OSPF实验

1. R6为ISP只能配置IP地址，R1-R5的环回为私有网段
2. R1/4/5为全连的MGRE结构，R1/2/3为星型的拓扑结构，R1为中心站点
3. 所有私有网段可以互相通讯，私有网段使用osPF完成。

接口IP地址配置

[r1]int g0/0/0

[r1-GigabitEthernet0/0/0]ip add 16.0.0.1 24

[r1-GigabitEthernet0/0/0]int g0/0/1

[r1-GigabitEthernet0/0/1]ip add 66.0.0.1 24

[r1-GigabitEthernet0/0/1]int l 0

[r1-LoopBack0]ip add 192.168.1.1 24

[r2]int g0/0/0

[r2-GigabitEthernet0/0/0]ip add 26.0.0.1 24

[r2-GigabitEthernet0/0/0]int l 0

[r2-LoopBack0]ip add 192.168.2.1 24

[r3]int g 0/0/0

[r3-GigabitEthernet0/0/0]ip add 36.0.0.1 24

[r3-GigabitEthernet0/0/0]int l 0

[r3-LoopBack0]ip add 192.168.3.1 24

[r4]int g0/0/0

[r4-GigabitEthernet0/0/0]ip add 46.0.0.1 24

[r4-GigabitEthernet0/0/0]int l 0

[r4-LoopBack0]ip add 192.168.4.1 24

[r5]int g0/0/0

[r5-GigabitEthernet0/0/0]ip add 56.0.0.1 24

[r5-GigabitEthernet0/0/0]int l 0

[r5-LoopBack0]ip add 192.168.5.1 24

[r6]int g0/0/0

[r6-GigabitEthernet0/0/0]ip add 16.0.0.2 24

[r6-GigabitEthernet0/0/0]int g0/0/1

[r6-GigabitEthernet0/0/1]ip add 66.0.0.2 24

[r6-GigabitEthernet0/0/1]int g0/0/2

[r6-GigabitEthernet0/0/2]ip add 56.0.0.2 24

[r6-GigabitEthernet0/0/2]int g4/0/0

[r6-GigabitEthernet4/0/0]ip add 46.0.0.2 24

[r6-GigabitEthernet4/0/0]int g3/0/0

[r6-GigabitEthernet3/0/0]ip add 36.0.0.2 24

[r6-GigabitEthernet3/0/0]int g2/0/0

[r6-GigabitEthernet2/0/0]ip add 26.0.0.2 24

缺省

[r1]ip route-static 0.0.0.0 0 16.0.0.2

[r1]ip route-static 0.0.0.0 0 66.0.0.2

[r2]ip route-static 0.0.0.0 0 26.0.0.2

[r3]ip route-static 0.0.0.0 0 36.0.0.2

[r4]ip route-static 0.0.0.0 0 46.0.0.2

[r5]ip route-static 0.0.0.0 0 56.0.0.2

 R1/4/5为全连的MGRE结构

R1/2/3为星型的拓扑结构 

Ospf配置 

 

 修改接口为broadcast