基于安卓的rndis驱动的usb网络共享的实现

开发环境：

硬件;三星s5pv210 

软件;linux3.0.8内核(用于android)

文件系统;嵌入式qt文件系统

内核配置

                --- USB Gadget Support                                                                        | |  
  | |                        [ ]   Debugging messages (DEVELOPMENT)                                                        | |  
  | |                        [ ]   Debugging information files (DEVELOPMENT)                                               | |  
  | |                        (2)   Maximum VBUS Power usage (2-500 mA)                                                     | |  
  | |                              USB Peripheral Controller (S3C HS USB OTG Device)  --->                                 | |  
  | |                              *** NOTE: S3C OTG device role enables the controller driver below ***                   | |  
  | |                        <*>   S3C high speed(2.0, dual-speed) USB OTG device                                          | |  
  | |                                S3C OTGD transfer mode (enabled DMA MODE)  --->                                       | |  
  | |                        <*>   USB Gadget Drivers (Android Gadget)  --->                                               | |  
  | |                                Android Gadget                                                                        | |  
  | |                        [*]       Use double word aligned                                                             | |  
  | |                                                                                   

注意：210平台的这个内核必须勾选Use double word aligned，否则网络通不了.

启动脚本配置

#/bin/sh
echo LGE > /sys/class/android_usb/adroid0/f_rndis/manufacturer
echo 18d1 > /sys/class/android_usb/android0/f_rndis/vendorID
echo 1 > /sys/class/android_usb/android0/f_rndis/wceis


echo 0 > /sys/class/android_usb/android0/enable
echo 18d1 > /sys/class/android_usb/android0/idVendor
echo 4ee4 > /sys/class/android_usb/android0/idProduct
echo 239 > /sys/class/android_usb/android0/bDeviceClass
echo 2 > /sys/class/android_usb/android0/bDeviceSubClass
echo 1 > /sys/class/android_usb/android0/bDeviceProtocol


echo rndis,mass_storage > /sys/class/android_usb/android0/functions
echo /dev/mmcblk1p1 > /sys/class/android_usb/android0/f_mass_storage/lun/file
echo 1 > /sys/class/android_usb/android0/enable
sleep 1
ifconfig rndis0 down
ifconfig rndis0 192.168.8.1 up

执行完毕上述脚本，即实现了rndis,和U盘的2个功能，如果需要实现开启usb的其他功能，参见下面的说明

# Copyright 2013 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
on init
    write /sys/class/android_usb/android0/f_rndis/manufacturer LGE
    write /sys/class/android_usb/android0/f_rndis/vendorID 18D1
    write /sys/class/android_usb/android0/f_rndis/wceis 1
on boot
    write /sys/class/android_usb/android0/iSerial ${ro.serialno}
    write /sys/class/android_usb/android0/iManufacturer ${ro.product.manufacturer}
    write /sys/class/android_usb/android0/iProduct ${ro.product.model}
# MTP
on property:sys.usb.config=mtp
    stop adbd
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18D1
    write /sys/class/android_usb/android0/idProduct 4EE1
    write /sys/class/android_usb/android0/bDeviceClass 0
    write /sys/class/android_usb/android0/bDeviceSubClass 0
    write /sys/class/android_usb/android0/bDeviceProtocol 0
    write /sys/class/android_usb/android0/functions mtp
    write /sys/class/android_usb/android0/enable 1
    setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=mtp,adb
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18D1
    write /sys/class/android_usb/android0/idProduct 4EE2
    write /sys/class/android_usb/android0/bDeviceClass 0
    write /sys/class/android_usb/android0/bDeviceSubClass 0
    write /sys/class/android_usb/android0/bDeviceProtocol 0
    write /sys/class/android_usb/android0/functions mtp,adb
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}
# rndis
on property:sys.usb.config=rndis
    stop adbd
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18D1
    write /sys/class/android_usb/android0/idProduct 4EE3
    write /sys/class/android_usb/android0/bDeviceClass 239
    write /sys/class/android_usb/android0/bDeviceSubClass 2
    write /sys/class/android_usb/android0/bDeviceProtocol 1
    write /sys/class/android_usb/android0/functions rndis
    write /sys/class/android_usb/android0/enable 1
    setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=rndis,adb
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18D1
    write /sys/class/android_usb/android0/idProduct 4EE4
    write /sys/class/android_usb/android0/bDeviceClass 239
    write /sys/class/android_usb/android0/bDeviceSubClass 2
    write /sys/class/android_usb/android0/bDeviceProtocol 1
    write /sys/class/android_usb/android0/functions rndis,adb
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}
# PTP
on property:sys.usb.config=ptp
    stop adbd
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18D1
    write /sys/class/android_usb/android0/idProduct 4EE5
    write /sys/class/android_usb/android0/bDeviceClass 0
    write /sys/class/android_usb/android0/bDeviceSubClass 0
    write /sys/class/android_usb/android0/bDeviceProtocol 0
    write /sys/class/android_usb/android0/functions ptp
    write /sys/class/android_usb/android0/enable 1
    setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=ptp,adb
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18D1
    write /sys/class/android_usb/android0/idProduct 4EE6
    write /sys/class/android_usb/android0/bDeviceClass 0
    write /sys/class/android_usb/android0/bDeviceSubClass 0
    write /sys/class/android_usb/android0/bDeviceProtocol 0
    write /sys/class/android_usb/android0/functions ptp,adb
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}
# diag
on property:sys.usb.config=diag
    stop adbd
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 1004
    write /sys/class/android_usb/android0/idProduct 61F1
    write /sys/class/android_usb/android0/bDeviceClass 239
    write /sys/class/android_usb/android0/bDeviceSubClass 2
    write /sys/class/android_usb/android0/bDeviceProtocol 1
    write /sys/class/android_usb/android0/f_acm/acm_transports smd
    write /sys/class/android_usb/android0/f_diag/clients diag
    write /sys/class/android_usb/android0/functions acm,diag,mtp,adb
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}
# USB midi configuration
on property:sys.usb.config=midi
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18d1
    write /sys/class/android_usb/android0/idProduct 4ee8
    write /sys/class/android_usb/android0/functions ${sys.usb.config}
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}
# USB midi configuration, with adb
on property:sys.usb.config=midi,adb
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 18d1
    write /sys/class/android_usb/android0/idProduct 4ee9
    write /sys/class/android_usb/android0/functions ${sys.usb.config}
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}
on property:sys.usb.config=diag,adb
    stop adbd
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/idVendor 1004
    write /sys/class/android_usb/android0/idProduct 61F1
    write /sys/class/android_usb/android0/bDeviceClass 239
    write /sys/class/android_usb/android0/bDeviceSubClass 2
    write /sys/class/android_usb/android0/bDeviceProtocol 1
    write /sys/class/android_usb/android0/f_acm/acm_transports smd
    write /sys/class/android_usb/android0/f_diag/clients diag
    write /sys/class/android_usb/android0/functions acm,diag,mtp,adb
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}