《网络建设与运维》河北省 samba服务配置

绿叶松林

已于 2024-07-11 14:47:25 修改

阅读量142

点赞数 4

文章标签： linux 服务器运维

于 2024-07-11 14:32:25 首次发布

本文链接：https://blog.csdn.net/2301_79003812/article/details/140350889

版权

任务描述：请采用samba 服务，实现资源共享。

配置 linux3 为 samba 服务器,建立共享目录/sharesmb，共享名与目录名相同。

[root@linux3 ~]# yum install samba -y
[root@linux3 ~]# sudo mkdir -p /sharesmb
[root@linux2 ~]# chown root:admin /sharesmb
[root@linux2 ~]# chmod 2770 /sharesmb

新建用户user00-user03, 用户名和密码相同。user00 和user01 添加到 admin 组，user02 和 user03 添加到 hr 组。把用户 user00- user03 添加到samba 用户。

[root@linux3 ~]# vim 1.sh
for user in user00 user01 user02 user03; do
    sudo useradd $user
    echo "$user:$user" | sudo chpasswd
done
[root@linux3 ~]# chmod +x 1.sh
[root@linux3 ~]# ./1.sh
[root@linux3 ~]# sudo groupadd admin
[root@linux3 ~]# sudo groupadd hr

[root@linux3 ~]# sudo usermod -aG admin user00
[root@linux3 ~]# sudo usermod -aG admin user01
[root@linux3 ~]# sudo usermod -aG hr user02
[root@linux3 ~]# sudo usermod -aG hr user03

[root@linux3 ~]# vim 1.sh
groupadd admin  
for username in user{00..01}  
	do  
		# 使用'usermod'命令将'username'用户添加到'dev'组。'-g'选项表示要设置的组名。  
		useradd  $username
		usermod -aG admin $username
		# 输出"Pass-1234"，然后通过管道（'|'符号）将这个输出作为'passwd'命令的输入。  
		# '--stdin'选项表示密码将从标准输入获取，而不是从终端输入。  
		echo "$username:$username" | sudo chpasswd  
done
groupadd hr  
		
for username in user{02..03}  
	do   
		useradd  $username
		usermod -aG hr $username 
		echo "$username:$username" | sudo chpasswd  
done
[root@linux3 ~]# chmod +x 1.sh  #给予运行权限
[root@linux3 ~]# ./1.sh   #运行脚本			
[root@linux3 ~]# id user03
uid=1003(user03) gid=1003(user03) groups=1003(user03),1005(hr)
[root@linux3 ~]# id user01
uid=1001(user01) gid=1001(user01) groups=1001(user01),1004(admin)
[root@linux3 ~]# smbpasswd -a user00
New SMB password:
Retype new SMB password:
Added user user00.
Enabled user user00.			
[root@linux3 ~]# smbpasswd -a user01
[root@linux3 ~]# smbpasswd -a user02
[root@linux3 ~]# smbpasswd -a user03

admin 组用户对sharesmb共享有读写权限，hr 组对 sharesmb 共享有只读权限；用户对自己新建的文件有完全权限，对其他用户的文件只有读权限，且不能删除别人的文件。

[root@linux3 ~]# vim /etc/samba/smb.conf
[sharesmb]
        path = /sharesmb
        browseable = yes    #这个共享在网络上可以被其他计算机浏览
        writable = yes      #允许客户端写入这个共享
        valid list = @hr,@admin  #这限制了只有 hr 和 admin 这两个组的成员才能访问这个共享
        write list = @admin 		#admin 组的成员才能写入这个共享
        read list = @hr         #指定 hr 用户组的用户具有读权限
        read only = no          #是否只读
        force group = admin			#管理员
setfacl -Rdm g:admin:rwx /sharesmb     #admin读写执行权
setfacl -Rdm g:hr:rx /sharesmb         #hr读取执行权

在本机用smbclient 命令测试。

[root@linux3 ~]# smbclient //10.4.220.102/sharesmb -U user01
Password for [SAMBA\user01]:
Try "help" to get a list of possible commands.
smb: \> put 1.txt 
putting file 1.txt as \1.txt (0.0 kb/s) (average 0.0 kb/s)
smb: \> get 1.txt 2.txt
getting file \1.txt of size 0 as 2.txt (0.0 KiloBytes/sec) (average -nan KiloBytes/sec)
smb: \> exit
[root@linux3 ~]# smbclient //10.4.220.102/sharesmb -U user03
Password for [SAMBA\user03]:
Try "help" to get a list of possible commands.
smb: \> put 2.txt 
NT_STATUS_ACCESS_DENIED opening remote file \2.txt
smb: \> get 2.txt 5.txt
NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \2.txt
smb: \> ls
  .                                   D        0  Sun Jun 30 15:00:14 2024
  ..                                  D        0  Sun Jun 30 14:42:31 2024
  1.txt                               A        0  Sun Jun 30 15:00:14 2024

                13092864 blocks of size 1024. 11316848 blocks available
smb: \> get 1.txt 5.txt
getting file \1.txt of size 0 as 5.txt (0.0 KiloBytes/sec) (average -nan KiloBytes/sec)
[root@linux3 ~]# smbclient //10.4.220.102/sharesmb -U user00    #删除权限
Password for [SAMBA\user00]:
Try "help" to get a list of possible commands.
smb: \> ls
  .                                   D        0  Sun Jun 30 22:49:24 2024
  ..                                  D        0  Sun Jun 30 14:42:31 2024
  1.txt                               A        0  Sun Jun 30 22:49:19 2024
  2.txt                               A        0  Sun Jun 30 22:49:24 2024
smb: \> del 2.txt
smb: \> ls
  .                                   D        0  Sun Jun 30 22:50:10 2024
  ..                                  D        0  Sun Jun 30 14:42:31 2024
  1.txt                               A        0  Sun Jun 30 22:49:19 2024
[root@linux3 ~]# smbclient //10.4.220.102/sharesmb -U user03   删除别人的权限
Password for [SAMBA\user03]:
Try "help" to get a list of possible commands.
smb: \> del 5.txt 
NT_STATUS_ACCESS_DENIED deleting remote file \5.txt

安装客户端
[root@linux3 ~]# yum install -y samba-client
[root@linux3 ~]# smbclient //10.4.220.102/sharesmb -U user01   #遇到这个情况为服务器未启动smb
Password for [SAMBA\user01]:
do_connect: Connection to 10.4.220.102 failed (Error NT_STATUS_CONNECTION_REFUSED)
NT_STATUS_ACCESS_DENIED opening remote file \1.txt  
[root@linux3 ~]# systemctl restart smb.service                 #启动即可
[root@linux3 ~]# smbclient //10.4.220.102/sharesmb -U user01
Password for [SAMBA\user01]:
Try "help" to get a list of possible commands. 
smb: \> put 1.txt                  															#可能是权限没有设置，也可能是selinux没关
NT_STATUS_ACCESS_DENIED opening remote file \1.txt   
[root@linux2 ~]# setenforce 0																		#关闭即可
[root@linux2 ~]# smbclient //10.4.220.102/sharesmb -U user01
Password for [SAMBA\user01]:
Try "help" to get a list of possible commands.
smb: \> put 1.txt 
putting file 1.txt as \1.txt (0.0 kb/s) (average 0.0 kb/s)

在linux4上使用用户user00实现无需手动输入密码自动挂载linux3 的sharesmb 共享到/sharesmb，同时防止运行恶意脚本运，禁止运行.sh 文件，禁止在挂载命令中显示明文密码。

[root@linux4 ~]# sudo mkdir -p /sharesmb
[root@linux4 ~]# vim /etc/samba/user00.credentials
username=user00
password=user00
[root@linux4 ~]# chmod 600 /etc/samba/user00.credentials
[root@linux4 ~]# vim /etc/fstab
//10.4.220.102/sharesmb /sharesmb cifs credentials=/etc/samba/user00.credentials,iocharset=utf8,sec=ntlmv2,nosuid,nodev,noexec 0 0
[root@linux4 ~]# systemctl daemon-reload           #加载组件
[root@linux4 ~]# mount -a
mount: /sharesmb: bad option; for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount.<type> helper program.
#遇到这个情况是没有下载完依赖包，差组件cifs-utils 软件包
[root@linux4 ~]# sudo yum install cifs-utils

//10.4.220.102/sharesmb    # 远程共享路径
/sharesmb                 # 本地挂载点
cifs                      # 使用 CIFS 协议
credentials=/etc/samba/user00.credentials, # 认证信息文件路径
nodev,                    # 不解读设备文件
noexec                    # 不允许执行文件
0                         # dump 备份时不备份此文件系统
0                         # 启动时不检查此文件系统