DHCP配置的三种方式

1.DHCP中继

2.配置命令:sys

int g0/0/0

ip add 192.168.2.2 24

dhcp enable

ip pool pool1

net 192.168.1.0 mask 24

dns-list 8.8.8.8

gateway-list 192.168.1.1

dhcp select global //启用全局地址池

ip route-static 192.168.1.0 24 192.168.2.254

//配置一条去1.0网段的静态路由

sys

sys sw2

vlan batch 10 996

int vlanif10

ip add 192.168.1.1 24

ip add 192.168.1.2 24

int vlan996

ip add 192.168.2.254 24

int g0/0/1

port link-type access

port default vlan 10

int g0/0/2

port link-type access

port default vlan 10

int g0/0/3

port link-type access

port default vlan 996

dhcp enable

int vlanif10

dhcp select relay  //启用dhcp中继

dhcp relay server-ip 192.168.2.2

3.打开pc的dhcp获取功能输入ipconfig获取地址

 

 （华为默认是末尾地址，我这里没有排除地址和设置dhcp时间默认八天。）

1.DHCP接口配置和全局配置

 2.配置命令:

sys

sys sw1

vlan batch 10 20

int g0/0/1

port link-type access

port default vlan 10

port link-type access

port default vlan 20

//划分access口并让vlan 10 20的流量进入sw1

int vlanif10

ip add 192.168.10.1 24

int vlanif20

ip add 192.168.20.1 24

dhcp enable

int vlanif10

dhcp select interface

dhcp server dns 8.8.8.8

dhcp excluded-ip-address 192.168.10.101 192.168.10.150

//基于接口配置

ip pool pool1

net 192.168.20.0 mask 24

dns-list 8.8.8.8

gateway-list 192.168.20.1

[sw1-Vlanif20]dhcp select global //vlan接口下配置dhcp全局发放

//基于全局地址池配置

 

 （获取到10和20网段的地址）