给大家的福利
零基础入门
对于从来没有接触过网络安全的同学,我们帮你准备了详细的学习成长路线图。可以说是最科学最系统的学习路线,大家跟着这个大的方向学习准没问题。
同时每个成长路线对应的板块都有配套的视频提供:
因篇幅有限,仅展示部分资料
网上学习资料一大堆,但如果学到的知识不成体系,遇到问题时只是浅尝辄止,不再深入研究,那么很难做到真正的技术提升。
一个人可以走的很快,但一群人才能走的更远!不论你是正从事IT行业的老鸟或是对IT行业感兴趣的新人,都欢迎加入我们的的圈子(技术交流、学习资源、职场吐槽、大厂内推、面试辅导),让我们一起学习成长!
*这段代码是一个函数,用于在处理网络数据包时设置相关的流处理标记和流哈希值。
-
p->flags |= PKT\_WANTS\_FLOW;
:将数据包的标志中加入了PKT\_WANTS\_FLOW
标记。这个标记通常用于表示当前数据包需要进行流处理,即需要为该数据包创建或更新对应的流对象。 -
p->flow\_hash = FlowGetHash(p);
:调用FlowGetHash
函数来计算当前数据包的流哈希值,并将结果赋给数据包的flow\_hash
属性。流哈希值通常用于在流表中快速查找或定位对应的流对象。
总的来说,这段代码的作用是在处理网络数据包时,标记该数据包需要进行流处理,并计算并保存该数据包对应的流哈希值,以便后续创建或更新对应的流对象。
*/
void FlowSetupPacket(Packet *p)
{
p->flags |= PKT_WANTS_FLOW;
p->flow_hash = FlowGetHash§;
}
Flow结构体如下:
/**
* \brief Flow data structure.
*
* The flow is a global data structure that is created for new packets of a
* flow and then looked up for the following packets of a flow.
*
* Locking
*
* The flow is updated/used by multiple packets at the same time. This is why
* there is a flow-mutex. It’s a mutex and not a spinlock because some
* operations on the flow can be quite expensive, thus spinning would be
* too expensive.
*
* The flow “header” (addresses, ports, proto, recursion level) are static
* after the initialization and remain read-only throughout the entire live
* of a flow. This is why we can access those without protection of the lock.
*
Flow的结构体,用于表示流数据的结构。这个结构体的各个成员的含义:
这个结构体定义了用于表示网络数据流的各种属性和状态信息,包括地址、端口、协议类型、超时信息、线程信息、锁信息、协议特定数据指针等。
*/
typedef struct Flow_
{
/* flow “header”, used for hashing and flow lookup. Static after init,
* so safe to look at without lock */
FlowAddress src, dst; /*表示流的源地址和目的地址。*/
/* sp,dp:表示源端口和目的端口。*/
union {
Port sp; /**< tcp/udp source port */
struct {
uint8_t type; /**< icmp type */
uint8_t code; /**< icmp code */
} icmp_s;
struct {
uint32\_t spi; /\*\*< esp spi \*/
} esp;
};
union {
Port dp; /\*\*< tcp/udp destination port \*/
struct {
uint8\_t type; /\*\*< icmp type \*/
uint8\_t code; /\*\*< icmp code \*/
} icmp_d;
};
uint8\_t proto; /\*表示协议类型。\*/
uint8\_t recursion_level;/\*表示递归级别。 \*/
uint16\_t vlan_id[VLAN_MAX_LAYERS]; /\* 表示 VLAN ID 和 VLAN 索引。\*/
uint8\_t vlan_idx;
/\* track toserver/toclient flow timeout needs
ffr_ts、ffr_tc、ffr
用于跟踪流的超时需求。
*/
union {
struct {
uint8_t ffr_ts:4;
uint8_t ffr_tc:4;
};
uint8_t ffr;
};
/\*\* timestamp in seconds of the moment this flow will timeout
* according to the timeout policy. Does *not* take emergency
* mode into account.
timeout_at:表示流的超时时间戳。
*/
uint32_t timeout_at;
/\*\* Thread ID for the stream/detect portion of this flow
thread_id:用于存储流的线程 ID。
*/
FlowThreadId thread_id[2];
struct Flow\_ \*next; /\* (hash) list next 指向下一个流的指针。 \*/
/\*\* Incoming interface
livedev:表示流的输入接口。
*/
struct LiveDevice_ *livedev;
/\*\* flow hash - the flow hash before hash table size mod.
flow_hash:表示流的哈希值。
*/
uint32_t flow_hash;
/\*\* timeout policy value in seconds to add to the lastts.tv\_sec
* when a packet has been received.
timeout_policy:表示超时策略的数值。
*/
uint32_t timeout_policy;
/\* time stamp of last update (last packet). Set/updated under the
* flow and flow hash row locks, safe to read under either the
* flow lock or flow hash row lock.
lastts:表示流的最后更新时间戳。
*/
SCTime_t lastts;
/* flow_state:表示流的状态类型。*/
FlowStateType flow_state;
/\*\* flow tenant id, used to setup flow timeout and stream pseudo
* packets with the correct tenant id set
tenant_id:表示租户 ID。
*/
uint32_t tenant_id;
/\*
probing_parser_toserver_alproto_masks、probing_parser_toclient_alproto_masks:用于探测解析器的掩码。
*/
uint32_t probing_parser_toserver_alproto_masks;
uint32_t probing_parser_toclient_alproto_masks;
uint32\_t flags; /\*\*< generic flags flags:表示流的通用标志。\*/
uint16\_t file_flags; /\*\*< file tracking/extraction flags file\_flags:表示文件跟踪/提取标志。\*/
/\*\* destination port to be used in protocol detection. This is meant
* for use with STARTTLS and HTTP CONNECT detection
protodetect_dp:用于协议检测的目的端口。
*/
uint16_t protodetect_dp; /**< 0 if not used */
/\* Parent flow id for protocol like ftp
parent_id:表示协议的父流 ID。
*/
int64_t parent_id;
/*
r、m:用于流锁的读写锁或互斥锁。
*/
#ifdef FLOWLOCK_RWLOCK
SCRWLock r;
#elif defined FLOWLOCK_MUTEX
SCMutex m;
#else
#error Enable FLOWLOCK_RWLOCK or FLOWLOCK_MUTEX
#endif
/\*\* protocol specific data pointer, e.g. for TcpSession
protoctx:指向协议特定数据的指针。
*/
void *protoctx;
/\*\* mapping to Flow's protocol specific protocols for timeouts
and state and free functions.
protomap:用于超时和状态函数的协议映射。
*/
uint8_t protomap;
写在最后
在结束之际,我想重申的是,学习并非如攀登险峻高峰,而是如滴水穿石般的持久累积。尤其当我们步入工作岗位之后,持之以恒的学习变得愈发不易,如同在茫茫大海中独自划舟,稍有松懈便可能被巨浪吞噬。然而,对于我们程序员而言,学习是生存之本,是我们在激烈市场竞争中立于不败之地的关键。一旦停止学习,我们便如同逆水行舟,不进则退,终将被时代的洪流所淘汰。因此,不断汲取新知识,不仅是对自己的提升,更是对自己的一份珍贵投资。让我们不断磨砺自己,与时代共同进步,书写属于我们的辉煌篇章。
需要完整版PDF学习资源私我
网上学习资料一大堆,但如果学到的知识不成体系,遇到问题时只是浅尝辄止,不再深入研究,那么很难做到真正的技术提升。
一个人可以走的很快,但一群人才能走的更远!不论你是正从事IT行业的老鸟或是对IT行业感兴趣的新人,都欢迎加入我们的的圈子(技术交流、学习资源、职场吐槽、大厂内推、面试辅导),让我们一起学习成长!