MPV播放器快捷键

 

MPV播放器快捷键

 

	# Location of user-defined bindings: ~/.config/mpv/input.conf
	# Lines starting with # are comments. Use SHARP to assign the # key.
	# Copy this file and uncomment and edit the bindings you want to change.
	#
	# List of commands and further details: DOCS/man/input.rst
	# List of special keys: --input-keylist
	# Keybindings testing mode: mpv --input-test --force-window --idle
	#
	# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
	#
	# Strings need to be quoted and escaped:
	# KEY show-text "This is a single backslash: \\ and a quote: \" !"
	#
	# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
	# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
	#
	# The default keybindings are hardcoded into the mpv binary.
	# You can disable them completely with: --no-input-default-bindings
	# Developer note:
	# On compilation, this file is baked into the mpv binary, and all lines are
	# uncommented (unless '#' is followed by a space) - thus this file defines the
	# default key bindings.
	# If this is enabled, treat all the following bindings as default.
	#default-bindings start
	#MBTN_LEFT ignore # don't do anything
	#MBTN_LEFT_DBL cycle fullscreen # toggle fullscreen on/off
	#MBTN_RIGHT cycle pause # toggle pause on/off
	# Mouse wheels, touchpad or other input devices that have axes
	# if the input devices supports precise scrolling it will also scale the
	# numeric value accordingly
	#WHEEL_UP seek 10
	#WHEEL_DOWN seek -10
	#WHEEL_LEFT add volume -2
	#WHEEL_RIGHT add volume 2
	## Seek units are in seconds, but note that these are limited by keyframes
	#RIGHT seek 5
	#LEFT seek -5
	#UP seek 60
	#DOWN seek -60
	# Do smaller, always exact (non-keyframe-limited), seeks with shift.
	# Don't show them on the OSD (no-osd).
	#Shift+RIGHT no-osd seek 1 exact
	#Shift+LEFT no-osd seek -1 exact
	#Shift+UP no-osd seek 5 exact
	#Shift+DOWN no-osd seek -5 exact
	# Skip to previous/next subtitle (subject to some restrictions; see manpage)
	#Ctrl+LEFT no-osd sub-seek -1
	#Ctrl+RIGHT no-osd sub-seek 1
	# Adjust timing to previous/next subtitle
	#Ctrl+Shift+LEFT sub-step -1
	#Ctrl+Shift+RIGHT sub-step 1
	# Move video rectangle
	#Alt+left add video-pan-x 0.1
	#Alt+right add video-pan-x -0.1
	#Alt+up add video-pan-y 0.1
	#Alt+down add video-pan-y -0.1
	# Zoom/unzoom video
	#Alt++ add video-zoom 0.1
	#Alt+- add video-zoom -0.1
	# Reset video zoom/pan settings
	#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0
	#PGUP add chapter 1 # skip to next chapter
	#PGDWN add chapter -1 # skip to previous chapter
	#Shift+PGUP seek 600
	#Shift+PGDWN seek -600
	#[ multiply speed 1/1.1 # scale playback speed
	#] multiply speed 1.1
	#{ multiply speed 0.5
	#} multiply speed 2.0
	#BS set speed 1.0 # reset speed to normal
	#Shift+BS revert-seek # undo previous (or marked) seek
	#Shift+Ctrl+BS revert-seek mark # mark position for revert-seek
	#q quit
	#Q quit-watch-later
	#q {encode} quit 4
	#ESC set fullscreen no
	#ESC {encode} quit 4
	#p cycle pause # toggle pause/playback mode
	#. frame-step # advance one frame and pause
	#, frame-back-step # go back by one frame and pause
	#SPACE cycle pause
	#> playlist-next # skip to next file
	#ENTER playlist-next # skip to next file
	#< playlist-prev # skip to previous file
	#O no-osd cycle-values osd-level 3 1 # cycle through OSD mode
	#o show-progress
	#P show-progress
	#i script-binding stats/display-stats
	#I script-binding stats/display-stats-toggle
	#z add sub-delay -0.1 # subtract 100 ms delay from subs
	#Z add sub-delay +0.1 # add
	#x add sub-delay +0.1 # same as previous binding (discouraged)
	#ctrl++ add audio-delay 0.100 # this changes audio/video sync
	#ctrl+- add audio-delay -0.100
	#9 add volume -2
	#/ add volume -2
	#0 add volume 2
	#* add volume 2
	#m cycle mute
	#1 add contrast -1
	#2 add contrast 1
	#3 add brightness -1
	#4 add brightness 1
	#5 add gamma -1
	#6 add gamma 1
	#7 add saturation -1
	#8 add saturation 1
	#Alt+0 set window-scale 0.5
	#Alt+1 set window-scale 1.0
	#Alt+2 set window-scale 2.0
	# toggle deinterlacer (automatically inserts or removes required filter)
	#d cycle deinterlace
	#r add sub-pos -1 # move subtitles up
	#R add sub-pos +1 # down
	#t add sub-pos +1 # same as previous binding (discouraged)
	#v cycle sub-visibility
	# stretch SSA/ASS subtitles with anamorphic videos to match historical
	#V cycle sub-ass-vsfilter-aspect-compat
	# switch between applying no style overrides to SSA/ASS subtitles, and
	# overriding them almost completely with the normal subtitle style
	#u cycle-values sub-ass-override "force" "no"
	#j cycle sub # cycle through subtitles
	#J cycle sub down # ...backwards
	#SHARP cycle audio # switch audio streams
	#_ cycle video
	#T cycle ontop # toggle video window ontop of other windows
	#f cycle fullscreen # toggle fullscreen
	#s async screenshot # take a screenshot
	#S async screenshot video # ...without subtitles
	#Ctrl+s async screenshot window # ...with subtitles and OSD, and scaled
	#Alt+s screenshot each-frame # automatically screenshot every frame
	#w add panscan -0.1 # zoom out with -panscan 0 -fs
	#W add panscan +0.1 # in
	#e add panscan +0.1 # same as previous binding (discouraged)
	# cycle video aspect ratios; "-1" is the container aspect
	#A cycle-values video-aspect "16:9" "4:3" "2.35:1" "-1"
	#POWER quit
	#PLAY cycle pause
	#PAUSE cycle pause
	#PLAYPAUSE cycle pause
	#STOP quit
	#FORWARD seek 60
	#REWIND seek -60
	#NEXT playlist-next
	#PREV playlist-prev
	#VOLUME_UP add volume 2
	#VOLUME_DOWN add volume -2
	#MUTE cycle mute
	#CLOSE_WIN quit
	#CLOSE_WIN {encode} quit 4
	#E cycle edition # next edition
	#l ab-loop # Set/clear A-B loop points
	#L cycle-values loop-file "inf" "no" # toggle infinite looping
	#ctrl+c quit 4
	#DEL script-binding osc/visibility # cycle OSC display
	#ctrl+h cycle-values hwdec "auto" "no" # cycle hardware decoding
	#F8 show_text ${playlist} # show playlist
	#F9 show_text ${track-list} # show list of audio/sub streams
	# Apple Remote section
	#AR_PLAY cycle pause
	#AR_PLAY_HOLD quit
	#AR_CENTER cycle pause
	#AR_CENTER_HOLD quit
	#AR_NEXT seek 10
	#AR_NEXT_HOLD seek 120
	#AR_PREV seek -10
	#AR_PREV_HOLD seek -120
	#AR_MENU show-progress
	#AR_MENU_HOLD cycle mute
	#AR_VUP add volume 2
	#AR_VUP_HOLD add chapter 1
	#AR_VDOWN add volume -2
	#AR_VDOWN_HOLD add chapter -1
	#
	# Legacy bindings (may or may not be removed in the future)
	#
	#! add chapter -1 # skip to previous chapter
	#@ add chapter 1 # next
	#
	# Not assigned by default
	# (not an exhaustive list of unbound commands)
	#
	# ? add sub-scale +0.1 # increase subtitle font size
	# ? add sub-scale -0.1 # decrease subtitle font size
	# ? cycle angle # switch DVD/Bluray angle
	# ? cycle sub-forced-only # toggle DVD forced subs
	# ? cycle program # cycle transport stream programs
	# ? stop # stop playback (quit or enter idle mode)