配置单臂路由（一台交换机）

[G0/0/1连接路由];缺点：单点故障和带宽的影响

（配置子接口dot1q封装的单层VLAN ID：dotlq termination vid）

（允许子接口ARP广播功能：arp broadcast enable）

[SWA]vlan batch 10 20

[SWA-GigabitEthernet0/0/2]port link-type access

[SWA-GigabitEthernet0/0/2]port default vlan 10

[SWA-GigabitEthernet0/0/3]port link-type access

[SWA-GigabitEthernet0/0/3]port default vlan 20

[SWA-GigabitEthernet0/0/1]port link-type trunk

[SWA-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20

[RTA]interface GigabitEthernet0/0/1.1（是路由的接口，和交换机接口保持一致）

[RTA-GigabitEthernet0/0/1.1]dotlq termination vid 10

[RTA-GigabitEthernet0/0/1.1]ip address 192.168.10.254 24

[RTA-GigabitEthernet0/0/1.1]arp broadcast enable

[RTA]interface GigabitEthernet0/0/1.2

[RTA-GigabitEthernet0/0/1.2]dotlq termination vid 20

[RTA-GigabitEthernet0/0/1.2]ip address 192.168.20.254 24

[RTA-GigabitEthernet0/0/1.2]arp broadcast enable