2023网络建设与运维（路由器部分Ⅱ）

RT2与AC1之间运行OSPFv2协议，进程1，nssa no-summary区域1；AC1发布loopback1地址路由、产品和营销路由，用prefix-list重发布loopback3。

ip prefix-list lo3 seq 5 permit 10.1.4.3/32                                                                                          

route-map lo3 permit 10                                                         

match ip address prefix-list lo3

router ospf 1

red static route-map lo3

SW3模拟办事处产品和营销接口配置为loopback，模拟接口up。SW3模拟办事处与FW2之间运行OSPFv2协议，进程2，区域2，SW3模拟办事处发布loopback2、产品和营销。SW3模拟办事处配置ipv6默认路由；FW2分别配置到SW3模拟办事处loopback2、产品和营销的ipv6明细静态路由，FW2重发布静态路由到OSPFv3协议

SW3:

vlan 110

sw int e 1/0/11

Vlan 120

Sw int e 1/0/12

int e 1/0/11

Loopback

int e 1/0/12

Loopback

router ospf 2

router-id 10.1.3.2

netw 10.1.3.2/32 a 2

netw 10.1.110.1/24 a 2

netw 10.1.120.1/24 a 2

Netw 10.1.255.46/30 a 2

!

ipv route ::/0 :: vlan1015

FW2

ip vr trust-vr

router ospf 2

router-id 10.1.8.2

network 10.1.8.2/32 a 2

network 10.1.255.45/30 a 2

!

ipv route 2001:10:1:3::/128 ethernet0/1

ipv route 2001:10:1:110::/64 ethernet0/1

ipv route 2001:10:1:120::/64 ethernet0/1

router ospf 1

red static

RT1、FW2之间OSPFv2和OSPFv3协议，进程2，区域2；RT1发布loopback4路由，向该区域通告type1默认路由；FW2发布loopback1路由，FW2禁止学习到集团和分公司的所有路由。RT1用prefix-list匹配FW2 loopback1路由、SW3模拟办事处loopback2和产品路由、RT1与FW2直连ipv4路由，将这些路由重发布到区域0。

FW2

ip vr trust-vr

ipv router ospf 2

interface l1

ipv ospf 2 area 2

interface ethernet0/2

ipv ospf 2 area 2

router ospf 2                                                                   

 router-id 10.1.5.4                                                             

 network 10.1.5.4 255.255.255.255 area 2                                        

 network 10.1.255.24 255.255.255.252 area 2                                     

 default-information originate always metric-type 1

!                                                                               

ip prefix-list zx seq 5 permit 10.1.8.1/32                                      

ip prefix-list zx seq 10 permit 10.1.3.2/32                                     

ip prefix-list zx seq 15 permit 10.1.110.0/24                                   

ip prefix-list zx seq 20 permit 10.1.255.24/30

!                                                                               

route-map zx 10 permit                                                          

 match ip address zx

!

router ospf 1

red static route-map zx

修改ospf cost为100，实现SW1分别与RT2、FW2之间ipv4和ipv6互访流量优先通过SW1_SW2_RT1链路转发，SW2访问Internet ipv4和ipv6流量优先通过SW2_SW1_FW1链路转发。

RT1

int g 0/3

ip ospf cost 100

FW2

Interfece e0/2

Ip ospf cost 100

本文档设计目的只用于教学，切勿使用教程中的技术

进行违法活动以及售卖，造成的后果与作者本人无关