EN 54-25: 火灾探测和火灾报警系统语音报警系统的组件-无线电链路组件—CE认证

使用无线电链路的组件CE认证（欧盟强制认证）－简介

在欧盟市场“CE”标志属强制性认证标志，以表明产品符合欧盟《技术协调与标准化新方法》指令的基本要求。这是欧盟法律对产品提出的一种强制性要求。

在使用无线电链路的组件加贴CE标志不但可以证明其产品符合建筑产品指令（CPR 305/2011/EU）及其相关标准（欧洲协调标准EN 54-25）规定的安全，环保，卫生和消费者保护。而且可以合理规避贸易技术壁垒，在欧洲市场自由销售并打开其他国际市场。

注：欧盟建筑法规CPR（Construction Product Regulation） 305/2011/EU 全面取代欧盟建筑产品指令CPD(Construction Product Directive) 106/89/EEC, 并且从2013年7月1日起强制执行

使用无线电链路的组件CE认证 –EN 54-25– 需要符合的产品指令和协调标准

A．产品指令：建筑产品法规CPR(Construction Product Regulation) 305/2011/EU

B．欧洲协调标准：

EN 54-25: Fire detection and fire alarm systems - Part 25: Components using radio links；

EN 54-25: 火灾探测和火灾报警系统-第25部分：使用无线电链路的组件；

使用无线电链路的组件CE认证 –EN 54-25– 涉及的产品范围

This European Standard specifies requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate. It also provides requirements for the evaluation of conformity of the components to the requirements of this European Standard. Where components work together and this requires knowledge of the system design, this document also specifies requirements on the system. When the fire detection and fire alarm systems (FDAS) use wired and RF links, the relevant parts of EN 54 apply together with this document. Requirements relevant to wire links are superseded or modified by those included in this European Standard. This document does not restrict: -- the intended use of radio spectrum, e.g. frequency, power output of devices; -- the allowed maximum number of the components using RF links within the FDAS or one transmission path and/or RF link; -- the allowed maximum number of the components affected by loss of one transmission path and/or RF link. These requirements relate to national regulations and can vary from member state to member state. This European Standard specifies requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate. It also provides requirements for the evaluation of conformity of the components to the requirements of this European Standard. Where components work together and this requires knowledge of the system design, this document also specifies requirements on the system. When the fire detection and fire alarm systems (FDAS) use wired and RF links, the relevant parts of EN 54 apply together with this document. Requirements relevant to wire links are superseded or modified by those included in this European Standard. This document does not restrict: -- the intended use of radio spectrum, e.g. frequency, power output of devices; -- the allowed maximum number of the components using RF links within the FDAS or one transmission path and/or RF link; -- the allowed maximum number of the components affected by loss of one transmission path and/or RF link. These requirements relate to national regulations and can vary from member state to member state.

本欧洲标准规定了安装在建筑物内部和周围使用射频链路(RF链路)进行通信的火灾报警系统中使用的组件的要求、测试方法和性能标准。它还提供了评估组件是否符合本欧洲标准要求的要求。当组件一起工作时，这需要系统设计的知识，该文档还指定了系统的需求。当火灾探测和火灾报警系统(FDAS)使用有线和射频链路时，EN 54的相关部分与本文件一起适用。与电线连接相关的要求被本欧洲标准中包含的要求所取代或修改。本文件不限制:——无线电频谱的预期用途，如频率、设备的功率输出;-允许使用FDAS内RF链路或一个传输路径和/或RF链路的组件的最大数量;—受一个传输路径和/或射频链路损失影响的组件的允许最大数量。这些要求与国家法规有关，并可能因成员国而异。

使用无线电链路的组件CE认证－EN 54-25–认证流程

1、确定需要认证的产品类型，提交申请

2、确定欧洲产品指令，扬声器需符合新的欧盟建筑产品法规CPR 305/2011/EU

3、确定欧洲协调标准，扬声器需符合协调标准EN 54-25

4、根据CPR指令和协调标准EN 54-25进行测试评估

5、获得由欧盟公告机构颁发的测试报告和证书

6、发放产品性能声明(Declaration of Performance)

7、在产品包装上加贴带公告机构编码的CE标志

8、在欧洲市场自由销售

中科易朔

info@casfire.cn

出自JJ2024