Arduino示例代码讲解：Project 11 - Crystal Ball 水晶球

Project 11 - Crystal Ball 水晶球

/*
  Arduino Starter Kit example
 Project 11  - Crystal Ball

 This sketch is written to accompany Project 11 in the
 Arduino Starter Kit

 Parts required:
 220 ohm resistor
 10 kilohm resistor
 10 kilohm potentiometer
 16x2 LCD screen
 tilt switch


 Created 13 September 2012
 by Scott Fitzgerald

 http://arduino.cc/starterKit

 This example code is part of the public domain
 */

// include the library code:
#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

// set up a constant for the tilt switchPin
const int switchPin = 6;

// variable to hold the value of the switchPin
int switchState = 0;

// variable to hold previous value of the switchpin
int prevSwitchState = 0;

// a variable to choose which reply from the crystal ball
int reply;

void setup() {
   
  // set up the number of columns and rows on the LCD
  lcd.begin(16, 2);

  // set up the switch pin as an input
  pinMode(switchPin, INPUT);

  // Print a message to the LCD.
  lcd.print("Ask the");
  // set the cursor to column 0, line 1
  // line 1 is the second row, since counting begins with 0
  lcd.setCursor(0, 1);
  // print to the second line
  lcd.print("Crystal Ball!");
}

void loop() {
   
  // check the status of the switch
  switchState = digitalRead(switchPin);