自定义博客皮肤VIP专享

*博客头图:

格式为PNG、JPG,宽度*高度大于1920*100像素,不超过2MB,主视觉建议放在右侧,请参照线上博客头图

请上传大于1920*100像素的图片!

博客底图:

图片格式为PNG、JPG,不超过1MB,可上下左右平铺至整个背景

栏目图:

图片格式为PNG、JPG,图片宽度*高度为300*38像素,不超过0.5MB

主标题颜色:

RGB颜色,例如:#AFAFAF

Hover:

RGB颜色,例如:#AFAFAF

副标题颜色:

RGB颜色,例如:#AFAFAF

自定义博客皮肤

-+

KEIGEE 之家

两年的目标一定能够达成

  • 博客(2)
  • 资源 (3)
  • 收藏
  • 关注

原创 《嵌入式LINUX应用开发完全手册》-MMU

今天研究MMU,发现在公司改写了程序之后再放到GT2440里不能像在宿舍里的可以流水灯。 现象: 1. 无论怎么改延时函数都无法得到暂停效果; 2. 在延时函数里参照原码多加一个for循环,得到停在延时函数的现象,但怎么改都不能再执行下去; 3. 流水灯是按时高速运行的,四个同时亮; 回来了宿舍,再开自己的VMWARE一看,发现公司用的arm-linux-gcc 是4.4.3版本

2012-12-12 23:18:47 690

转载 WIN 8 安装PL2303驱动

解决 Win8 Pl2302 下不能识别的问题. 官网上说到: “ - Windows 8 is NOT supported in HXA/XA chip versions (will show yellow mark Error Code 10).” 如果它不支持了,难道我就要再装个 2008 R2或win7 之类? 这个问题困扰了我很久很久啊. 原来在win8 RC 版

2012-12-08 23:08:12 6218 3

H2OUVE_100.0.9.2.zip

拯救者15ISK 解锁nvme pcie3.0w 使速度可以到达2300MB/s -? or -h Show this help. -fea Checking whether BIOS support all functions of tool. -r Dump ROM image to file. -a Auto Reset. -l Load Default. -c Load Custom Setting. -gs [-all] Generate setup utility setting to file. (-all: optional , include suppress and grayout setting) -ss Modify setup variable with specified file. -ms -fi -op Modify a setup utility setting. -gd Read image file, and generate setup utility default setting to file. -sd Modify setup utility default setting with specified file on image file. -gstr -s|-b Read image file, and generate setup(-s) or setup browser(-b) string setting. -sstr -s|-b Modify setup or setup browser strings with specified file. -gv Generate variable information to file. -sv Modify variable with specified file. -re -vn -vg Remove a variable by name or GUID. -gi Read image file, and generate variable information to file. -si Modify variable with specified file on image file. -gk Generate BIOS Hotkey setting to file. -mcl List Multi-Config information. -mcl -f|-k Dump the specified config setting to file. -mca -f|-k Add an new config setting with specified file. -mcm -f|-k Modify config setting with specified file. -mcd -f|-k Delete the specified config setting. -lmc [BIOS] -f|-k Load the specified config setting from Multi-Config.(BIOS: optional, it use on Full type to set default setting from BIOS) -i Operation on image. (for Multi-Config command) -out Save as an new ImageFile.

2020-01-02

DJGPP 2.04

《Linux0.01内核分析与操作系统设计配书光盘》中的DJGPP工具

2012-05-10

系统自带/lib/libz.so.1文件

用于修复出现libz.so.1缺失造成机器不能使用的问题

2011-11-15

空空如也

TA创建的收藏夹 TA关注的收藏夹

TA关注的人

提示
确定要删除当前文章?
取消 删除