Redis默认redis.conf

Redis默认redis.conf

# Redis configuration file example.
 
#
 
# Note that in order to read the configuration file, Redis must be
 
# started with the file path as first argument:
 
#
 
# ./redis-server /path/to/redis.conf
 
 
 
# Note on units: when memory size is needed, it is possible to specify
 
# it in the usual form of 1k 5GB 4M and so forth:
 
#
 
# 1k => 1000 bytes
 
# 1kb => 1024 bytes
 
# 1m => 1000000 bytes
 
# 1mb => 1024*1024 bytes
 
# 1g => 1000000000 bytes
 
# 1gb => 1024*1024*1024 bytes
 
#
 
# units are case insensitive so 1GB 1Gb 1gB are all the same.
 
 
 
################################## INCLUDES ###################################
 
 
 
# Include one or more other config files here.  This is useful if you
 
# have a standard template that goes to all Redis servers but also need
 
# to customize a few per-server settings.  Include files can include
 
# other files, so use this wisely.
 
#
 
# Notice option "include" won't be rewritten by command "CONFIG REWRITE"
 
# from admin or Redis Sentinel. Since Redis always uses the last processed
 
# line as value of a configuration directive, you'd better put includes
 
# at the beginning of this file to avoid overwriting config change at runtime.
 
#
 
# If instead you are interested in using includes to override configuration
 
# options, it is better to use include as the last line.
 
#
 
# include /path/to/local.conf
 
# include /path/to/other.conf
 
 
 
################################## MODULES #####################################
 
 
 
# Load modules at startup. If the server is not able to load modules
 
# it will abort. It is possible to use multiple loadmodule directives.
 
#
 
# loadmodule /path/to/my_module.so
 
# loadmodule /path/to/other_module.so
 
 
 
################################## NETWORK #####################################
 
 
 
# By default, if no "bind" configuration directive is specified, Redis listens
 
# for connections from all the network interfaces available on the server.
 
# It is possible to listen to just one or multiple selected interfaces using
 
# the "bind" configuration directive, followed by one or more IP addresses.
 
#
 
# Examples:
 
#
 
# bind 192.168.1.100 10.0.0.1
 
# bind 127.0.0.1 ::1
 
#
 
# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
 
# internet, binding to all the interfaces is dangerous and will expose the
 
# instance to everybody on the internet. So by default we uncomment the
 
# following bind directive, that will force Redis to listen only into
 
# the IPv4 loopback interface address (this means Redis will be able to
 
# accept connections only from clients running into the same computer it
 
# is running).
 
#
 
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 
# JUST COMMENT THE FOLLOWING LINE.
 
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
#bind 127.0.0.1
 
 
 
# Protected mode is a layer of security protection, in order to avoid that
 
# Redis instances left open on the internet are accessed and exploited.
 
#
 
# When protected mode is on and if:
 
#
 
# 1) The server is not binding explicitly to a set of addresses using the
 
#    "bind" directive.
 
# 2) No password is configured.
 
#
 
# The server only accepts connections from clients connecting from the
 
# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain
 
# sockets.
 
#
 
# By default protected mode is enabled. You should disable it only if
 
# you are sure you want clients from other hosts to connect to Redis
 
# even if no authentication is configured, nor a specific set of interfaces
 
# are explicitly listed using the "bind" directive.
 
protected-mode no
 
 
 
# Accept connections on the specified port, default is 6379 (IANA #815344).
 
# If port 0 is specified Redis will not listen on a TCP socket.
 
port 6379
 
 
 
# TCP listen() backlog.
 
#
 
# In high requests-per-second environments you need an high backlog in order
 
# to avoid slow clients connections issues. Note that the Linux kernel
 
# will silently truncate it to the value of /proc/sys/net/core/somaxconn so
 
# make sure to raise both the value of somaxconn and tcp_max_syn_backlog
 
# in order to get the desired effect.
 
tcp-backlog 511
 
 
 
# Unix socket.
 
#
 
# Specify the path for the Unix socket that will be used to listen for
 
# incoming connections. There is no default, so Redis will not listen
 
# on a unix socket when not specified.
 
#
 
# unixsocket /tmp/redis.sock
 
# unixsocketperm 700
 
 
 
# Close the connection after a client is idle for N seconds (0 to disable)
 
timeout 0
 
 
 
# TCP keepalive.
 
#
 
# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence
 
# of communication. This is useful for two reasons:
 
#
 
# 1) Detect dead peers.
 
# 2) Take the connection alive from the point of view of network
 
#    equipment in the middle.
 
#
 
# On Linux, the specified value (in seconds) is the period used to send ACKs.
 
# Note that to close the connection the double of the time is needed.
 
# On other kernels the period depends on the kernel configuration.
 
#
 
# A reasonable value for this option is 300 seconds, which is the new
 
# Redis default starting with Redis 3.2.1.
 
tcp-keepalive 300
 
 
 
################################# GENERAL #####################################
 
 
 
# By default Redis does not run as a daemon. Use 'yes' if you need it.
 
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
 
daemonize no
 
 
 
# If you run Redis from upstart or systemd, Redis can interact with your
 
# supervision tree. Options:
 
#   supervised no      - no supervision interaction
 
#   supervised upstart - signal upstart by putting Redis into SIGSTOP mode
 
#   supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
 
#   supervised auto    - detect upstart or systemd method based on
 
#                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 
# Note: these supervision methods only signal "process is ready."
 
#       They do not enable continuous liveness pings back to your supervisor.
 
supervised no
 
 
 
# If a pid file is specified, Redis writes it where specified at startup
 
# and removes it at exit.
 
#
 
# When the server runs non daemonized, no pid file is created if none is
 
# specified in the configuration. When the server is daemonized, the pid file
 
# is used even if not specified, defaulting to "/var/run/redis.pid".
 
#
 
# Creating a pid file is best effort: if Redis is not able to create it
 
# nothing bad happens, the server will start and run normally.
 
pidfile /var/run/redis_6379.pid
 
 
 
# Specify the server verbosity level.
 
# This can be one of:
 
# debug (a lot of information, useful for development/testing)
 
# verbose (many rarely useful info, but not a mess like the debug level)
 
# notice (moderately verbose, what you want in production probably)
 
# warning (only very important / critical messages are logged)
 
loglevel notice
 
 
 
# Specify the log file name. Also the empty string can be used to force
 
# Redis to log on the standard output. Note that if you use standard
 
# output for logging but daemonize, logs will be sent to /dev/null
 
logfile ""
 
 
 
# To enable logging to the system logger, just set 'syslog-enabled' to yes,
 
# and optionally update the other syslog parameters to suit your needs.
 
# syslog-enabled no
 
 
 
# Specify the syslog identity.
 
# syslog-ident redis
 
 
 
# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.
 
# syslog-facility local0
 
 
 
# Set the number of databases. The default database is DB 0, you can select
 
# a different one on a per-connection basis using SELECT <dbid> where
 
# dbid is a number between 0 and 'databases'-1
 
databases 16
 
 
 
# By default Redis shows an ASCII art logo only when started to log to the
 
# standard output and if the standard output is a TTY. Basically this means
 
# that normally a logo is displayed only in interactive sessions.
 
#
 
# However it is possible to force the pre-4.0 behavior and always show a
 
# ASCII art logo in startup logs by setting the following option to yes.
 
always-show-logo yes
 
 
 
################################ SNAPSHOTTING  ################################
 
#
 
# Save the DB on disk:
 
#
 
#   save <seconds> <changes>
 
#
 
#   Will save the DB if both the given number of seconds and the given
 
#   number of write operations against the DB occurred.
 
#
 
#   In the example below the behaviour will be to save:
 
#   after 900 sec (15 min) if at least 1 key changed
 
#   after 300 sec (5 min) if at least 10 keys changed
 
#   after 60 sec if at least 10000 keys changed
 
#
 
#   Note: you can disable saving completely by commenting out all "save" lines.
 
#
 
#   It is also possible to remove all the previously configured save
 
#   points by adding a save directive with a single empty string argument
 
#   like in the following example:
 
#
 
#   save ""
 
 
 
save 900 1
 
save 300 10
 
save 60 10000
 
 
 
# By default Redis will stop accepting writes if RDB snapshots are enabled
 
# (at least one save point) and the latest background save failed.
 
# This will make the user aware (in a hard way) that data is not persisting
 
# on disk properly, otherwise chances are that no one will notice and some
 
# disaster will happen.
 
#
 
# If the background saving process will start working again Redis will
 
# automatically allow writes again.
 
#
 
# However if you have setup your proper monitoring of the Redis server
 
# and persistence, you may want to disable this feature so that Redis will
 
# continue to work as usual even if there are problems with disk,
 
# permissions, and so forth.
 
stop-writes-on-bgsave-error yes
 
 
 
# Compress string objects using LZF when dump .rdb databases?
 
# For default that's set to 'yes' as it's almost always a win.
 
# If you want to save some CPU in the saving child set it to 'no' but
 
# the dataset will likely be bigger if you have compressible values or keys.
 
rdbcompression yes
 
 
 
# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
 
# This makes the format more resistant to corruption but there is a performance
 
# hit to pay (around 10%) when saving and loading RDB files, so you can disable it
 
# for maximum performances.
 
#
 
# RDB files created with checksum disabled have a checksum of zero that will
 
# tell the loading code to skip the check.
 
rdbchecksum yes
 
 
 
# The filename where to dump the DB
 
dbfilename dump.rdb
 
 
 
# The working directory.
 
#
 
# The DB will be written inside this directory, with the filename specified
 
# above using the 'dbfilename' configuration directive.
 
#
 
# The Append Only File will also be created inside this directory.
 
#
 
# Note that you must specify a directory here, not a file name.
 
dir ./
 
 
 
################################# REPLICATION #################################
 
 
 
# Master-Replica replication. Use replicaof to make a Redis instance a copy of
 
# another Redis server. A few things to understand ASAP about Redis replication.
 
#
 
#   +------------------+      +---------------+
 
#   |      Master      | ---> |    Replica    |
 
#   | (receive writes) |      |  (exact copy) |
 
#   +------------------+      +---------------+
 
#
 
# 1) Redis replication is asynchronous, but you can configure a master to
 
#    stop accepting writes if it appears to be not connected with at least
 
#    a given number of replicas.
 
# 2) Redis replicas are able to perform a partial resynchronization with the
 
#    master if the replication link is lost for a relatively small amount of
 
#    time. You may want to configure the replication backlog size (see the next
 
#    sections of this file) with a sensible value depending on your needs.
 
# 3) Replication is automatic and does not need user intervention. After a
 
#    network partition replicas automatically try to reconnect to masters
 
#    and resynchronize with them.
 
#
 
# replicaof <masterip> <masterport>
 
 
 
# If the master is password protected (using the "requirepass" configuration
 
# directive below) it is possible to tell the replica to authenticate before
 
# starting the replication synchronization process, otherwise the master will
 
# refuse the replica request.
 
#
 
# masterauth <master-password>
 
 
 
# When a replica loses its connection with the master, or when the replication
 
# is still in progress, the replica can act in two different ways:
 
#
 
# 1) if replica-serve-stale-data is set to 'yes' (the default) the replica will
 
#    still reply to client requests, possibly with out of date data, or the
 
#    data set may just be empty if this is the first synchronization.
 
#
 
# 2) if replica-serve-stale-data is set to 'no' the replica will reply with
 
#    an error "SYNC with master in progress" to all the kind of commands
 
#    but to INFO, replicaOF, AUTH, PING, SHUTDOWN, REPLCONF, ROLE, CONFIG,
 
#    SUBSCRIBE, UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB,
 
#    COMMAND, POST, HOST: and LATENCY.
 
#
 
replica-serve-stale-data yes
 
 
 
# You can configure a replica instance to accept writes or not. Writing against
 
# a replica instance may be useful to store some ephemeral data (because data
 
# written on a replica will be easily deleted after resync with the master) but
 
# may also cause problems if clients are writing to it because of a
 
# misconfiguration.
 
#
 
# Since Redis 2.6 by default replicas are read-only.
 
#
 
# Note: read only replicas are not designed to be exposed to untrusted clients
 
# on the internet. It's just a protection layer against misuse of the instance.
 
# Still a read only replica exports by default all the administrative commands
 
# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
 
# security of read only replicas using 'rename-command' to shadow all the
 
# administrative / dangerous commands.
 
replica-read-only yes
 
 
 
# Replication SYNC strategy: disk or socket.
 
#
 
# -------------------------------------------------------
 
# WARNING: DISKLESS REPLICATION IS EXPERIMENTAL CURRENTLY
 
# -------------------------------------------------------
 
#
 
# New replicas and reconnecting replicas that are not able to continue the replication
 
# process just receiving differences, need to do what is called a "full
 
# synchronization". An RDB file is transmitted from the master to the replicas.
 
# The transmission can happen in two different ways:
 
#
 
# 1) Disk-backed: The Redis master creates a new process that writes the RDB
 
#                 file on disk. Later the file is transferred by the parent
 
#                 process to the replicas incrementally.
 
# 2) Diskless: The Redis master creates a new process that directly writes the
 
#              RDB file to replica sockets, without touching the disk at all.
 
#
 
# With disk-backed replication, while the RDB file is generated, more replicas
 
# can be queued and served with the RDB file as soon as the current child producing
 
# the RDB file finishes its work. With diskless replication instead once
 
# the transfer starts, new replicas arriving will be queued and a new transfer
 
# will start when the current one terminates.
 
#
 
# When diskless replication is used, the master waits a configurable amount of
 
# time (in seconds) before starting the transfer in the hope that multiple replicas
 
# will arrive and the transfer can be parallelized.
 
#
 
# With slow disks and fast (large bandwidth) networks, diskless replication
 
# works better.
 
repl-diskless-sync no
 
 
 
# When diskless replication is enabled, it is possible to configure the delay
 
# the server waits in order to spawn the child that transfers the RDB via socket
 
# to the replicas.
 
#
 
# This is important since once the transfer starts, it is not possible to serve
 
# new replicas arriving, that will be queued for the next RDB transfer, so the server
 
# waits a delay in order to let more replicas arrive.
 
#
 
# The delay is specified in seconds, and by default is 5 seconds. To disable
 
# it entirely just set it to 0 seconds and the transfer will start ASAP.
 
repl-diskless-sync-delay 5
 
 
 
# Replicas send PINGs to server in a predefined interval. It's possible to change
 
# this interval with the repl_ping_replica_period option. The default value is 10
 
# seconds.
 
#
 
# repl-ping-replica-period 10
 
 
 
# The following option sets the replication timeout for:
 
#
 
# 1) Bulk transfer I/O during SYNC, from the point of view of replica.
 
# 2) Master timeout from the point of view of replicas (data, pings).
 
# 3) Replica timeout from the point of view of masters (REPLCONF ACK pings).
 
#
 
# It is important to make sure that this value is greater than the value
 
# specified for repl-ping-replica-period otherwise a timeout will be detected
 
# every time there is low traffic between the master and the replica.
 
#
 
# repl-timeout 60
 
 
 
# Disable TCP_NODELAY on the replica socket after SYNC?
 
#
 
# If you select "yes" Redis will use a smaller number of TCP packets and
 
# less bandwidth to send data to replicas. But this can add a delay for
 
# the data to appear on the replica side, up to 40 milliseconds with
 
# Linux kernels using a default configuration.
 
#
 
# If you select "no" the delay for data to appear on the replica side will
 
# be reduced but more bandwidth will be used for replication.
 
#
 
# By default we optimize for low latency, but in very high traffic conditions
 
# or when the master and replicas are many hops away, turning this to "yes" may
 
# be a good idea.
 
repl-disable-tcp-nodelay no
 
 
 
# Set the replication backlog size. The backlog is a buffer that accumulates
 
# replica data when replicas are disconnected for some time, so that when a replica
 
# wants to reconnect again, often a full resync is not needed, but a partial
 
# resync is enough, just passing the portion of data the replica missed while
 
# disconnected.
 
#
 
# The bigger the replication backlog, the longer the time the replica can be
 
# disconnected and later be able to perform a partial resynchronization.
 
#
 
# The backlog is only allocated once there is at least a replica connected.
 
#
 
# repl-backlog-size 1mb
 
 
 
# After a master has no longer connected replicas for some time, the backlog
 
# will be freed. The following option configures the amount of seconds that
 
# need to elapse, starting from the time the last replica disconnected, for
 
# the backlog buffer to be freed.
 
#
 
# Note that replicas never free the backlog for timeout, since they may be
 
# promoted to masters later, and should be able to correctly "partially
 
# resynchronize" with the replicas: hence they should always accumulate backlog.
 
#
 
# A value of 0 means to never release the backlog.
 
#
 
# repl-backlog-ttl 3600
 
 
 
# The replica priority is an integer number published by Redis in the INFO output.
 
# It is used by Redis Sentinel in order to select a replica to promote into a
 
# master if the master is no longer working correctly.
 
#
 
# A replica with a low priority number is considered better for promotion, so
 
# for instance if there are three replicas with priority 10, 100, 25 Sentinel will
 
# pick the one with priority 10, that is the lowest.
 
#
 
# However a special priority of 0 marks the replica as not able to perform the
 
# role of master, so a replica with priority of 0 will never be selected by
 
# Redis Sentinel for promotion.
 
#
 
# By default the priority is 100.
 
replica-priority 100
 
 
 
# It is possible for a master to stop accepting writes if there are less than
 
# N replicas connected, having a lag less or equal than M seconds.
 
#
 
# The N replicas need to be in "online" state.
 
#
 
# The lag in seconds, that must be <= the specified value, is calculated from
 
# the last ping received from the replica, that is usually sent every second.
 
#
 
# This option does not GUARANTEE that N replicas will accept the write, but
 
# will limit the window of exposure for lost writes in case not enough replicas
 
# are available, to the specified number of seconds.
 
#
 
# For example to require at least 3 replicas with a lag <= 10 seconds use:
 
#
 
# min-replicas-to-write 3
 
# min-replicas-max-lag 10
 
#
 
# Setting one or the other to 0 disables the feature.
 
#
 
# By default min-replicas-to-write is set to 0 (feature disabled) and
 
# min-replicas-max-lag is set to 10.
 
 
 
# A Redis master is able to list the address and port of the attached
 
# replicas in different ways. For example the "INFO replication" section
 
# offers this information, which is used, among other tools, by
 
# Redis Sentinel in order to discover replica instances.
 
# Another place where this info is available is in the output of the
 
# "ROLE" command of a master.
 
#
 
# The listed IP and address normally reported by a replica is obtained
 
# in the following way:
 
#
 
#   IP: The address is auto detected by checking the peer address
 
#   of the socket used by the replica to connect with the master.
 
#
 
#   Port: The port is communicated by the replica during the replication
 
#   handshake, and is normally the port that the replica is using to
 
#   listen for connections.
 
#
 
# However when port forwarding or Network Address Translation (NAT) is
 
# used, the replica may be actually reachable via different IP and port
 
# pairs. The following two options can be used by a replica in order to
 
# report to its master a specific set of IP and port, so that both INFO
 
# and ROLE will report those values.
 
#
 
# There is no need to use both the options if you need to override just
 
# the port or the IP address.
 
#
 
# replica-announce-ip 5.5.5.5
 
# replica-announce-port 1234
 
 
 
################################## SECURITY ###################################
 
 
 
# Require clients to issue AUTH <PASSWORD> before processing any other
 
# commands.  This might be useful in environments in which you do not trust
 
# others with access to the host running redis-server.
 
#
 
# This should stay commented out for backward compatibility and because most
 
# people do not need auth (e.g. they run their own servers).
 
#
 
# Warning: since Redis is pretty fast an outside user can try up to
 
# 150k passwords per second against a good box. This means that you should
 
# use a very strong password otherwise it will be very easy to break.
 
#
 
# requirepass foobared
 
 
 
# Command renaming.
 
#
 
# It is possible to change the name of dangerous commands in a shared
 
# environment. For instance the CONFIG command may be renamed into something
 
# hard to guess so that it will still be available for internal-use tools
 
# but not available for general clients.
 
#
 
# Example:
 
#
 
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
 
#
 
# It is also possible to completely kill a command by renaming it into
 
# an empty string:
 
#
 
# rename-command CONFIG ""
 
#
 
# Please note that changing the name of commands that are logged into the
 
# AOF file or transmitted to replicas may cause problems.
 
 
 
################################### CLIENTS ####################################
 
 
 
# Set the max number of connected clients at the same time. By default
 
# this limit is set to 10000 clients, however if the Redis server is not
 
# able to configure the process file limit to allow for the specified limit
 
# the max number of allowed clients is set to the current file limit
 
# minus 32 (as Redis reserves a few file descriptors for internal uses).
 
#
 
# Once the limit is reached Redis will close all the new connections sending
 
# an error 'max number of clients reached'.
 
#
 
# maxclients 10000
 
 
 
############################## MEMORY MANAGEMENT ################################
 
 
 
# Set a memory usage limit to the specified amount of bytes.
 
# When the memory limit is reached Redis will try to remove keys
 
# according to the eviction policy selected (see maxmemory-policy).
 
#
 
# If Redis can't remove keys according to the policy, or if the policy is
 
# set to 'noeviction', Redis will start to reply with errors to commands
 
# that would use more memory, like SET, LPUSH, and so on, and will continue
 
# to reply to read-only commands like GET.
 
#
 
# This option is usually useful when using Redis as an LRU or LFU cache, or to
 
# set a hard memory limit for an instance (using the 'noeviction' policy).
 
#
 
# WARNING: If you have replicas attached to an instance with maxmemory on,
 
# the size of the output buffers needed to feed the replicas are subtracted
 
# from the used memory count, so that network problems / resyncs will
 
# not trigger a loop where keys are evicted, and in turn the output
 
# buffer of replicas is full with DELs of keys evicted triggering the deletion
 
# of more keys, and so forth until the database is completely emptied.
 
#
 
# In short... if you have replicas attached it is suggested that you set a lower
 
# limit for maxmemory so that there is some free RAM on the system for replica
 
# output buffers (but this is not needed if the policy is 'noeviction').
 
#
 
# maxmemory <bytes>
 
 
 
# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
 
# is reached. You can select among five behaviors:
 
#
 
# volatile-lru -> Evict using approximated LRU among the keys with an expire set.
 
# allkeys-lru -> Evict any key using approximated LRU.
 
# volatile-lfu -> Evict using approximated LFU among the keys with an expire set.
 
# allkeys-lfu -> Evict any key using approximated LFU.
 
# volatile-random -> Remove a random key among the ones with an expire set.
 
# allkeys-random -> Remove a random key, any key.
 
# volatile-ttl -> Remove the key with the nearest expire time (minor TTL)
 
# noeviction -> Don't evict anything, just return an error on write operations.
 
#
 
# LRU means Least Recently Used
 
# LFU means Least Frequently Used
 
#
 
# Both LRU, LFU and volatile-ttl are implemented using approximated
 
# randomized algorithms.
 
#
 
# Note: with any of the above policies, Redis will return an error on write
 
#       operations, when there are no suitable keys for eviction.
 
#
 
#       At the date of writing these commands are: set setnx setex append
 
#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
 
#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
 
#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
 
#       getset mset msetnx exec sort
 
#
 
# The default is:
 
#
 
# maxmemory-policy noeviction
 
 
 
# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated
 
# algorithms (in order to save memory), so you can tune it for speed or
 
# accuracy. For default Redis will check five keys and pick the one that was
 
# used less recently, you can change the sample size using the following
 
# configuration directive.
 
#
 
# The default of 5 produces good enough results. 10 Approximates very closely
 
# true LRU but costs more CPU. 3 is faster but not very accurate.
 
#
 
# maxmemory-samples 5
 
 
 
# Starting from Redis 5, by default a replica will ignore its maxmemory setting
 
# (unless it is promoted to master after a failover or manually). It means
 
# that the eviction of keys will be just handled by the master, sending the
 
# DEL commands to the replica as keys evict in the master side.
 
#
 
# This behavior ensures that masters and replicas stay consistent, and is usually
 
# what you want, however if your replica is writable, or you want the replica to have
 
# a different memory setting, and you are sure all the writes performed to the
 
# replica are idempotent, then you may change this default (but be sure to understand
 
# what you are doing).
 
#
 
# Note that since the replica by default does not evict, it may end using more
 
# memory than the one set via maxmemory (there are certain buffers that may
 
# be larger on the replica, or data structures may sometimes take more memory and so
 
# forth). So make sure you monitor your replicas and make sure they have enough
 
# memory to never hit a real out-of-memory condition before the master hits
 
# the configured maxmemory setting.
 
#
 
# replica-ignore-maxmemory yes
 
 
 
############################# LAZY FREEING ####################################
 
 
 
# Redis has two primitives to delete keys. One is called DEL and is a blocking
 
# deletion of the object. It means that the server stops processing new commands
 
# in order to reclaim all the memory associated with an object in a synchronous
 
# way. If the key deleted is associated with a small object, the time needed
 
# in order to execute the DEL command is very small and comparable to most other
 
# O(1) or O(log_N) commands in Redis. However if the key is associated with an
 
# aggregated value containing millions of elements, the server can block for
 
# a long time (even seconds) in order to complete the operation.
 
#
 
# For the above reasons Redis also offers non blocking deletion primitives
 
# such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and
 
# FLUSHDB commands, in order to reclaim memory in background. Those commands
 
# are executed in constant time. Another thread will incrementally free the
 
# object in the background as fast as possible.
 
#
 
# DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled.
 
# It's up to the design of the application to understand when it is a good
 
# idea to use one or the other. However the Redis server sometimes has to
 
# delete keys or flush the whole database as a side effect of other operations.
 
# Specifically Redis deletes objects independently of a user call in the
 
# following scenarios:
 
#
 
# 1) On eviction, because of the maxmemory and maxmemory policy configurations,
 
#    in order to make room for new data, without going over the specified
 
#    memory limit.
 
# 2) Because of expire: when a key with an associated time to live (see the
 
#    EXPIRE command) must be deleted from memory.
 
# 3) Because of a side effect of a command that stores data on a key that may
 
#    already exist. For example the RENAME command may delete the old key
 
#    content when it is replaced with another one. Similarly SUNIONSTORE
 
#    or SORT with STORE option may delete existing keys. The SET command
 
#    itself removes any old content of the specified key in order to replace
 
#    it with the specified string.
 
# 4) During replication, when a replica performs a full resynchronization with
 
#    its master, the content of the whole database is removed in order to
 
#    load the RDB file just transferred.
 
#
 
# In all the above cases the default is to delete objects in a blocking way,
 
# like if DEL was called. However you can configure each case specifically
 
# in order to instead release memory in a non-blocking way like if UNLINK
 
# was called, using the following configuration directives:
 
 
 
lazyfree-lazy-eviction no
 
lazyfree-lazy-expire no
 
lazyfree-lazy-server-del no
 
replica-lazy-flush no
 
 
 
############################## APPEND ONLY MODE ###############################
 
 
 
# By default Redis asynchronously dumps the dataset on disk. This mode is
 
# good enough in many applications, but an issue with the Redis process or
 
# a power outage may result into a few minutes of writes lost (depending on
 
# the configured save points).
 
#
 
# The Append Only File is an alternative persistence mode that provides
 
# much better durability. For instance using the default data fsync policy
 
# (see later in the config file) Redis can lose just one second of writes in a
 
# dramatic event like a server power outage, or a single write if something
 
# wrong with the Redis process itself happens, but the operating system is
 
# still running correctly.
 
#
 
# AOF and RDB persistence can be enabled at the same time without problems.
 
# If the AOF is enabled on startup Redis will load the AOF, that is the file
 
# with the better durability guarantees.
 
#
 
# Please check http://redis.io/topics/persistence for more information.
 
 
 
appendonly no
 
 
 
# The name of the append only file (default: "appendonly.aof")
 
 
 
appendfilename "appendonly.aof"
 
 
 
# The fsync() call tells the Operating System to actually write data on disk
 
# instead of waiting for more data in the output buffer. Some OS will really flush
 
# data on disk, some other OS will just try to do it ASAP.
 
#
 
# Redis supports three different modes:
 
#
 
# no: don't fsync, just let the OS flush the data when it wants. Faster.
 
# always: fsync after every write to the append only log. Slow, Safest.
 
# everysec: fsync only one time every second. Compromise.
 
#
 
# The default is "everysec", as that's usually the right compromise between
 
# speed and data safety. It's up to you to understand if you can relax this to
 
# "no" that will let the operating system flush the output buffer when
 
# it wants, for better performances (but if you can live with the idea of
 
# some data loss consider the default persistence mode that's snapshotting),
 
# or on the contrary, use "always" that's very slow but a bit safer than
 
# everysec.
 
#
 
# More details please check the following article:
 
# http://antirez.com/post/redis-persistence-demystified.html
 
#
 
# If unsure, use "everysec".
 
 
 
# appendfsync always
 
appendfsync everysec
 
# appendfsync no
 
 
 
# When the AOF fsync policy is set to always or everysec, and a background
 
# saving process (a background save or AOF log background rewriting) is
 
# performing a lot of I/O against the disk, in some Linux configurations
 
# Redis may block too long on the fsync() call. Note that there is no fix for
 
# this currently, as even performing fsync in a different thread will block
 
# our synchronous write(2) call.
 
#
 
# In order to mitigate this problem it's possible to use the following option
 
# that will prevent fsync() from being called in the main process while a
 
# BGSAVE or BGREWRITEAOF is in progress.
 
#
 
# This means that while another child is saving, the durability of Redis is
 
# the same as "appendfsync none". In practical terms, this means that it is
 
# possible to lose up to 30 seconds of log in the worst scenario (with the
 
# default Linux settings).
 
#
 
# If you have latency problems turn this to "yes". Otherwise leave it as
 
# "no" that is the safest pick from the point of view of durability.
 
 
 
no-appendfsync-on-rewrite no
 
 
 
# Automatic rewrite of the append only file.
 
# Redis is able to automatically rewrite the log file implicitly calling
 
# BGREWRITEAOF when the AOF log size grows by the specified percentage.
 
#
 
# This is how it works: Redis remembers the size of the AOF file after the
 
# latest rewrite (if no rewrite has happened since the restart, the size of
 
# the AOF at startup is used).
 
#
 
# This base size is compared to the current size. If the current size is
 
# bigger than the specified percentage, the rewrite is triggered. Also
 
# you need to specify a minimal size for the AOF file to be rewritten, this
 
# is useful to avoid rewriting the AOF file even if the percentage increase
 
# is reached but it is still pretty small.
 
#
 
# Specify a percentage of zero in order to disable the automatic AOF
 
# rewrite feature.
 
 
 
auto-aof-rewrite-percentage 100
 
auto-aof-rewrite-min-size 64mb
 
 
 
# An AOF file may be found to be truncated at the end during the Redis
 
# startup process, when the AOF data gets loaded back into memory.
 
# This may happen when the system where Redis is running
 
# crashes, especially when an ext4 filesystem is mounted without the
 
# data=ordered option (however this can't happen when Redis itself
 
# crashes or aborts but the operating system still works correctly).
 
#
 
# Redis can either exit with an error when this happens, or load as much
 
# data as possible (the default now) and start if the AOF file is found
 
# to be truncated at the end. The following option controls this behavior.
 
#
 
# If aof-load-truncated is set to yes, a truncated AOF file is loaded and
 
# the Redis server starts emitting a log to inform the user of the event.
 
# Otherwise if the option is set to no, the server aborts with an error
 
# and refuses to start. When the option is set to no, the user requires
 
# to fix the AOF file using the "redis-check-aof" utility before to restart
 
# the server.
 
#
 
# Note that if the AOF file will be found to be corrupted in the middle
 
# the server will still exit with an error. This option only applies when
 
# Redis will try to read more data from the AOF file but not enough bytes
 
# will be found.
 
aof-load-truncated yes
 
 
 
# When rewriting the AOF file, Redis is able to use an RDB preamble in the
 
# AOF file for faster rewrites and recoveries. When this option is turned
 
# on the rewritten AOF file is composed of two different stanzas:
 
#
 
#   [RDB file][AOF tail]
 
#
 
# When loading Redis recognizes that the AOF file starts with the "REDIS"
 
# string and loads the prefixed RDB file, and continues loading the AOF
 
# tail.
 
aof-use-rdb-preamble yes
 
 
 
################################ LUA SCRIPTING  ###############################
 
 
 
# Max execution time of a Lua script in milliseconds.
 
#
 
# If the maximum execution time is reached Redis will log that a script is
 
# still in execution after the maximum allowed time and will start to
 
# reply to queries with an error.
 
#
 
# When a long running script exceeds the maximum execution time only the
 
# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be
 
# used to stop a script that did not yet called write commands. The second
 
# is the only way to shut down the server in the case a write command was
 
# already issued by the script but the user doesn't want to wait for the natural
 
# termination of the script.
 
#
 
# Set it to 0 or a negative value for unlimited execution without warnings.
 
lua-time-limit 5000
 
 
 
################################ REDIS CLUSTER  ###############################
 
 
 
# Normal Redis instances can't be part of a Redis Cluster; only nodes that are
 
# started as cluster nodes can. In order to start a Redis instance as a
 
# cluster node enable the cluster support uncommenting the following:
 
#
 
# cluster-enabled yes
 
 
 
# Every cluster node has a cluster configuration file. This file is not
 
# intended to be edited by hand. It is created and updated by Redis nodes.
 
# Every Redis Cluster node requires a different cluster configuration file.
 
# Make sure that instances running in the same system do not have
 
# overlapping cluster configuration file names.
 
#
 
# cluster-config-file nodes-6379.conf
 
 
 
# Cluster node timeout is the amount of milliseconds a node must be unreachable
 
# for it to be considered in failure state.
 
# Most other internal time limits are multiple of the node timeout.
 
#
 
# cluster-node-timeout 15000
 
 
 
# A replica of a failing master will avoid to start a failover if its data
 
# looks too old.
 
#
 
# There is no simple way for a replica to actually have an exact measure of
 
# its "data age", so the following two checks are performed:
 
#
 
# 1) If there are multiple replicas able to failover, they exchange messages
 
#    in order to try to give an advantage to the replica with the best
 
#    replication offset (more data from the master processed).
 
#    Replicas will try to get their rank by offset, and apply to the start
 
#    of the failover a delay proportional to their rank.
 
#
 
# 2) Every single replica computes the time of the last interaction with
 
#    its master. This can be the last ping or command received (if the master
 
#    is still in the "connected" state), or the time that elapsed since the
 
#    disconnection with the master (if the replication link is currently down).
 
#    If the last interaction is too old, the replica will not try to failover
 
#    at all.
 
#
 
# The point "2" can be tuned by user. Specifically a replica will not perform
 
# the failover if, since the last interaction with the master, the time
 
# elapsed is greater than:
 
#
 
#   (node-timeout * replica-validity-factor) + repl-ping-replica-period
 
#
 
# So for example if node-timeout is 30 seconds, and the replica-validity-factor
 
# is 10, and assuming a default repl-ping-replica-period of 10 seconds, the
 
# replica will not try to failover if it was not able to talk with the master
 
# for longer than 310 seconds.
 
#
 
# A large replica-validity-factor may allow replicas with too old data to failover
 
# a master, while a too small value may prevent the cluster from being able to
 
# elect a replica at all.
 
#
 
# For maximum availability, it is possible to set the replica-validity-factor
 
# to a value of 0, which means, that replicas will always try to failover the
 
# master regardless of the last time they interacted with the master.
 
# (However they'll always try to apply a delay proportional to their
 
# offset rank).
 
#
 
# Zero is the only value able to guarantee that when all the partitions heal
 
# the cluster will always be able to continue.
 
#
 
# cluster-replica-validity-factor 10
 
 
 
# Cluster replicas are able to migrate to orphaned masters, that are masters
 
# that are left without working replicas. This improves the cluster ability
 
# to resist to failures as otherwise an orphaned master can't be failed over
 
# in case of failure if it has no working replicas.
 
#
 
# Replicas migrate to orphaned masters only if there are still at least a
 
# given number of other working replicas for their old master. This number
 
# is the "migration barrier". A migration barrier of 1 means that a replica
 
# will migrate only if there is at least 1 other working replica for its master
 
# and so forth. It usually reflects the number of replicas you want for every
 
# master in your cluster.
 
#
 
# Default is 1 (replicas migrate only if their masters remain with at least
 
# one replica). To disable migration just set it to a very large value.
 
# A value of 0 can be set but is useful only for debugging and dangerous
 
# in production.
 
#
 
# cluster-migration-barrier 1
 
 
 
# By default Redis Cluster nodes stop accepting queries if they detect there
 
# is at least an hash slot uncovered (no available node is serving it).
 
# This way if the cluster is partially down (for example a range of hash slots
 
# are no longer covered) all the cluster becomes, eventually, unavailable.
 
# It automatically returns available as soon as all the slots are covered again.
 
#
 
# However sometimes you want the subset of the cluster which is working,
 
# to continue to accept queries for the part of the key space that is still
 
# covered. In order to do so, just set the cluster-require-full-coverage
 
# option to no.
 
#
 
# cluster-require-full-coverage yes
 
 
 
# This option, when set to yes, prevents replicas from trying to failover its
 
# master during master failures. However the master can still perform a
 
# manual failover, if forced to do so.
 
#
 
# This is useful in different scenarios, especially in the case of multiple
 
# data center operations, where we want one side to never be promoted if not
 
# in the case of a total DC failure.
 
#
 
# cluster-replica-no-failover no
 
 
 
# In order to setup your cluster make sure to read the documentation
 
# available at http://redis.io web site.
 
 
 
########################## CLUSTER DOCKER/NAT support  ########################
 
 
 
# In certain deployments, Redis Cluster nodes address discovery fails, because
 
# addresses are NAT-ted or because ports are forwarded (the typical case is
 
# Docker and other containers).
 
#
 
# In order to make Redis Cluster working in such environments, a static
 
# configuration where each node knows its public address is needed. The
 
# following two options are used for this scope, and are:
 
#
 
# * cluster-announce-ip
 
# * cluster-announce-port
 
# * cluster-announce-bus-port
 
#
 
# Each instruct the node about its address, client port, and cluster message
 
# bus port. The information is then published in the header of the bus packets
 
# so that other nodes will be able to correctly map the address of the node
 
# publishing the information.
 
#
 
# If the above options are not used, the normal Redis Cluster auto-detection
 
# will be used instead.
 
#
 
# Note that when remapped, the bus port may not be at the fixed offset of
 
# clients port + 10000, so you can specify any port and bus-port depending
 
# on how they get remapped. If the bus-port is not set, a fixed offset of
 
# 10000 will be used as usually.
 
#
 
# Example:
 
#
 
# cluster-announce-ip 10.1.1.5
 
# cluster-announce-port 6379
 
# cluster-announce-bus-port 6380
 
 
 
################################## SLOW LOG ###################################
 
 
 
# The Redis Slow Log is a system to log queries that exceeded a specified
 
# execution time. The execution time does not include the I/O operations
 
# like talking with the client, sending the reply and so forth,
 
# but just the time needed to actually execute the command (this is the only
 
# stage of command execution where the thread is blocked and can not serve
 
# other requests in the meantime).
 
#
 
# You can configure the slow log with two parameters: one tells Redis
 
# what is the execution time, in microseconds, to exceed in order for the
 
# command to get logged, and the other parameter is the length of the
 
# slow log. When a new command is logged the oldest one is removed from the
 
# queue of logged commands.
 
 
 
# The following time is expressed in microseconds, so 1000000 is equivalent
 
# to one second. Note that a negative number disables the slow log, while
 
# a value of zero forces the logging of every command.
 
slowlog-log-slower-than 10000
 
 
 
# There is no limit to this length. Just be aware that it will consume memory.
 
# You can reclaim memory used by the slow log with SLOWLOG RESET.
 
slowlog-max-len 128
 
 
 
################################ LATENCY MONITOR ##############################
 
 
 
# The Redis latency monitoring subsystem samples different operations
 
# at runtime in order to collect data related to possible sources of
 
# latency of a Redis instance.
 
#
 
# Via the LATENCY command this information is available to the user that can
 
# print graphs and obtain reports.
 
#
 
# The system only logs operations that were performed in a time equal or
 
# greater than the amount of milliseconds specified via the
 
# latency-monitor-threshold configuration directive. When its value is set
 
# to zero, the latency monitor is turned off.
 
#
 
# By default latency monitoring is disabled since it is mostly not needed
 
# if you don't have latency issues, and collecting data has a performance
 
# impact, that while very small, can be measured under big load. Latency
 
# monitoring can easily be enabled at runtime using the command
 
# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed.
 
latency-monitor-threshold 0
 
 
 
############################# EVENT NOTIFICATION ##############################
 
 
 
# Redis can notify Pub/Sub clients about events happening in the key space.
 
# This feature is documented at http://redis.io/topics/notifications
 
#
 
# For instance if keyspace events notification is enabled, and a client
 
# performs a DEL operation on key "foo" stored in the Database 0, two
 
# messages will be published via Pub/Sub:
 
#
 
# PUBLISH __keyspace@0__:foo del
 
# PUBLISH __keyevent@0__:del foo
 
#
 
# It is possible to select the events that Redis will notify among a set
 
# of classes. Every class is identified by a single character:
 
#
 
#  K     Keyspace events, published with __keyspace@<db>__ prefix.
 
#  E     Keyevent events, published with __keyevent@<db>__ prefix.
 
#  g     Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ...
 
#  $     String commands
 
#  l     List commands
 
#  s     Set commands
 
#  h     Hash commands
 
#  z     Sorted set commands
 
#  x     Expired events (events generated every time a key expires)
 
#  e     Evicted events (events generated when a key is evicted for maxmemory)
 
#  A     Alias for g$lshzxe, so that the "AKE" string means all the events.
 
#
 
#  The "notify-keyspace-events" takes as argument a string that is composed
 
#  of zero or multiple characters. The empty string means that notifications
 
#  are disabled.
 
#
 
#  Example: to enable list and generic events, from the point of view of the
 
#           event name, use:
 
#
 
#  notify-keyspace-events Elg
 
#
 
#  Example 2: to get the stream of the expired keys subscribing to channel
 
#             name __keyevent@0__:expired use:
 
#
 
  notify-keyspace-events Ex
 
#
 
#  By default all notifications are disabled because most users don't need
 
#  this feature and the feature has some overhead. Note that if you don't
 
#  specify at least one of K or E, no events will be delivered.
 
#notify-keyspace-events ""
 
 
 
############################### ADVANCED CONFIG ###############################
 
 
 
# Hashes are encoded using a memory efficient data structure when they have a
 
# small number of entries, and the biggest entry does not exceed a given
 
# threshold. These thresholds can be configured using the following directives.
 
hash-max-ziplist-entries 512
 
hash-max-ziplist-value 64
 
 
 
# Lists are also encoded in a special way to save a lot of space.
 
# The number of entries allowed per internal list node can be specified
 
# as a fixed maximum size or a maximum number of elements.
 
# For a fixed maximum size, use -5 through -1, meaning:
 
# -5: max size: 64 Kb  <-- not recommended for normal workloads
 
# -4: max size: 32 Kb  <-- not recommended
 
# -3: max size: 16 Kb  <-- probably not recommended
 
# -2: max size: 8 Kb   <-- good
 
# -1: max size: 4 Kb   <-- good
 
# Positive numbers mean store up to _exactly_ that number of elements
 
# per list node.
 
# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
 
# but if your use case is unique, adjust the settings as necessary.
 
list-max-ziplist-size -2
 
 
 
# Lists may also be compressed.
 
# Compress depth is the number of quicklist ziplist nodes from *each* side of
 
# the list to *exclude* from compression.  The head and tail of the list
 
# are always uncompressed for fast push/pop operations.  Settings are:
 
# 0: disable all list compression
 
# 1: depth 1 means "don't start compressing until after 1 node into the list,
 
#    going from either the head or tail"
 
#    So: [head]->node->node->...->node->[tail]
 
#    [head], [tail] will always be uncompressed; inner nodes will compress.
 
# 2: [head]->[next]->node->node->...->node->[prev]->[tail]
 
#    2 here means: don't compress head or head->next or tail->prev or tail,
 
#    but compress all nodes between them.
 
# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
 
# etc.
 
list-compress-depth 0
 
 
 
# Sets have a special encoding in just one case: when a set is composed
 
# of just strings that happen to be integers in radix 10 in the range
 
# of 64 bit signed integers.
 
# The following configuration setting sets the limit in the size of the
 
# set in order to use this special memory saving encoding.
 
set-max-intset-entries 512
 
 
 
# Similarly to hashes and lists, sorted sets are also specially encoded in
 
# order to save a lot of space. This encoding is only used when the length and
 
# elements of a sorted set are below the following limits:
 
zset-max-ziplist-entries 128
 
zset-max-ziplist-value 64
 
 
 
# HyperLogLog sparse representation bytes limit. The limit includes the
 
# 16 bytes header. When an HyperLogLog using the sparse representation crosses
 
# this limit, it is converted into the dense representation.
 
#
 
# A value greater than 16000 is totally useless, since at that point the
 
# dense representation is more memory efficient.
 
#
 
# The suggested value is ~ 3000 in order to have the benefits of
 
# the space efficient encoding without slowing down too much PFADD,
 
# which is O(N) with the sparse encoding. The value can be raised to
 
# ~ 10000 when CPU is not a concern, but space is, and the data set is
 
# composed of many HyperLogLogs with cardinality in the 0 - 15000 range.
 
hll-sparse-max-bytes 3000
 
 
 
# Streams macro node max size / items. The stream data structure is a radix
 
# tree of big nodes that encode multiple items inside. Using this configuration
 
# it is possible to configure how big a single node can be in bytes, and the
 
# maximum number of items it may contain before switching to a new node when
 
# appending new stream entries. If any of the following settings are set to
 
# zero, the limit is ignored, so for instance it is possible to set just a
 
# max entires limit by setting max-bytes to 0 and max-entries to the desired
 
# value.
 
stream-node-max-bytes 4096
 
stream-node-max-entries 100
 
 
 
# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
 
# order to help rehashing the main Redis hash table (the one mapping top-level
 
# keys to values). The hash table implementation Redis uses (see dict.c)
 
# performs a lazy rehashing: the more operation you run into a hash table
 
# that is rehashing, the more rehashing "steps" are performed, so if the
 
# server is idle the rehashing is never complete and some more memory is used
 
# by the hash table.
 
#
 
# The default is to use this millisecond 10 times every second in order to
 
# actively rehash the main dictionaries, freeing memory when possible.
 
#
 
# If unsure:
 
# use "activerehashing no" if you have hard latency requirements and it is
 
# not a good thing in your environment that Redis can reply from time to time
 
# to queries with 2 milliseconds delay.
 
#
 
# use "activerehashing yes" if you don't have such hard requirements but
 
# want to free memory asap when possible.
 
activerehashing yes
 
 
 
# The client output buffer limits can be used to force disconnection of clients
 
# that are not reading data from the server fast enough for some reason (a
 
# common reason is that a Pub/Sub client can't consume messages as fast as the
 
# publisher can produce them).
 
#
 
# The limit can be set differently for the three different classes of clients:
 
#
 
# normal -> normal clients including MONITOR clients
 
# replica  -> replica clients
 
# pubsub -> clients subscribed to at least one pubsub channel or pattern
 
#
 
# The syntax of every client-output-buffer-limit directive is the following:
 
#
 
# client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>
 
#
 
# A client is immediately disconnected once the hard limit is reached, or if
 
# the soft limit is reached and remains reached for the specified number of
 
# seconds (continuously).
 
# So for instance if the hard limit is 32 megabytes and the soft limit is
 
# 16 megabytes / 10 seconds, the client will get disconnected immediately
 
# if the size of the output buffers reach 32 megabytes, but will also get
 
# disconnected if the client reaches 16 megabytes and continuously overcomes
 
# the limit for 10 seconds.
 
#
 
# By default normal clients are not limited because they don't receive data
 
# without asking (in a push way), but just after a request, so only
 
# asynchronous clients may create a scenario where data is requested faster
 
# than it can read.
 
#
 
# Instead there is a default limit for pubsub and replica clients, since
 
# subscribers and replicas receive data in a push fashion.
 
#
 
# Both the hard or the soft limit can be disabled by setting them to zero.
 
client-output-buffer-limit normal 0 0 0
 
client-output-buffer-limit replica 256mb 64mb 60
 
client-output-buffer-limit pubsub 32mb 8mb 60
 
 
 
# Client query buffers accumulate new commands. They are limited to a fixed
 
# amount by default in order to avoid that a protocol desynchronization (for
 
# instance due to a bug in the client) will lead to unbound memory usage in
 
# the query buffer. However you can configure it here if you have very special
 
# needs, such us huge multi/exec requests or alike.
 
#
 
# client-query-buffer-limit 1gb
 
 
 
# In the Redis protocol, bulk requests, that are, elements representing single
 
# strings, are normally limited ot 512 mb. However you can change this limit
 
# here.
 
#
 
# proto-max-bulk-len 512mb
 
 
 
# Redis calls an internal function to perform many background tasks, like
 
# closing connections of clients in timeout, purging expired keys that are
 
# never requested, and so forth.
 
#
 
# Not all tasks are performed with the same frequency, but Redis checks for
 
# tasks to perform according to the specified "hz" value.
 
#
 
# By default "hz" is set to 10. Raising the value will use more CPU when
 
# Redis is idle, but at the same time will make Redis more responsive when
 
# there are many keys expiring at the same time, and timeouts may be
 
# handled with more precision.
 
#
 
# The range is between 1 and 500, however a value over 100 is usually not
 
# a good idea. Most users should use the default of 10 and raise this up to
 
# 100 only in environments where very low latency is required.
 
hz 10
 
 
 
# Normally it is useful to have an HZ value which is proportional to the
 
# number of clients connected. This is useful in order, for instance, to
 
# avoid too many clients are processed for each background task invocation
 
# in order to avoid latency spikes.
 
#
 
# Since the default HZ value by default is conservatively set to 10, Redis
 
# offers, and enables by default, the ability to use an adaptive HZ value
 
# which will temporary raise when there are many connected clients.
 
#
 
# When dynamic HZ is enabled, the actual configured HZ will be used as
 
# as a baseline, but multiples of the configured HZ value will be actually
 
# used as needed once more clients are connected. In this way an idle
 
# instance will use very little CPU time while a busy instance will be
 
# more responsive.
 
dynamic-hz yes
 
 
 
# When a child rewrites the AOF file, if the following option is enabled
 
# the file will be fsync-ed every 32 MB of data generated. This is useful
 
# in order to commit the file to the disk more incrementally and avoid
 
# big latency spikes.
 
aof-rewrite-incremental-fsync yes
 
 
 
# When redis saves RDB file, if the following option is enabled
 
# the file will be fsync-ed every 32 MB of data generated. This is useful
 
# in order to commit the file to the disk more incrementally and avoid
 
# big latency spikes.
 
rdb-save-incremental-fsync yes
 
 
 
# Redis LFU eviction (see maxmemory setting) can be tuned. However it is a good
 
# idea to start with the default settings and only change them after investigating
 
# how to improve the performances and how the keys LFU change over time, which
 
# is possible to inspect via the OBJECT FREQ command.
 
#
 
# There are two tunable parameters in the Redis LFU implementation: the
 
# counter logarithm factor and the counter decay time. It is important to
 
# understand what the two parameters mean before changing them.
 
#
 
# The LFU counter is just 8 bits per key, it's maximum value is 255, so Redis
 
# uses a probabilistic increment with logarithmic behavior. Given the value
 
# of the old counter, when a key is accessed, the counter is incremented in
 
# this way:
 
#
 
# 1. A random number R between 0 and 1 is extracted.
 
# 2. A probability P is calculated as 1/(old_value*lfu_log_factor+1).
 
# 3. The counter is incremented only if R < P.
 
#
 
# The default lfu-log-factor is 10. This is a table of how the frequency
 
# counter changes with a different number of accesses with different
 
# logarithmic factors:
 
#
 
# +--------+------------+------------+------------+------------+------------+
 
# | factor | 100 hits   | 1000 hits  | 100K hits  | 1M hits    | 10M hits   |
 
# +--------+------------+------------+------------+------------+------------+
 
# | 0      | 104        | 255        | 255        | 255        | 255        |
 
# +--------+------------+------------+------------+------------+------------+
 
# | 1      | 18         | 49         | 255        | 255        | 255        |
 
# +--------+------------+------------+------------+------------+------------+
 
# | 10     | 10         | 18         | 142        | 255        | 255        |
 
# +--------+------------+------------+------------+------------+------------+
 
# | 100    | 8          | 11         | 49         | 143        | 255        |
 
# +--------+------------+------------+------------+------------+------------+
 
#
 
# NOTE: The above table was obtained by running the following commands:
 
#
 
#   redis-benchmark -n 1000000 incr foo
 
#   redis-cli object freq foo
 
#
 
# NOTE 2: The counter initial value is 5 in order to give new objects a chance
 
# to accumulate hits.
 
#
 
# The counter decay time is the time, in minutes, that must elapse in order
 
# for the key counter to be divided by two (or decremented if it has a value
 
# less <= 10).
 
#
 
# The default value for the lfu-decay-time is 1. A Special value of 0 means to
 
# decay the counter every time it happens to be scanned.
 
#
 
# lfu-log-factor 10
 
# lfu-decay-time 1
 
 
 
########################### ACTIVE DEFRAGMENTATION #######################
 
#
 
# WARNING THIS FEATURE IS EXPERIMENTAL. However it was stress tested
 
# even in production and manually tested by multiple engineers for some
 
# time.
 
#
 
# What is active defragmentation?
 
# -------------------------------
 
#
 
# Active (online) defragmentation allows a Redis server to compact the
 
# spaces left between small allocations and deallocations of data in memory,
 
# thus allowing to reclaim back memory.
 
#
 
# Fragmentation is a natural process that happens with every allocator (but
 
# less so with Jemalloc, fortunately) and certain workloads. Normally a server
 
# restart is needed in order to lower the fragmentation, or at least to flush
 
# away all the data and create it again. However thanks to this feature
 
# implemented by Oran Agra for Redis 4.0 this process can happen at runtime
 
# in an "hot" way, while the server is running.
 
#
 
# Basically when the fragmentation is over a certain level (see the
 
# configuration options below) Redis will start to create new copies of the
 
# values in contiguous memory regions by exploiting certain specific Jemalloc
 
# features (in order to understand if an allocation is causing fragmentation
 
# and to allocate it in a better place), and at the same time, will release the
 
# old copies of the data. This process, repeated incrementally for all the keys
 
# will cause the fragmentation to drop back to normal values.
 
#
 
# Important things to understand:
 
#
 
# 1. This feature is disabled by default, and only works if you compiled Redis
 
#    to use the copy of Jemalloc we ship with the source code of Redis.
 
#    This is the default with Linux builds.
 
#
 
# 2. You never need to enable this feature if you don't have fragmentation
 
#    issues.
 
#
 
# 3. Once you experience fragmentation, you can enable this feature when
 
#    needed with the command "CONFIG SET activedefrag yes".
 
#
 
# The configuration parameters are able to fine tune the behavior of the
 
# defragmentation process. If you are not sure about what they mean it is
 
# a good idea to leave the defaults untouched.
 
 
 
# Enabled active defragmentation
 
# activedefrag yes
 
 
 
# Minimum amount of fragmentation waste to start active defrag
 
# active-defrag-ignore-bytes 100mb
 
 
 
# Minimum percentage of fragmentation to start active defrag
 
# active-defrag-threshold-lower 10
 
 
 
# Maximum percentage of fragmentation at which we use maximum effort
 
# active-defrag-threshold-upper 100
 
 
 
# Minimal effort for defrag in CPU percentage
 
# active-defrag-cycle-min 5
 
 
 
# Maximal effort for defrag in CPU percentage
 
# active-defrag-cycle-max 75
 
 
 
# Maximum number of set/hash/zset/list fields that will be processed from
 
# the main dictionary scan
 
# active-defrag-max-scan-fields 1000