BS EN 438-4装饰用薄板材压实层压制件的分类和规范

BS EN 438-4装饰用薄板材压实层压制件的分类和规范-测试标准

BS EN 438-4 High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) —Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater

装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压实层压制件的分类和规范

BS EN 438-4装饰用薄板材压实层压制件的分类和规范--测试范围

This standard specifies the requirements relating to: Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Non heat treated Remelting stock. For aerospace applications.

BS EN 438-4装饰用薄板材压实层压制件的分类和规范--检测项目及方法

EN 438-2 clause 4 Inspection requirements外观检查

EN 438-2 clause 5 Determination of thickness厚度

EN 438-2 clause 6 Determination of length and width长宽

EN 438-2 clause 7 Determination of edge straightness边直线度

EN 438-2 clause 8 Determination of edge squareness边直角度

EN 438-2 clause 9 Determination of flatness平整度

EN 438-2 clause 10 Resistance to surface wear表面耐磨性能

EN 438-2 clause 12 Resistance to immersion in boiling water 耐沸水浸泡

EN 438-2 clause 14 Resistance to water vapour耐水蒸气渗透

EN 438-2 clause 16 Resistance to dry heat 耐高温干热(160°C)

EN 438-2 clause 17 Dimensional stability at elevated temperature高温尺寸稳定性

EN 438-2 Clause 18 Resistance to wet heat(100°C)耐湿热

EN 438-2 clause 21 Resistance to impact by largediameter ball耐落球(大直径)冲击

EN 438-2 clause 24 Resistance to crazing 耐龟裂

EN 438-2 clause 25 Resistance to scratching耐刮擦

EN 438-2 clause 26 Resistance to staining耐污染

EN 438-2 Clause 27 Light fastness (xenon arc)耐光性能

EN ISO 178 Flexural modulus /Flexural Strenth  弯曲模量/弯曲强度

EN ISO 1183-1 Density密度

EN 13501-1 Reaction to fire防火性能

EN 61340-4-1 Electrostatic properties电学性能

EN 438-2 Clause 30 Microscratch resistance耐微裂痕

出自GF2022