目录
一、架构/环境
服务器 | IP地址 | 软件包 | 配置文件 |
宿主机 | 172.17.0.1 | centos:7(couchbase/centos7-systemd) | / |
nginx容器 | 172.17.0.2 | nginx-1.12.0.tar.gz、Discuz_X3.3_SC_UTF8.zip | Dockerfile、nginx.conf |
mysql容器 | 172.17.0.3 | mysql-boost-5.7.20.tar.gz | Dockerfile、my.cnf |
php容器 | 172.17.0.4 | php-7.1.10.tar.bz2 | Dockerfile、php.ini、php-fpm.conf、www.conf |
二、搭建步骤
1.nginx容器
cd /opt/nginx
vim Dockerfile
#创建nginx的Dockerfile
FROM centos:7 #镜像来源
MAINTAINER this is nginx image <lnmp> #注释
RUN yum install -y pcre-devel zlib-devel gcc gcc-c++ make;useradd -M -s /sbin/nologin nginx #解决依赖
ADD nginx-1.12.0.tar.gz /usr/local/src/ #解压到指定目录
WORKDIR /usr/local/src/nginx-1.12.0 #移动工作目录
RUN ./configure \
--prefix=/usr/local/nginx \
--user=nginx \
--group=nginx \
--with-http_stub_status_module;make -j 2 && make install #编译安装
ENV PATH /usr/local/nginx/sbin:$PATH #生成环境变量
ADD nginx.conf /usr/local/nginx/conf/ #添加配置文件
ADD upload.tar.gz /usr/local/nginx/html/ #添加应用
RUN chmod 777 -R /usr/local/nginx/html/ #授权
EXPOSE 80 #指定端口
VOLUME [ "/usr/local/nginx/html/" ] #创建挂载点
CMD [ "/usr/local/nginx/sbin/nginx","-g","daemon off;" ] #开机自启
vim nginx.conf
#创建nginx配置文件
worker_pocesses 1;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
keepalive_timeout 65;
server {
listen 80;
server_name localhost;
charset utf-8;
location / {
root html;
index index.html index.php;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
location ~ \.php$ {
root html;
fastcgi_pass 172.17.0.4:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/local/nginx/html$fastcgi_script_name;
include fastcgi_params;
}
}
}
#创建nginx镜像(注意最后有个点,不可省略)
docker build -t nginx:lnmp .
docker images
#启动nginx容器并且为容器指定IP地址
docker run -d --name nginx -p 80:80 -m 500m --memory-swap 1g --ip 172.17.0.2 nginx:lnmp
#验证nginx容器是否搭建成功
curl 192.168.33.1:80 或浏览器访问
2.mysql容器
#创建mysql容器
cd /opt/mysql
#编写Dockerfile配置文件
vim Dockerfile
FROM centos:7 #镜像来源
MAINTAINER this is mysql image <wl> #注释
RUN yum -y install gcc gcc-c++ ncurses ncurses-devel bison cmake make #解决依赖
RUN useradd -M -s /sbin/nologin mysql #创建用户
ADD mysql-boost-5.7.20.tar.gz /usr/local/src/ #解压
WORKDIR /usr/local/src/mysql-5.7.20/ #移动工作目录
RUN cmake \
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
-DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock \
-DSYSCONFDIR=/etc \
-DSYSTEMD_PID_DIR=/usr/local/mysql \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci \
-DWITH_INNOBASE_STORAGE_ENGINE=1 \
-DWITH_ARCHIVE_STORAGE_ENGINE=1 \
-DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
-DWITH_PERFSCHEMA_STORAGE_ENGINE=1 \
-DMYSQL_DATADIR=/usr/local/mysql/data \
-DWITH_BOOST=boost \
-DWITH_SYSTEMD=1 && make -j 4 && make install #编译安装
RUN chown -R mysql:mysql /usr/local/mysql/ #授权
RUN rm -rf /etc/my.cnf #清除源文件
ADD my.cnf /etc/ #添加新配置文件
RUN chown mysql:mysql /etc/my.cnf #更改属主属组
ENV PATH=/usr/local/mysql/bin:/usr/local/mysql/lib:$PATH #设置环境变量
WORKDIR /usr/local/mysql/ #移动工作目录
RUN bin/mysqld \
--initialize-insecure \
--user=mysql \
--basedir=/usr/local/mysql \
--datadir=/usr/local/mysql/data #指定用户及数据存放目录
RUN cp /usr/local/mysql/usr/lib/systemd/system/mysqld.service /usr/lib/systemd/system/
EXPOSE 3306 #端口
CMD /usr/local/mysql/bin/mysqld && systemctl enable mysqld #设置开机自启
#编写mysql配置文件
vim my.cnf
[client]
port = 3306
socket=/usr/local/mysql/mysql.sock[mysqld]
user = mysql
basedir=/usr/local/mysql
datadir=/usr/local/mysql/data
port = 3306
character-set-server=utf8
pid-file = /usr/local/mysql/mysqld.pid
socket=/usr/local/mysql/mysql.sock
bind-address = 0.0.0.0
skip-name-resolve
max_connections=2048
default-storage-engine=INNODB
max_allowed_packet=16M
server-id = 1sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,PIPES_AS_CONCAT,ANSI_QUOTES
#生成mysql镜像文件并启动镜像容器(需要在对应目录中完成)
docker build -t mysql:lnmp .
docker run --name=mysql -d --privileged --device-write-bps /dev/sda:10M -v /usr/local/mysql --ip 172.17.0.3 mysql:lnmp
3.php容器
cd /opt/php
#编辑php的Dockerfile
vim Dockerfile
FROM centos:7 #镜像来源
MAINTAINER this is php image <lnmp> #注释
RUN yum install -y gd \
libjpeg libjpeg-devel \
libpng libpng-devel \
freetype freetype-devel \
libxml2 libxml2-devel \
zlib zlib-devel \
curl curl-devel \
openssl openssl-devel \
gcc gcc-c++ make pcre-devel;useradd -M -s /sbin/nologin nginx #解决依赖
ADD php-7.1.10.tar.bz2 /usr/local/src/ #解压
WORKDIR /usr/local/src/php-7.1.10 #移动工作目录
RUN ./configure \
--prefix=/usr/local/php \
--with-mysql-sock=/usr/local/mysql/mysql.sock \
--with-mysqli \
--with-zlib \
--with-curl \
--with-gd \
--with-jpeg-dir \
--with-png-dir \
--with-freetype-dir \
--with-openssl \
--enable-fpm \
--enable-mbstring \
--enable-xml \
--enable-session \
--enable-ftp \
--enable-pdo \
--enable-tokenizer \
--enable-zip ; make -j 4 ; make install #编译安装
ENV PATH /usr/local/php/bin:/usr/local/php/sbin:$PATH #设置环境变量
ADD php.ini /usr/local/php/lib/ #添加文件
ADD php-fpm.conf /usr/local/php/etc/
ADD www.conf /usr/local/php/etc/php-fpm.d/
EXPOSE 9000 #端口
CMD /usr/local/php/sbin/php-fpm -F #开机自启
#编辑三个配置文件
vim php.ini
[PHP]
engine = On
short_open_tag = Off
precision = 14
output_buffering = 4096
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func =
serialize_precision = -1
disable_functions =
disable_classes =
zend.enable_gc = On
expose_php = On
max_execution_time = 30
max_input_time = 60
memory_limit = 128M
error_reporting = E_ALL
display_errors = On
display_startup_errors = On
log_errors = On
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = On
html_errors = On
variables_order = "GPCS"
request_order = "GP"
register_argc_argv = Off
auto_globals_jit = On
post_max_size = 8M
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
default_charset = "UTF-8"
doc_root =
user_dir =
enable_dl = Off
file_uploads = On
upload_max_filesize = 2M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
[CLI Server]
cli_server.color = On
[Date]
date.timezone = Asia/Shanghai
[filter]
[iconv]
[intl]
[sqlite3]
[Pcre]
[Pdo]
[Pdo_mysql]
pdo_mysql.cache_size = 2000
pdo_mysql.default_socket=
[Phar]
[mail function]
SMTP = localhost
smtp_port = 25
mail.add_x_header = On
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[Interbase]
ibase.allow_persistent = 1
ibase.max_persistent = -1
ibase.max_links = -1
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
ibase.dateformat = "%Y-%m-%d"
ibase.timeformat = "%H:%M:%S"
[MySQLi]
mysqli.max_persistent = -1
mysqli.allow_persistent = On
mysqli.max_links = -1
mysqli.cache_size = 2000
mysqli.default_port = 3306
mysqli.default_socket = /usr/local/mysql/mysql.sock
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mysqlnd]
mysqlnd.collect_statistics = On
mysqlnd.collect_memory_statistics = On
[OCI8]
[PostgreSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[bcmath]
bcmath.scale = 0
[browscap]
[Session]
session.save_handler = files
session.use_strict_mode = 0
session.use_cookies = 1
session.use_only_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor = 1000
session.gc_maxlifetime = 1440
session.referer_check =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.sid_length = 26
session.trans_sid_tags = "a=href,area=href,frame=src,form="
session.sid_bits_per_character = 5
[Assertion]
zend.assertions = 1
[COM]
[mbstring]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
soap.wsdl_cache_limit = 5
[sysvshm]
[ldap]
ldap.max_links = -1
[mcrypt]
[dba]
[opcache]
[curl]
[openssl]
vim php-fpm.conf
[global]
pid = run/php-fpm.pid
include=/usr/local/php/etc/php-fpm.d/*.conf
vim www.conf
[www]
user = nginx
group = nginx
listen = 172.17.0.4:9000
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
#构建php容器镜像
docker build -t php:lnmp .
#根据php镜像创建容器并启动
docker run -itd --name php --ip 172.17.0.4 -p 9000:9000 --volumes-from nginx --volumes-from mysql php:lnmp
#查看当前运行容器
三、测试
访问192.168.33.1/upload