修改rt5350 openwrt的 mac地址

mac地址是从factory分区。也就是mtdblock2中读出来的.这个分区是只读分区，那怎么修改呢

/target/linux/ramips/dts/MPRA2.dts"

factory: partition@40000 {
                                        label = "factory";
                                        reg = <0x40000 0x10000>;

                                        read-only;
                                };

写出厂设置分区的方法:

读出全部数据    dd if=/dev/mtd2 of=/tmp/factory.bin
修改factory.bin(16进制编辑)
写回数据mtd write /tmp/factory.bin factory