AtCoder Beginner Contest 347 A~F

AtCoder Beginner Contest 347 A~F - 知乎 (zhihu.com)

Tasks - AtCoder Beginner Contest 347

A.Divisible(循环)

代码

#include<bits/stdc++.h>
using namespace std;

void solve() {
    int n, k;
    cin >> n >> k;
    for (int i = 0; i < n; i++) {
        int a;
        cin >> a;
        if (a % k == 0) {
            cout << a / k << ' ';
        }
    }
    cout << endl;
}

int main() {
    solve();
    return 0;
}

B.Substring(枚举，set)

代码

#include<bits/stdc++.h>
using namespace std;

set<string> St;
void solve() {
    string s;
    cin >> s;
    int n = s.size();
    for (int i = 0; i < n; i++) {
        string str = "";
        for (int j = i; j < n; j++) {
            str += s[j];
            St.insert(str);
        }
    }
    cout << St.size() << endl;
}

int main() {
    solve();
    return 0;
}

C.Ideal Holidays(哈希)

分析

坑点:没有告诉你当天是星期几，那么我们可以认为，只要存在一种方案使得计划全部成立即可，开始是星期几我们可以随意决定。

由于星期数是循环的，即以�+�为一个周期进行循环，那么我们可以利用类似哈希表的思想，让所有的天数通过取模落在�+�天内，并记录所有取模后的结果。

然后，只要满足以下两个条件之一，就表示一定存在合法的方案：

条件1：取模后的最大最小值之差小于�

如下图，由于我们可以决定开始时是星期几，那么只要取模后的区间大小小于等于�(即取模后的最大最小值之差小于�)，那么就可以将区间最小值修改为一周的开始，此时所有取模后的结果均会落在前�天内。

条件2：将数组排序，存在数组中相邻两项之差大于�

如下图，虽然最大最小值之差很大，但由于中间空出了一段长度大于等于�的区间，那么通过循环让这段空出的区间来到后半部分，那么所有计划也会落在前�天内。

如果上述两种情况均不满足，那么就表示当前情况无解。

代码

#include<bits/stdc++.h>
using namespace std;
typedef long long ll;

vector<int> v;

void solve() {
    ll n, a, b;
    cin >> n >> a >> b;
    ll minn = 1e18, maxn = -1e18;
    for (int i = 0; i < n; i++) {
        ll t;
        cin >> t;
        t--;
        t %= (a + b);
        v.push_back(t);
        maxn = max(maxn, t);
        minn = min(minn, t);
    }
    sort(v.begin(), v.end());
    for (int i = 1; i < n; i++) {
        if (v[i] - v[i - 1] > b) {
            cout << "Yes" << endl;
            return;
        }
    }
    if (maxn - minn >= a) cout << "No" << endl;
    else cout << "Yes" << endl;
}

int main() {
    solve();
    return 0;
}

D.Popcount and XOR(思维)

代码

#include<bits/stdc++.h>

typedef long long LL;
using namespace std;

int x[105], y[105], c[105];

void solve() {
    LL a, b, C;
    cin >> a >> b >> C;
    int pos = 0, cnt = 0;
    while (C) {
        if (C & 1) cnt++;
        c[pos++] = C % 2;
        C /= 2;
    }
    for (int i = 0; i <= 62; i++) {
        if (c[i] == 1) {
            if (a > b) {
                x[i] = 1;
                a--;
            } else {
                y[i] = 1;
                b--;
            }
        }
    }
    for (int i = 0; i <= 62; i++) {
        if (x[i] + y[i] == 0 && a > 0 && b > 0) {
            a--, b--;
            x[i] = y[i] = 1;
        }
    }
    if (a != 0 || b != 0) {
        cout << -1 << endl;
        return;
    }
    LL X = 0, Y = 0;
    for (int i = 62; i >= 0; i--) {
        X = X * 2 + x[i];
        Y = Y * 2 + y[i];
    }
    cout << X << ' ' << Y << endl;
}

int main() {
    solve();
    return 0;
}

E.Set Add Query

代码

#include<bits/stdc++.h>

typedef long long LL;
using namespace std;
const int N = 2e5 + 5e2;

set<int> S;

LL n, q, sz[N], pre[N], ans[N];
vector<int> in[N], out[N];

void solve() {
    cin >> n >> q;
    for (int i = 1; i <= q; i++) {
        int x;
        cin >> x;
        if (S.find(x) == S.end()) {
            S.insert(x);
            in[x].push_back(i);
        } else {
            S.erase(x);
            out[x].push_back(i);
        }
        sz[i] = S.size();
        pre[i] = pre[i - 1] + sz[i];
    }
    for (int i = 1; i <= n; i++) out[i].push_back(q + 1);
    for (int i = 1; i <= n; i++) {
        int len = in[i].size();
        for (int j = 0; j < len; j++) {
            ans[i] += pre[out[i][j] - 1] - pre[in[i][j] - 1];
        }
        cout << ans[i] << ' ';
    }
    cout << endl;
}

int main() {
    solve();
    return 0;
}

F.Non-overlapping Squares（思维）

分析

对于所有的方案，必然可以将三个网格的位置分为以下六种。

代码（来自官方题解）

//from atcoder Offcial
#include <iostream>
#include <vector>
#include <ranges>
#include <numeric>
#include <algorithm>

int main() {
    using namespace std;
    static constexpr auto chmax{[](auto &&x, const auto &y) {
        if (x < y) x = y;
        return x;
    }};
    static constexpr auto max{[](const auto &x, const auto &y) {
        if (x < y) return y;
        return x;
    }};

    unsigned N, M;
    cin >> N >> M;

    // sum[i][j] := the sum of the M x M square whose top-left cell is (i, j)
    auto sum{[N, M] {
        vector A(N + 1, vector<unsigned long>(N + 1));
        for (auto &&row: A | views::take(N))
            for (auto &&a: row | views::take(N))
                cin >> a;

        // Let A[i][j] ← ∑_{i≤k,j≤l} A[k][l]
        for (unsigned row_index{N}; auto &&row : A | views::reverse){
        inclusive_scan(rbegin(row), rend(row), rbegin(row), plus<>{});
        if (row_index < N)
            ranges::transform(row, A[row_index + 1], begin(row), plus<>{});
        --row_index;
    }

        // sum[i][j] = A[i][j] - A[i+M][j] - A[i][j+M] + A[i+M][j+M]
        vector sum(N - M + 1, vector<unsigned long>(N - M + 1));
        for (unsigned i{}; i <= N - M; ++i)
            for (unsigned j{}; j <= N - M; ++j)
                sum[i][j] = A[i][j] - A[i + M][j] - A[i][j + M] + A[i + M][j + M];
        return sum;
    }()};

    // cumulative max of sum[i][j] from the top-left
    // m[i][j] = max_{k≤i,l≤j} sum[k][l]
    const auto max_UL{[](auto cells) {
        for (unsigned row_index{}; auto &&row : cells){
        inclusive_scan(begin(row), end(row), begin(row), max);
        if (row_index)
            ranges::transform(row, cells[row_index - 1], begin(row), max);
        ++row_index;
    }
        return cells;
    }};

    // flip the board horizontally
    const auto h_flip{[](auto &&cells) {
        for (auto &&row: cells)
            ranges::reverse(row);
        return cells;
    }};
    // flip the board vertically
    const auto v_flip{[](auto &&cells) {
        ranges::reverse(cells);
        return cells;
    }};

    const auto upper_left{max_UL(sum)}; // cumulative max from the top-left
    h_flip(sum); // flip horizontally
    const auto upper_right{h_flip(max_UL(sum))}; // cumulative max from the top-right
    v_flip(sum); // flip vertically
    const auto lower_right{h_flip(v_flip(max_UL(sum)))}; // cumulative max from the bottom-right
    h_flip(sum); // flip vertically
    const auto lower_left{v_flip(max_UL(sum))}; // cumulative max from the bottom-left
    v_flip(sum); // return to the original state

    unsigned long ans{};

    // Fix a square
    for (unsigned i{}; i < N - M + 1; ++i)
        for (unsigned j{}; j < N - M + 1; ++j) {
            if (M <= i && i + M < N - M + 1) // three squares arranged vertically; fix the center square
                chmax(ans, upper_left[i - M].back() + sum[i][j] + lower_right[i + M].front());
            if (M <= j && j + M < N - M + 1) // three squares arranged horizontally; fix the center square
                chmax(ans, upper_left.back()[j - M] + sum[i][j] + lower_right.front()[j + M]);
            if (M <= i) { // T-shaped
                if (j + M < N - M + 1) // bottom left
                    chmax(ans, upper_left[i - M].back() + lower_right[i][j + M] + sum[i][j]);
                if (M <= j) // bottom right
                    chmax(ans, upper_left[i - M].back() + lower_left[i][j - M] + sum[i][j]);
            }
            if (M <= j) { // ト-shaped
                if (i + M < N - M + 1) // bottom right
                    chmax(ans, lower_left.front()[j - M] + lower_right[i + M][j] + sum[i][j]);
                if (M <= i) // top right
                    chmax(ans, lower_left.front()[j - M] + upper_right[i - M][j] + sum[i][j]);
            }
            if (i + M < N - M + 1) { // 亠 -shaped
                if (j + M < N - M + 1) // top-left
                    chmax(ans, lower_right[i + M].front() + upper_right[i][j + M] + sum[i][j]);
                if (M <= j) // top-right
                    chmax(ans, lower_right[i + M].front() + upper_left[i][j - M] + sum[i][j]);

            }
            if (j + M < N - M + 1) { // ㅓ -shaped
                if (i + M < N - M + 1) // top-left
                    chmax(ans, upper_right.back()[j + M] + lower_left[i + M][j] + sum[i][j]);
                if (M <= i) // bottom-left
                    chmax(ans, upper_right.back()[j + M] + upper_left[i - M][j] + sum[i][j]);
            }
        }

    cout << ans << endl;
    return 0;
}