Tomcat 6.0 配置多个端口 一、Tomcat 安装后本身提供了一个server,端口配置默认是8080,对应目录为:..\Tomcat 6.0\webapps 二、Tomcat 6.0 配置多个端口,其实也就是给Tomcat增加几个server,并设置对应目录。下面以增加两个端口号为例 第一步、修改server.xml[..\Tomcat 6.0\conf] (1)Tomcat提供的如下: <Service name="Catalina"> <Connector port="8090" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> <Engine name="Catalina" defaultHost="localhost"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> </Engine> </Service> (2)比着上面的葫芦画下面的瓢、新增两个端口号,注意Service name、Engine name、appBase, 当然了,端口号别忘了修改,以免重复。 <Service name="Catalina1"> <Connector port="8091" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> <Engine name="Catalina1" defaultHost="localhost"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <Host name="localhost" appBase="webapps1" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> </Engine> </Service> <Service name="Catalina2"> <Connector port="8092" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> <Engine name="Catalina2" defaultHost="localhost"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <Host name="localhost" appBase="webapps2" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> </Engine> </Service> 第二步、创建相应的部署目录 ..\Tomcat 6.0\webapps1 ..\Tomcat 6.0\webapps2 同时可以将Tomcat 6.0\webapps下的有用的复制到新建的部署目录 第三步、创建配置文件目录和配置文件 ..\Tomcat 6.0\conf\Catalina1\localhost ..\Tomcat 6.0\conf\Catalina2\localhost host-manager.xml manager.xml 配置文件的配置可参照..\Tomcat 6.0\conf\Catalina\localhost下的,只需要修改一下对应目录即可 大概的配置步骤就是这些,现在可以把不同的war包放在不同的位置来访问了 以上配置方法同样适合Tomcat 5.5
Tomcat 6.0 配置多个端口
最新推荐文章于 2022-03-24 08:56:50 发布