NAT实验

一.实验要求

二.规划ip

三.实验步骤

1.配置ip

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip address 202.1.1.1 24

[ISP]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip address 202.1.1.2 24
[ISP-GigabitEthernet0/0/0]int g0/0/1
[ISP-GigabitEthernet0/0/1]ip address 203.1.1.1 24 

 2.R1上配置出口路由

[R1]ip route-static 0.0.0.0 0 202.1.1.2

3.配置NAT 

[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255

[R1-acl-basic-2000]int g0/0/1
[R1-GigabitEthernet0/0/1]nat outbound 2000

4.R1上进行端口映射

[R1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 80 ins
ide 192.168.1.4 80
Warning:The port 80 is well-known port. If you continue it may cause function fa
ilure.
Are you sure to continue?[Y/N]:y
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 8080 i
nside 192.168.1.5 80
[R1-GigabitEthernet0/0/1]