HCIP作业4

实验步骤：

第一步

给PC1和PC2和PC3配地址

第二步给R1到R5配置接口IP地址

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip ad 192.168.1.254 24

R1：[R1-GigabitEthernet0/0/0]int s4/0/0
[R1-Serial4/0/0]ip ad 15.1.1.1 24
[R1-Serial4/0/0]dis ip int b    
[R1-Serial4/0/0]q
[R1]dis ip int b    
[R1]dis ip int brief 

R2：[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip ad 192.168.2.254 24

[R2-GigabitEthernet0/0/0]int s4/0/0
[R2-Serial4/0/0]ip ad 25.1.1.2 24
[R2-Serial4/0/0]q
[R2]dis ip int b    
[R2]dis ip int brief 

R3：[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip ad 192.168.3.254 24

[R3-GigabitEthernet0/0/0]int s4/0/0
[R3-Serial4/0/0]ip ad 34.1.1.3 24
[R3-Serial4/0/0]q
[R3]dis ip int b    
[R3]dis ip int brief 

R4：[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip ad 192.168.4.254 24

[R4-GigabitEthernet0/0/0]int s4/0/0
[R4-Serial4/0/0]int g0/0/0
[R4-GigabitEthernet0/0/0]ip ad 45.1.1.4 24
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip ad 192.168.4.254 24

[R5]int s4/0/1
[R5-Serial4/0/1]ip ad 15.1.1.5 24

[R5-Serial4/0/1]int s3/0/1
[R5-Serial3/0/1]ip ad 25.1.1.5 24

R5：[R5-Serial3/0/1]int s4/0/0
[R5-Serial4/0/0]ip ad 35.1.1.5 24

[R5-Serial4/0/0]int g0/0/0
[R5-GigabitEthernet0/0/0]ip ad 45.1.1.5 24

[R5-GigabitEthernet0/0/0]int l0
[R5-LoopBack0]ip ad 5.5.5.5 24

第三步：把私网和公网弄通 私网都是直连就不需要 就只弄公网就可以

配静态缺省：[R1]ip rou    
[R1]ip route-s    
[R1]ip route-static 0.0.0.0 0 15.1.1.5

[R2]ip rou    
[R2]ip route-s    
[R2]ip route-static 0.0.0.0 0 25.1.1.5

R3]ip rou    
[R3]ip route-s    
[R3]ip route-static 0.0.0.0 0 35.1.1.5

[R4]ip rou    
[R4]ip route-s    
[R4]ip route-static 0.0.0.0 0 45.1.1.5

第四步：PPP的认证

R5为主认证方

R5：[R5]aa
[R5-aaa]lo    
[R5-aaa]local-user wangdaye pa    
[R5-aaa]local-user wangdaye password c    
[R5-aaa]local-user wangdaye password cipher wdy12345
Info: Add a new user.
[R5-aaa]lo    
[R5-aaa]local-user wangdaye se    
[R5-aaa]local-user wangdaye service-type ppp
[R5-aaa]q
[R5]int s4/0/1
[R5-Serial4/0/1]ppp au    
[R5-Serial4/0/1]ppp authentication-mode pap

R1：[R1]int s4/0/0
[R1-Serial4/0/0]ppp pap lp    
[R1-Serial4/0/0]ppp pap lo    
[R1-Serial4/0/0]ppp pap local-user wangdaye pa    
[R1-Serial4/0/0]ppp pap local-user wangdaye password ch    
[R1-Serial4/0/0]ppp pap local-user wangdaye password ci    
[R1-Serial4/0/0]ppp pap local-user wangdaye password cipher wdy12345

第五步：R2和R5之间使用ppp的chap认证

R5为主认证方

[R5]aaa
[R5-aaa]lo    
[R5-aaa]local-user zhangdaye pass    
[R5-aaa]local-user zhangdaye password ci    
[R5-aaa]local-user zhangdaye password cipher zdy12345
Info: Add a new user.
[R5-aaa]lo    
[R5-aaa]local-user zhangdaye se    
[R5-aaa]local-user zhangdaye service-type ppp
[R5-aaa]q
[R5]int s3/0/1
[R5-Serial3/0/1]ppp au    
[R5-Serial3/0/1]ppp authentication-mode  chap

[R2]int s4/0/0
[R2-Serial4/0/0]chap u    
[R2-Serial4/0/0]ppp chap u    
[R2-Serial4/0/0]ppp chap user  zhangdaye
[R2-Serial4/0/0]ppp chap pa    
[R2-Serial4/0/0]ppp chap password ci    
[R2-Serial4/0/0]ppp chap password cipher zdy12345
[R2-Serial4/0/0]shutdown

第六步 R3和R5使用HDLC封装

[R3]int s4/0/0
[R3-Serial4/0/0]link    
[R3-Serial4/0/0]link-protocol ?
  fr    Select FR as line protocol
  hdlc  Enable HDLC protocol
  lapb  LAPB(X.25 level 2 protocol)
  ppp   Point-to-Point protocol 
  sdlc  SDLC(Synchronous Data Line Control) protocol 
  x25   X.25 protocol
[R3-Serial4/0/0]link-protocol hdlc

[R5-Serial3/0/1]int s4/0/0
[R5-Serial4/0/0]link    
[R5-Serial4/0/0]link-protocol hdlc

第七步：给R1、R2、R3构建一个MGRE环境

先进入隧道接口

定义隧道类型

将R1、R2、R3三个加入到一个nhrp域中

[R1]int t    
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip ad 10.1.2.1 24
[R1-Tunnel0/0/0]tu    
[R1-Tunnel0/0/0]tunnel-protocol gre    
[R1-Tunnel0/0/0]tunnel-protocol gre p    
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/0]sou    
[R1-Tunnel0/0/0]source 15.1.1.1
Mar 30 2024 14:49:28-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]
[R1-Tunnel0/0/0]nhrp n    
[R1-Tunnel0/0/0]nhrp network-id 100

[R2]int t    
[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip ad 10.1.1.2 24
[R2-Tunnel0/0/0]tu    
[R2-Tunnel0/0/0]tunnel-protocol gre    
[R2-Tunnel0/0/0]tunnel-protocol gre p    
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]sou    
[R2-Tunnel0/0/0]source s    
[R2-Tunnel0/0/0]source Serial 4/0/0
Mar 30 2024 14:51:40-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]n    
[R2-Tunnel0/0/0]nh    
[R2-Tunnel0/0/0]nhrp nt    
[R2-Tunnel0/0/0]nhrp ne    
[R2-Tunnel0/0/0]nhrp network-id 100

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip ad 10.1.2.3 24
[R3-Tunnel0/0/0]t    
[R3-Tunnel0/0/0]tu    
[R3-Tunnel0/0/0]tunnel-protocol gre    
[R3-Tunnel0/0/0]tunnel-protocol gre p    
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]sou    
[R3-Tunnel0/0/0]source z    
[R3-Tunnel0/0/0]source s    
[R3-Tunnel0/0/0]source Serial 4/0/0
Mar 30 2024 14:52:27-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R3-Tunnel0/0/0]nhrp b    
[R3-Tunnel0/0/0]nhrp n    
[R3-Tunnel0/0/0]nhrp network-id 100

R1和R4随后建立gre隧道

[R1]int t0/0/1
[R1-Tunnel0/0/1]ip ad 10.1.1.1 24
[R1-Tunnel0/0/1]tu    
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]sou    
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]dest    
[R1-Tunnel0/0/1]destination 45.1.1.4

[R4]int t    
[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip ad 10.1.1.4 24
[R4-Tunnel0/0/1]tu    
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]sou    
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]dest    
[R4-Tunnel0/0/1]destination 15.1.1.1

第八步：RIP使私网全网可达

RIP的宣告是按照主类宣告

比如说10.0.0.0 就把10.1.2.0和10.1.1.0都宣告了

开启隧道口的广播功能

关闭R1的水平分割机制

[R1-rip-1]v 2
[R1-rip-1]undo s    
[R1-rip-1]undo su    
[R1-rip-1]undo summary 
[R1-rip-1]netw 192.168.1.0
[R1-rip-1]netw 10.0.0.0
[R1-rip-1]q
[R1]int t    
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp en    
[R1-Tunnel0/0/0]nhrp entry mu    
[R1-Tunnel0/0/0]nhrp entry multicast dy    
[R1-Tunnel0/0/0]nhrp entry multicast dynamic

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo su    
[R2-rip-1]undo summary 
[R2-rip-1]netw 192.168.2.0
[R2-rip-1]netw 10.0.0.0
[R2-rip-1]q
[R2]int t    
[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]nhrp en    
[R2-Tunnel0/0/0]nhrp entry mu    
[R2-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 re    
[R2-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register 

[R3]rip 1
[R3-rip-1]v 2
[R3-rip-1]undo su    
[R3-rip-1]undo summary 
[R3-rip-1]netw 192.168.3.0
[R3-rip-1]netw 10.0.0.0
[R3-rip-1]q
[R3]int t    
[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register 
[R3-Tunnel0/0/0]undo rip split-horizon

[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo su    
[R4-rip-1]undo summary 
[R4-rip-1]netw 192.168.4.0
[R4-rip-1]netw 10.0.0.0

最后一步做nat server

[R1]acl 2000
[R1-acl-basic-2000]per    
[R1-acl-basic-2000]ru    
[R1-acl-basic-2000]rule per    
[R1-acl-basic-2000]rule permit sou    
[R1-acl-basic-2000]rule permit source 192.168.1.0 0 0.0.0.255
                                                    ^
Error:Too many parameters found at '^' position.
[R1-acl-basic-2000]rule permit source 192.168.1.0  0.0.0.255
[R1-acl-basic-2000]q
[R1]int s    
[R1]int Serial 4/0/0
[R1-Serial4/0/0]nat o    
[R1-Serial4/0/0]nat outbound 2000

[R2]acl 2000
[R2-acl-basic-2000]rule pe    
[R2-acl-basic-2000]rule permit sou    
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]int s    
[R2-acl-basic-2000]q
[R2]int s    
[R2]int Serial 4/0/0
[R2-Serial4/0/0]nat o    
[R2-Serial4/0/0]nat outbound 2000

[R3]acl 2000
[R3-acl-basic-2000]rule per    
[R3-acl-basic-2000]rule permit sou    
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]q
[R3]int s    
[R3]int Serial 4/0/0
[R3-Serial4/0/0]nat 0    
[R3-Serial4/0/0]nat o    
[R3-Serial4/0/0]nat outbound 2000

[R4]acl 2000
[R4-acl-basic-2000]rule pe    
[R4-acl-basic-2000]rule permit sou    
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat o    
[R4-GigabitEthernet0/0/0]nat outbound 2000
[R4-GigabitEthernet0/0/0]

最后达到全网通