VLAN实验报告

一、拓扑图及需求

二、需求分析

1、交换的配置----VLAN

2、实现设备的ip配置------路由器、pc等

三、配置过程

1、交换的配置----VLAN

示例：LSW1

[sw1]vlan batch 2 3

[sw1]int g 0/0/3

[sw1-GigabitEthernet0/0/3]port link-type access

[sw1-GigabitEthernet0/0/3]port discar v

[sw1-GigabitEthernet0/0/3]port default vlan 2

[sw1-GigabitEthernet0/0/4]port li ac

[sw1-GigabitEthernet0/0/4]po d v 3

[sw1]int g 0/0/2

[sw1-GigabitEthernet0/0/2]port trunk allow-pass vlan 2 3

[sw1-GigabitEthernet0/0/2]int g 0/0/1

[sw1-GigabitEthernet0/0/1]po t all v 2 3

2、实现设备的ip配置------路由器、pc等

[r1]dhcp enable

[r1]ip pool vlan2

[r1-ip-pool-vlan2]network 192.168.2.0 mask 24

[r1-ip-pool-vlan2]gateway-list 192.168.2.254
[r1-ip-pool-vlan2]dns-list 8.8.8.8

[r1]ip pool vlan3

[r1-ip-pool-vlan3]network 192.168.3.0 mask 24

[r1-ip-pool-vlan3]gateway-list 192.168.3.254

[r1-ip-pool-vlan3]dns 8.8.8.8

[r1-GigabitEthernet0/0/0.1]ip add 192.168.2.254 24

[r1-GigabitEthernet0/0/0.1]dot1q termination  vid 2

[r1-GigabitEthernet0/0/0.1]arp broadcast enable

[r1-GigabitEthernet0/0/0.1]dhcp select global

[r1]int GigabitEthernet 0/0/0.2
[r1-GigabitEthernet0/0/0.2]ip add 192.168.3.254 24

[r1-GigabitEthernet0/0/0.2]dot1q termination vid 3

[r1-GigabitEthernet0/0/0.2]arp broadcast enable

[r1-GigabitEthernet0/0/0.2]dhcp s g