实验设备
Cisco2811
AIM-CUE
安装准备工作
A:下载CUE升级软件包
从Cisco Download Center 下载相应的CUE软件包(需要CCO帐号):
Support - Cisco Support and Downloads – Documentation, Tools, Cases - Cisco
主软件包
cue-vm-k9.nm-aim.7.0.5.zip
语言包
cue-vm-en_US-langpack.nm-aim.7.0.5.prt1
License 包
cue-vm-license_50mbx_cme_7.0.5.pkg
B:安装文件准备
解压缩主软件包
将cue-installer.nm-aim.7.0.5 拷贝到TFTP Server 上的TFTP根目录下
将其他所有其它文件拷贝到FTP Server上,比如FTP根目录下
1.配置CUE的IP address,建立CUE和CME的IP通讯连接
interface service-engine 0/1
ip unnumbered FastEthernet 0/0
service-module ip address 192.168.1.253 255.255.255.0
service-module ip default-gateway 192.168.1.254
no shutdown
2.配置到service-module(CUE)的路由:
ip route 192.168.1.253 255.255.255.255 service-engine 0/1
3.建立和CUE之间的会话
service-module service-engine 0/1 session
等等提示输入***时,输入***,进入boot helper模式
Please enter '***' to change boot configuration: ***
4. 配置boot-loader参数:
ServicesEngine boot-loader> config
IP Address [192.168.2.10] >192.168.1.253
Subnet mask [255.255.255.0] > <enter>
TFTP server [192.168.2.10] >192.168.1.250
Gateway [10.229.77.1] >192.168.1.254
Default Helper-file [cue-installer.3.1.2] >cue-installer.nm-aim.7.0.5
Ethernet interface [internal] > <enter>
Default Boot [disk] ><enter>
Default bootloader [primary|secondary] [secondary] >primary
Updating flash with bootloader configuration
5. 使用boot-helper模式重启系统:
ServicesEngine boot-loader>boot helper
......
6. 开始安装软件
Please select from the following
1 Install software
2 Reload module
3 Disk cleanup
(Type '?' at any time for help)
Choice: Choice: 1
Package name: cue-vm-k9.nm-aim.7.0.5.pkg
Server url: ftp://192.168.1.250/
Username: cisco
Password: cisco123
......
WARNING:: Software installation will clear disk contents
Continue [n]? y
......
6. 选择要安装的语言包
输入所列可选语言前面的编号选择要安装的语言包,输入x 结束选择
选择3,加载英文......
7. 初始化配置
Do you wish to start configuration now (y,n)? y
Are you sure (y,n)? y
......
Would you like to restore the saved configuration? (y,n) n
......
(注:如果想保留原有配置,输入y)
Enter Hostname:CUE
(my-hostname, or enter to use se-192-168-2-10): <enter>
Enter Domain Name
(mydomain.com, or enter to use localdomain): <enter>
Using localdomain as default
......
Would you like to use DNS (y,n)?y
Enter IP Address of the Primary DNS Server
(IP address): 8.8.8.8
Found server 8.8.8.8
Enter IP Address of the Secondary DNS Server (other than Primary)
(IP address, or enter to bypass): <enter>
Enter Fully Qualified Domain Name(FQDN: e.g. myhost.mydomain.com)
or IP address of the Primary NTP server
(FQDN or IP address, or enter for 192.168.1.1): 192.168.1.1
Found server 192.168.1.1
Enter Fully Qualified Domain Name(FQDN: e.g. myhost.mydomain.com)
or IP address of the Secondary NTP Server
(FQDN or IP address, or enter to bypass): <enter>
输入所列大陆/洋前面的编号选择所在大陆/洋
输入所列国家前面的编号选择所在国家
输入所列时区前面的编号选择所在时区
(Summary of selections)
Is the above information OK?
1) Yes
2) No
#? 1
......
8. 创建管理员帐户
Enter administrator user ID:
(user ID): administrator
Enter password for admin:
(password): ccievoice
Confirm password for admin by reentering it:
(password): ccievoice
9. 安装成功,恭喜!!!
SYSTEM ONLINE
CUE>