- package com.luang.util.common;
- import java.util.ArrayList;
- import java.util.Arrays;
- import java.util.List;
- import java.util.Map;
- import java.util.Random;
- import java.util.TreeMap;
- /**
- *
- * ArrayUtil.java
- *
- * @desc 数组操作工具
- * @author Guoxp
- * @datatime Apr 7, 2013 4:03:49 PM
- *
- */
- public class ArrayUtil {
- /**
- * 排序算法的分类如下:
- * 1.插入排序(直接插入排序、折半插入排序、希尔排序);
- * 2.交换排序(冒泡泡排序、快速排序);
- * 3.选择排序(直接选择排序、堆排序);
- * 4.归并排序;
- * 5.基数排序。
- *
- * 关于排序方法的选择:
- * (1)若n较小(如n≤50),可采用直接插入或直接选择排序。
- * (2)若文件初始状态基本有序(指正序),则应选用直接插人、冒泡或随机的快速排序为宜;
- * (3)若n较大,则应采用时间复杂度为O(nlgn)的排序方法:快速排序、堆排序或归并排序。
- *
- */
- /**
- * 交换数组中两元素
- *
- * @since 1.1
- * @param ints
- * 需要进行交换操作的数组
- * @param x
- * 数组中的位置1
- * @param y
- * 数组中的位置2
- * @return 交换后的数组
- */
- public static int[] swap(int[] ints, int x, int y) {
- int temp = ints[x];
- ints[x] = ints[y];
- ints[y] = temp;
- return ints;
- }
- /**
- * 冒泡排序 方法:相邻两元素进行比较 性能:比较次数O(n^2),n^2/2;交换次数O(n^2),n^2/4
- *
- * @since 1.1
- * @param source
- * 需要进行排序操作的数组
- * @return 排序后的数组
- */
- public static int[] bubbleSort(int[] source) {
- for (int i = 1; i < source.length; i++) {
- for (int j = 0; j < i; j++) {
- if (source[j] > source[j + 1]) {
- swap(source, j, j + 1);
- }
- }
- }
- return source;
- }
- /**
- * 直接选择排序法 方法:每一趟从待排序的数据元素中选出最小(或最大)的一个元素, 顺序放在已排好序的数列的最后,直到全部待排序的数据元素排完。
- * 性能:比较次数O(n^2),n^2/2 交换次数O(n),n
- * 交换次数比冒泡排序少多了,由于交换所需CPU时间比比较所需的CUP时间多,所以选择排序比冒泡排序快。
- * 但是N比较大时,比较所需的CPU时间占主要地位,所以这时的性能和冒泡排序差不太多,但毫无疑问肯定要快些。
- *
- * @since 1.1
- * @param source
- * 需要进行排序操作的数组
- * @return 排序后的数组
- */
- public static int[] selectSort(int[] source) {
- for (int i = 0; i < source.length; i++) {
- for (int j = i + 1; j < source.length; j++) {
- if (source[i] > source[j]) {
- swap(source, i, j);
- }
- }
- }
- return source;
- }
- /**
- * 插入排序 方法:将一个记录插入到已排好序的有序表(有可能是空表)中,从而得到一个新的记录数增1的有序表。 性能:比较次数O(n^2),n^2/4
- * 复制次数O(n),n^2/4 比较次数是前两者的一般,而复制所需的CPU时间较交换少,所以性能上比冒泡排序提高一倍多,而比选择排序也要快。
- *
- * @since 1.1
- * @param source
- * 需要进行排序操作的数组
- * @return 排序后的数组
- */
- public static int[] insertSort(int[] source) {
- for (int i = 1; i < source.length; i++) {
- for (int j = i; (j > 0) && (source[j] < source[j - 1]); j--) {
- swap(source, j, j - 1);
- }
- }
- return source;
- }
- /**
- * 快速排序 快速排序使用分治法(Divide and conquer)策略来把一个序列(list)分为两个子序列(sub-lists)。 步骤为:
- * 1. 从数列中挑出一个元素,称为 "基准"(pivot), 2.
- * 重新排序数列,所有元素比基准值小的摆放在基准前面,所有元素比基准值大的摆在基准的后面
- * (相同的数可以到任一边)。在这个分割之后,该基准是它的最后位置。这个称为分割(partition)操作。 3.
- * 递归地(recursive)把小于基准值元素的子数列和大于基准值元素的子数列排序。
- * 递回的最底部情形,是数列的大小是零或一,也就是永远都已经被排序好了
- * 。虽然一直递回下去,但是这个算法总会结束,因为在每次的迭代(iteration)中,它至少会把一个元素摆到它最后的位置去。
- *
- * @since 1.1
- * @param source
- * 需要进行排序操作的数组
- * @return 排序后的数组
- */
- public static int[] quickSort(int[] source) {
- return qsort(source, 0, source.length - 1);
- }
- /**
- * 快速排序的具体实现,排正序
- *
- * @since 1.1
- * @param source
- * 需要进行排序操作的数组
- * @param low
- * 开始低位
- * @param high
- * 结束高位
- * @return 排序后的数组
- */
- private static int[] qsort(int source[], int low, int high) {
- int i, j, x;
- if (low < high) {
- i = low;
- j = high;
- x = source[i];
- while (i < j) {
- while (i < j && source[j] > x) {
- j--;
- }
- if (i < j) {
- source[i] = source[j];
- i++;
- }
- while (i < j && source[i] < x) {
- i++;
- }
- if (i < j) {
- source[j] = source[i];
- j--;
- }
- }
- source[i] = x;
- qsort(source, low, i - 1);
- qsort(source, i + 1, high);
- }
- return source;
- }
- ///
- //排序算法结束
- //
- /**
- * 二分法查找 查找线性表必须是有序列表
- *
- * @since 1.1
- * @param source
- * 需要进行查找操作的数组
- * @param key
- * 需要查找的值
- * @return 需要查找的值在数组中的位置,若未查到则返回-1
- */
- public static int binarySearch(int[] source, int key) {
- int low = 0, high = source.length - 1, mid;
- while (low <= high) {
- mid = (low + high) >>> 1;
- if (key == source[mid]) {
- return mid;
- } else if (key < source[mid]) {
- high = mid - 1;
- } else {
- low = mid + 1;
- }
- }
- return -1;
- }
- /**
- * 反转数组
- *
- * @since 1.1
- * @param source
- * 需要进行反转操作的数组
- * @return 反转后的数组
- */
- public static int[] reverse(int[] source) {
- int length = source.length;
- int temp = 0;
- for (int i = 0; i < length>>1; i++) {
- temp = source[i];
- source[i] = source[length - 1 - i];
- source[length - 1 - i] = temp;
- }
- return source;
- }
- /**
- * 在当前位置插入一个元素,数组中原有元素向后移动;
- * 如果插入位置超出原数组,则抛IllegalArgumentException异常
- * @param array
- * @param index
- * @param insertNumber
- * @return
- */
- public static int[] insert(int[] array, int index, int insertNumber) {
- if (array == null || array.length == 0) {
- throw new IllegalArgumentException();
- }
- if (index-1 > array.length || index <= 0) {
- throw new IllegalArgumentException();
- }
- int[] dest=new int[array.length+1];
- System.arraycopy(array, 0, dest, 0, index-1);
- dest[index-1]=insertNumber;
- System.arraycopy(array, index-1, dest, index, dest.length-index);
- return dest;
- }
- /**
- * 整形数组中特定位置删除掉一个元素,数组中原有元素向前移动;
- * 如果插入位置超出原数组,则抛IllegalArgumentException异常
- * @param array
- * @param index
- * @return
- */
- public static int[] remove(int[] array, int index) {
- if (array == null || array.length == 0) {
- throw new IllegalArgumentException();
- }
- if (index > array.length || index <= 0) {
- throw new IllegalArgumentException();
- }
- int[] dest=new int[array.length-1];
- System.arraycopy(array, 0, dest, 0, index-1);
- System.arraycopy(array, index, dest, index-1, array.length-index);
- return dest;
- }
- /**
- * 2个数组合并,形成一个新的数组
- * @param array1
- * @param array2
- * @return
- */
- public static int[] merge(int[] array1,int[] array2) {
- int[] dest=new int[array1.length+array2.length];
- System.arraycopy(array1, 0, dest, 0, array1.length);
- System.arraycopy(array2, 0, dest, array1.length, array2.length);
- return dest;
- }
- /**
- * 数组中有n个数据,要将它们顺序循环向后移动k位,
- * 即前面的元素向后移动k位,后面的元素则循环向前移k位,
- * 例如,0、1、2、3、4循环移动3位后为2、3、4、0、1。
- * @param array
- * @param offset
- * @return
- */
- public static int[] offsetArray(int[] array,int offset){
- int length = array.length;
- int moveLength = length - offset;
- int[] temp = Arrays.copyOfRange(array, moveLength, length);
- System.arraycopy(array, 0, array, offset, moveLength);
- System.arraycopy(temp, 0, array, 0, offset);
- return array;
- }
- /**
- * 随机打乱一个数组
- * @param list
- * @return
- */
- public static List shuffle(List list){
- java.util.Collections.shuffle(list);
- return list;
- }
- /**
- * 随机打乱一个数组
- * @param array
- * @return
- */
- public int[] shuffle(int[] array) {
- Random random = new Random();
- for (int index = array.length - 1; index >= 0; index--) {
- // 从0到index处之间随机取一个值,跟index处的元素交换
- exchange(array, random.nextInt(index + 1), index);
- }
- return array;
- }
- // 交换位置
- private void exchange(int[] array, int p1, int p2) {
- int temp = array[p1];
- array[p1] = array[p2];
- array[p2] = temp;
- }
- /**
- * 对两个有序数组进行合并,并将重复的数字将其去掉
- *
- * @param a:已排好序的数组a
- * @param b:已排好序的数组b
- * @return 合并后的排序数组
- */
- private static List<Integer> mergeByList(int[] a, int[] b) {
- // 用于返回的新数组,长度可能不为a,b数组之和,因为可能有重复的数字需要去掉
- List<Integer> c = new ArrayList<Integer>();
- // a数组下标
- int aIndex = 0;
- // b数组下标
- int bIndex = 0;
- // 对a、b两数组的值进行比较,并将小的值加到c,并将该数组下标+1,
- // 如果相等,则将其任意一个加到c,两数组下标均+1
- // 如果下标超出该数组长度,则退出循环
- while (true) {
- if (aIndex > a.length - 1 || bIndex > b.length - 1) {
- break;
- }
- if (a[aIndex] < b[bIndex]) {
- c.add(a[aIndex]);
- aIndex++;
- } else if (a[aIndex] > b[bIndex]) {
- c.add(b[bIndex]);
- bIndex++;
- } else {
- c.add(a[aIndex]);
- aIndex++;
- bIndex++;
- }
- }
- // 将没有超出数组下标的数组其余全部加到数组c中
- // 如果a数组还有数字没有处理
- if (aIndex <= a.length - 1) {
- for (int i = aIndex; i <= a.length - 1; i++) {
- c.add(a[i]);
- }
- // 如果b数组中还有数字没有处理
- } else if (bIndex <= b.length - 1) {
- for (int i = bIndex; i <= b.length - 1; i++) {
- c.add(b[i]);
- }
- }
- return c;
- }
- /**
- * 对两个有序数组进行合并,并将重复的数字将其去掉
- * @param a:已排好序的数组a
- * @param b:已排好序的数组b
- * @return合并后的排序数组,返回数组的长度=a.length + b.length,不足部分补0
- */
- private static int[] mergeByArray(int[] a, int[] b){
- int[] c = new int[a.length + b.length];
- int i = 0, j = 0, k = 0;
- while (i < a.length && j < b.length) {
- if (a[i] <= b[j]) {
- if (a[i] == b[j]) {
- j++;
- } else {
- c[k] = a[i];
- i++;
- k++;
- }
- } else {
- c[k] = b[j];
- j++;
- k++;
- }
- }
- while (i < a.length) {
- c[k] = a[i];
- k++;
- i++;
- }
- while (j < b.length) {
- c[k] = b[j];
- j++;
- k++;
- }
- return c;
- }
- /**
- * 对两个有序数组进行合并,并将重复的数字将其去掉
- * @param a:可以是没有排序的数组
- * @param b:可以是没有排序的数组
- * @return合并后的排序数组
- * 打印时可以这样:
- * Map<Integer,Integer> map=sortByTreeMap(a,b);
- Iterator iterator = map.entrySet().iterator();
- while (iterator.hasNext()) {
- Map.Entry mapentry = (Map.Entry)iterator.next();
- System.out.print(mapentry.getValue()+" ");
- }
- */
- private static Map<Integer,Integer> mergeByTreeMap(int[] a, int[] b) {
- Map<Integer,Integer> map=new TreeMap<Integer,Integer>();
- for(int i=0;i<a.length;i++){
- map.put(a[i], a[i]);
- }
- for(int i=0;i<b.length;i++){
- map.put(b[i], b[i]);
- }
- return map;
- }
- /**
- * 在控制台打印数组,之间用逗号隔开,调试时用
- * @param array
- */
- public static String print(int[] array){
- StringBuffer sb=new StringBuffer();
- for(int i=0;i<array.length;i++){
- sb.append(","+array[i]);
- }
- System.out.println(sb.toString().substring(1));
- return sb.toString().substring(1);
- }
- public static void main(String[] args){
- ArrayUtil util=new ArrayUtil();
- int[] array0={21,24,13,46,35,26,14,43,11};
- int[] array1={1,2,3,4,5,6};
- int[] array2={11,22,33,44,55,66};
- int[] temp=util.quickSort(array0);
- print(temp);
- }
- }
【转】Java工具类——数组操作ArrayUtil
最新推荐文章于 2024-08-02 20:36:52 发布