测试容器网络连通性-CSDN博客

本文链接：https://blog.csdn.net/DDFFR/article/details/76153831

本文介绍了如何检查两个 Docker 容器之间的网络连接。通过进入每个容器并查看 IP 地址，然后在另一个容器内使用 ping 命令尝试连接，确认了它们之间的网络通信是正常的。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

进入容器查看ip

root@f2b5cdfdc5ed:/private-geth# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
273: eth0@if274: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default 
    link/ether 02:42:ac:12:00:04 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 172.18.0.4/16 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:acff:fe12:4/64 scope link 
       valid_lft forever preferred_lft forever

在另外一个容器内ping 一下

root@03fb89fa98ec:/# ping 172.18.0.4
PING 172.18.0.4 (172.18.0.4) 56(84) bytes of data.
64 bytes from 172.18.0.4: icmp_seq=1 ttl=64 time=0.166 ms
64 bytes from 172.18.0.4: icmp_seq=2 ttl=64 time=0.137 ms
64 bytes from 172.18.0.4: icmp_seq=3 ttl=64 time=0.103 ms
64 bytes from 172.18.0.4: icmp_seq=4 ttl=64 time=0.109 ms
64 bytes from 172.18.0.4: icmp_seq=5 ttl=64 time=0.109 ms
64 bytes from 172.18.0.4: icmp_seq=6 ttl=64 time=0.135 ms
64 bytes from 172.18.0.4: icmp_seq=7 ttl=64 time=0.123 ms
64 bytes from 172.18.0.4: icmp_seq=8 ttl=64 time=0.109 ms
64 bytes from 172.18.0.4: icmp_seq=9 ttl=64 time=0.110 ms
^C