codeforces 990D、Graph And Its Complement(思维)

                                                             D. Graph And Its Complement

time limit per test

2 seconds

memory limit per test

256 megabytes

input

standard input

output

standard output

Given three numbers n,a,bn,a,b. You need to find an adjacency matrix of such an undirected graph that the number of components in it is equal to aa, and the number of components in its complement is bb. The matrix must be symmetric, and all digits on the main diagonal must be zeroes.

In an undirected graph loops (edges from a vertex to itself) are not allowed. It can be at most one edge between a pair of vertices.

The adjacency matrix of an undirected graph is a square matrix of size nn consisting only of "0" and "1", where nn is the number of vertices of the graph and the ii-th row and the ii-th column correspond to the ii-th vertex of the graph. The cell (i,j)(i,j) of the adjacency matrix contains 11 if and only if the ii-th and jj-th vertices in the graph are connected by an edge.

A connected component is a set of vertices XX such that for every two vertices from this set there exists at least one path in the graph connecting this pair of vertices, but adding any other vertex to XX violates this rule.

The complement or inverse of a graph GG is a graph HH on the same vertices such that two distinct vertices of HH are adjacent if and only if they are not adjacent in GG.

Input

In a single line, three numbers are given n,a,b(1≤n≤1000,1≤a,b≤n)n,a,b(1≤n≤1000,1≤a,b≤n): is the number of vertexes of the graph, the required number of connectivity components in it, and the required amount of the connectivity component in it's complement.

Output

If there is no graph that satisfies these constraints on a single line, print "NO" (without quotes).

Otherwise, on the first line, print "YES"(without quotes). In each of the next nn lines, output nn digits such that jj-th digit of ii-th line must be 11 if and only if there is an edge between vertices ii and jj in GG (and 00 otherwise). Note that the matrix must be symmetric, and all digits on the main diagonal must be zeroes.

If there are several matrices that satisfy the conditions — output any of them.

Examples

input

Copy

3 1 2

output

Copy

YES
001
001
110

input

Copy

3 3 3

output

Copy

NO

 

一、原题地址

点我传送

 

二、大致题意

给出n,a,b。表示有n个城镇现在要构造一副图,使得原图连通块的数量为a。把原图上所有边去掉再补上原来图上没有的边(即补图)的连通块数量为b。

 

三、大致思路

  首先在a和b中一定会有一个数的值为1。证明很简单,对于一副图中的一个连通块 x ,对于这个连通块中的点,当这个点取补图的时候,它会与其他连通块的所有点连一条边,这个连通块 x 当中的其他点也是如此,那么其实就相当于把所有的点都汇在了一起变成一个连通块。

那么其实情况就不会很多了,要么a=1,要么b=1,要么a和b都等于1。

1、当b=1时,只需要考虑原本的图是怎么样的就行,那么只需要把前a-1个点独立出去,然后再把后面的点连通成一块就行。

2、当a=1时,情况其实和1是一样的,可以选择去构造补图,相当于所有操作全部取反就行。

3、a和b都等于1时,n=1肯定是可以的,n=2或者n=3都不行,但是n>=4时只需要把图构造成一条链,又可以了。

4、a和b都不等于1已经讨论过了不行。

 

四、代码

#include<iostream>
#include<cstdlib>
#include<cstdio>
#include<map>
#include<set>
#include<string>
#include<cstring>
#include<algorithm>
#include<queue>
#include<vector>
#include<functional>
using namespace std;
#define inf 0x3f3f3f3f
typedef long long LL;
int gcd(int a, int b) { return a == 0 ? b : gcd(b % a, a); }
LL GCD(LL a, LL b) { return a == 0 ? b : GCD(b % a, a); }

int n, a, b;
int mmp[1005][1005];
void printmap()
{
	for (int i = 1; i <= n; i++)
	{
		for (int j = 1; j <= n; j++)
		{
			if (i == j)printf("0");
			else printf("%d", mmp[i][j]);
		}
		printf("\n");
	}
}
int main()
{
	scanf("%d %d %d", &n, &a, &b);
	memset(mmp, 0, sizeof(mmp));
	if (a != 1 && b != 1)
	{
		printf("NO\n");
	}
	else if (a == 1 && b != 1)
	{
		for (int i = 1; i <= n; i++)
			for (int j = 1; j <= n; j++)
				mmp[i][j] = 1;
		for (int i = b; i <= n; i++)
			mmp[i][n] = mmp[n][i] = 0;
		printf("YES\n");
		printmap();
	}
	else if (b == 1 && a != 1)
	{
		for (int i = a; i <= n; i++)
			mmp[i][n] = mmp[n][i] = 1;
		printf("YES\n");
		printmap();
	}
	else if (a == 1 && b == 1)
	{
		if (n == 1)
		{
			printf("YES\n");
			printf("0\n");
		}
		else if (n == 2 || n == 3)
		{
			printf("NO\n");
		}
		else
		{
			printf("YES\n");
			for (int i = 1; i <= n - 1; i++)
				mmp[i][i + 1] = mmp[i + 1][i] = 1;
			printmap();
		}
	}
	getchar();
	getchar();

}

 

在使用Python来安装geopandas包时,由于geopandas依赖于几个其他的Python库(如GDAL, Fiona, Pyproj, Shapely等),因此安装过程可能需要一些额外的步骤。以下是一个基本的安装指南,适用于大多数用户: 使用pip安装 确保Python和pip已安装: 首先,确保你的计算机上已安装了Python和pip。pip是Python的包管理工具,用于安装和管理Python包。 安装依赖库: 由于geopandas依赖于GDAL, Fiona, Pyproj, Shapely等库,你可能需要先安装这些库。通常,你可以通过pip直接安装这些库,但有时候可能需要从其他源下载预编译的二进制包(wheel文件),特别是GDAL和Fiona,因为它们可能包含一些系统级的依赖。 bash pip install GDAL Fiona Pyproj Shapely 注意:在某些系统上,直接使用pip安装GDAL和Fiona可能会遇到问题,因为它们需要编译一些C/C++代码。如果遇到问题,你可以考虑使用conda(一个Python包、依赖和环境管理器)来安装这些库,或者从Unofficial Windows Binaries for Python Extension Packages这样的网站下载预编译的wheel文件。 安装geopandas: 在安装了所有依赖库之后,你可以使用pip来安装geopandas。 bash pip install geopandas 使用conda安装 如果你正在使用conda作为你的Python包管理器,那么安装geopandas和它的依赖可能会更简单一些。 创建一个新的conda环境(可选,但推荐): bash conda create -n geoenv python=3.x anaconda conda activate geoenv 其中3.x是你希望使用的Python版本。 安装geopandas: 使用conda-forge频道来安装geopandas,因为它提供了许多地理空间相关的包。 bash conda install -c conda-forge geopandas 这条命令会自动安装geopandas及其所有依赖。 注意事项 如果你在安装过程中遇到任何问题,比如编译错误或依赖问题,请检查你的Python版本和pip/conda的版本是否是最新的,或者尝试在不同的环境中安装。 某些库(如GDAL)可能需要额外的系统级依赖,如地理空间库(如PROJ和GEOS)。这些依赖可能需要单独安装,具体取决于你的操作系统。 如果你在Windows上遇到问题,并且pip安装失败,尝试从Unofficial Windows Binaries for Python Extension Packages网站下载相应的wheel文件,并使用pip进行安装。 脚本示例 虽然你的问题主要是关于如何安装geopandas,但如果你想要一个Python脚本来重命名文件夹下的文件,在原始名字前面加上字符串"geopandas",以下是一个简单的示例: python import os # 指定文件夹路径 folder_path = 'path/to/your/folder' # 遍历文件夹中的文件 for filename in os.listdir(folder_path): # 构造原始文件路径 old_file_path = os.path.join(folder_path, filename) # 构造新文件名 new_filename = 'geopandas_' + filename # 构造新文件路径 new_file_path = os.path.join(folder_path, new_filename) # 重命名文件 os.rename(old_file_path, new_file_path) print(f'Renamed "{filename}" to "{new_filename}"') 请确保将'path/to/your/folder'替换为你想要重命名文件的实际文件夹路径。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值