本文详细解释了ScrollView和ListView在测量子布局时遇到的显示不全问题，重点在于MeasureSpec.UNSPECIFIED的处理以及如何通过修改ListView的高度MeasureSpec来确保完整显示所有项目。
当我们在使用到ScrollView和ListView的时候可能会出现显示不全的问题。那我们可以进行以下分析
ScrollView在测量子布局的时候会用UNSPECIFIED。通过源码观察，
在ScrollView的onMeasure方法中
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
if (!mFillViewport) {
return;
}
final int heightMode = MeasureSpec.getMode(heightMeasureSpec);
if (heightMode == MeasureSpec.UNSPECIFIED) {
return;
}
if (getChildCount() > 0) {
final View child = getChildAt(0);
final int widthPadding;
final int heightPadding;
final int targetSdkVersion = getContext().getApplicationInfo().targetSdkVersion;
final FrameLayout.LayoutParams lp = (LayoutParams) child.getLayoutParams();
if (targetSdkVersion >= VERSION_CODES.M) {
widthPadding = mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin;
heightPadding = mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin;
} else {
widthPadding = mPaddingLeft + mPaddingRight;
heightPadding = mPaddingTop + mPaddingBottom;
}
final int desiredHeight = getMeasuredHeight() - heightPadding;
if (child.getMeasuredHeight() < desiredHeight) {
final int childWidthMeasureSpec = getChildMeasureSpec(
widthMeasureSpec, widthPadding, lp.width);
final int childHeightMeasureSpec = MeasureSpec.makeMeasureSpec(
desiredHeight, MeasureSpec.EXACTLY);
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}
}
}
点击super.onMeasure()方法可以观察到进入了FrameLayout中
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
int count = getChildCount();
final boolean measureMatchParentChildren =
MeasureSpec.getMode(widthMeasureSpec) != MeasureSpec.EXACTLY ||
MeasureSpec.getMode(heightMeasureSpec) != MeasureSpec.EXACTLY;
mMatchParentChildren.clear();
int maxHeight = 0;
int maxWidth = 0;
int childState = 0;
for (int i = 0; i < count; i++) {
final View child = getChildAt(i);
if (mMeasureAllChildren || child.getVisibility() != GONE) {
measureChildWithMargins(child, widthMeasureSpec, 0, heightMeasureSpec, 0);
final LayoutParams lp = (LayoutParams) child.getLayoutParams();
maxWidth = Math.max(maxWidth,
child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin);
maxHeight = Math.max(maxHeight,
child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin);
childState = combineMeasuredStates(childState, child.getMeasuredState());
if (measureMatchParentChildren) {
if (lp.width == LayoutParams.MATCH_PARENT ||
lp.height == LayoutParams.MATCH_PARENT) {
mMatchParentChildren.add(child);
}
}
}
}
// Account for padding too
maxWidth += getPaddingLeftWithForeground() + getPaddingRightWithForeground();
maxHeight += getPaddingTopWithForeground() + getPaddingBottomWithForeground();
// Check against our minimum height and width
maxHeight = Math.max(maxHeight, getSuggestedMinimumHeight());
maxWidth = Math.max(maxWidth, getSuggestedMinimumWidth());
// Check against our foreground's minimum height and width
final Drawable drawable = getForeground();
if (drawable != null) {
maxHeight = Math.max(maxHeight, drawable.getMinimumHeight());
maxWidth = Math.max(maxWidth, drawable.getMinimumWidth());
}
setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState),
resolveSizeAndState(maxHeight, heightMeasureSpec,
childState << MEASURED_HEIGHT_STATE_SHIFT));
count = mMatchParentChildren.size();
if (count > 1) {
for (int i = 0; i < count; i++) {
final View child = mMatchParentChildren.get(i);
final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
final int childWidthMeasureSpec;
if (lp.width == LayoutParams.MATCH_PARENT) {
final int width = Math.max(0, getMeasuredWidth()
- getPaddingLeftWithForeground() - getPaddingRightWithForeground()
- lp.leftMargin - lp.rightMargin);
childWidthMeasureSpec = MeasureSpec.makeMeasureSpec(
width, MeasureSpec.EXACTLY);
} else {
childWidthMeasureSpec = getChildMeasureSpec(widthMeasureSpec,
getPaddingLeftWithForeground() + getPaddingRightWithForeground() +
lp.leftMargin + lp.rightMargin,
lp.width);
}
final int childHeightMeasureSpec;
if (lp.height == LayoutParams.MATCH_PARENT) {
final int height = Math.max(0, getMeasuredHeight()
- getPaddingTopWithForeground() - getPaddingBottomWithForeground()
- lp.topMargin - lp.bottomMargin);
childHeightMeasureSpec = MeasureSpec.makeMeasureSpec(
height, MeasureSpec.EXACTLY);
} else {
childHeightMeasureSpec = getChildMeasureSpec(heightMeasureSpec,
getPaddingTopWithForeground() + getPaddingBottomWithForeground() +
lp.topMargin + lp.bottomMargin,
lp.height);
}
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}
}
}
里面有个measureChildWithMargins方法
protected void measureChildWithMargins(View child,
int parentWidthMeasureSpec, int widthUsed,
int parentHeightMeasureSpec, int heightUsed) {
final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin
+ widthUsed, lp.width);
final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin
+ heightUsed, lp.height);
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}
这个时候发现ScrollView有重写这个方法
@Override
protected void measureChildWithMargins(View child, int parentWidthMeasureSpec, int widthUsed,
int parentHeightMeasureSpec, int heightUsed) {
final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin
+ widthUsed, lp.width);
final int usedTotal = mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin +
heightUsed;
final int childHeightMeasureSpec = MeasureSpec.makeSafeMeasureSpec(
Math.max(0, MeasureSpec.getSize(parentHeightMeasureSpec) - usedTotal),
MeasureSpec.UNSPECIFIED);
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}
其中childHeightMeasureSpec的模式是MeasureSpec.UNSPECIFIED。这个表示尽可能的大，很少能用到。
而我们的ListView也会调用onMeaure方法
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
// Sets up mListPadding
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
final int widthMode = MeasureSpec.getMode(widthMeasureSpec);
final int heightMode = MeasureSpec.getMode(heightMeasureSpec);
int widthSize = MeasureSpec.getSize(widthMeasureSpec);
int heightSize = MeasureSpec.getSize(heightMeasureSpec);
int childWidth = 0;
int childHeight = 0;
int childState = 0;
mItemCount = mAdapter == null ? 0 : mAdapter.getCount();
if (mItemCount > 0 && (widthMode == MeasureSpec.UNSPECIFIED
|| heightMode == MeasureSpec.UNSPECIFIED)) {
final View child = obtainView(0, mIsScrap);
// Lay out child directly against the parent measure spec so that
// we can obtain exected minimum width and height.
measureScrapChild(child, 0, widthMeasureSpec, heightSize);
childWidth = child.getMeasuredWidth();
childHeight = child.getMeasuredHeight();
childState = combineMeasuredStates(childState, child.getMeasuredState());
if (recycleOnMeasure() && mRecycler.shouldRecycleViewType(
((LayoutParams) child.getLayoutParams()).viewType)) {
mRecycler.addScrapView(child, 0);
}
}
if (widthMode == MeasureSpec.UNSPECIFIED) {
widthSize = mListPadding.left + mListPadding.right + childWidth +
getVerticalScrollbarWidth();
} else {
widthSize |= (childState & MEASURED_STATE_MASK);
}
if (heightMode == MeasureSpec.UNSPECIFIED) {
heightSize = mListPadding.top + mListPadding.bottom + childHeight +
getVerticalFadingEdgeLength() * 2;
}
if (heightMode == MeasureSpec.AT_MOST) {
// TODO: after first layout we should maybe start at the first visible position, not 0
heightSize = measureHeightOfChildren(widthMeasureSpec, 0, NO_POSITION, heightSize, -1);
}
setMeasuredDimension(widthSize, heightSize);
mWidthMeasureSpec = widthMeasureSpec;
}
其中的heightMeasureSpec也就是我们在ScrollView中child.measure(childWidthMeasureSpec, childHeightMeasureSpec);在传递过来的。所以也是模式为MeasureSpec.UNSPECIFIED。而当heightMode == MeasureSpec.UNSPECIFIED时会调用
if (heightMode == MeasureSpec.UNSPECIFIED) {
heightSize = mListPadding.top + mListPadding.bottom + childHeight +
getVerticalFadingEdgeLength() * 2;
}
这样在heightSize = mListPadding.top + mListPadding.bottom + childHeight +getVerticalFadingEdgeLength() * 2只是加了一个childHeight 所以展示的只有一个item的大小。
所以要解决这个问题应该让listView进入heightMode == MeasureSpec.AT_MOST里。
public class MyListView extends ListView
{
public MyListView(Context context) {
super(context);
}
public MyListView(Context context, AttributeSet attrs) {
super(context, attrs);
}
public MyListView(Context context, AttributeSet attrs, int defStyleAttr) {
super(context, attrs, defStyleAttr);
}
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
//解决显示不全的问题
heightMeasureSpec=MeasureSpec.makeMeasureSpec(Integer.MAX_VALUE>>2,MeasureSpec.AT_MOST);
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
}
}
网上有的博客换成MyListView这么做就实现了，那么为什么呢？
首先当我们的模式为AT_MOST
if (heightMode == MeasureSpec.AT_MOST) {
// TODO: after first layout we should maybe start at the first visible position, not 0
heightSize = measureHeightOfChildren(widthMeasureSpec, 0, NO_POSITION, heightSize, -1);
}
调用ListView的measureHeightOfChildren
@UnsupportedAppUsage(maxTargetSdk = Build.VERSION_CODES.P, trackingBug = 115609023)
final int measureHeightOfChildren(int widthMeasureSpec, int startPosition, int endPosition,
int maxHeight, int disallowPartialChildPosition) {
final ListAdapter adapter = mAdapter;
if (adapter == null) {
return mListPadding.top + mListPadding.bottom;
}
// Include the padding of the list
int returnedHeight = mListPadding.top + mListPadding.bottom;
final int dividerHeight = mDividerHeight;
// The previous height value that was less than maxHeight and contained
// no partial children
int prevHeightWithoutPartialChild = 0;
int i;
View child;
// mItemCount - 1 since endPosition parameter is inclusive
endPosition = (endPosition == NO_POSITION) ? adapter.getCount() - 1 : endPosition;
final AbsListView.RecycleBin recycleBin = mRecycler;
final boolean recyle = recycleOnMeasure();
final boolean[] isScrap = mIsScrap;
for (i = startPosition; i <= endPosition; ++i) {
child = obtainView(i, isScrap);
measureScrapChild(child, i, widthMeasureSpec, maxHeight);
if (i > 0) {
// Count the divider for all but one child
returnedHeight += dividerHeight;
}
// Recycle the view before we possibly return from the method
if (recyle && recycleBin.shouldRecycleViewType(
((LayoutParams) child.getLayoutParams()).viewType)) {
recycleBin.addScrapView(child, -1);
}
returnedHeight += child.getMeasuredHeight();
if (returnedHeight >= maxHeight) {
// We went over, figure out which height to return. If returnedHeight > maxHeight,
// then the i'th position did not fit completely.
return (disallowPartialChildPosition >= 0) // Disallowing is enabled (> -1)
&& (i > disallowPartialChildPosition) // We've past the min pos
&& (prevHeightWithoutPartialChild > 0) // We have a prev height
&& (returnedHeight != maxHeight) // i'th child did not fit completely
? prevHeightWithoutPartialChild
: maxHeight;
}
if ((disallowPartialChildPosition >= 0) && (i >= disallowPartialChildPosition)) {
prevHeightWithoutPartialChild = returnedHeight;
}
}
// At this point, we went through the range of children, and they each
// completely fit, so return the returnedHeight
return returnedHeight;
}
因为returnedHeight一直在累加，这样我们让maxHeight为最大值，这样他就不会进入if (returnedHeight >= maxHeight) ，而是返回returnedHeight。
onMeasure方法中的widthMeasureSpec和heightMeasureSpec会包含两个信息，第一个信息是模式：2位，第二个信息是值：30位。一共32位
而这里为什么Integer.MAX_VALUE 要右移两位
public static int makeMeasureSpec(@IntRange(from = 0, to = (1 << MeasureSpec.MODE_SHIFT) - 1) int size,
@MeasureSpecMode int mode) {
if (sUseBrokenMakeMeasureSpec) {
return size + mode;
} else {
return (size & ~MODE_MASK) | (mode & MODE_MASK);
}
}
因为Integer.MAX_VALUE右移两位等于一个30位的值，这样执行makeMeasureSpec就可以构建成一个32位的值。这样去替换ListView的heightMeasureSpec即可。
/**
* A constant holding the maximum value an {@code int} can
* have, 2<sup>31</sup>-1.
*/
@Native public static final int MAX_VALUE = 0x7fffffff;
1279
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
