,mxt224_datablock.T_gesture[touch_num].value); /*input_report_key(ts->input, BTN_TOUCH, 1);*/ input_mt_sync(ts->input);

 

注： 转载请注明出处