1.使用ripv2全网可达2保证更新安全 12之间使用明文 23之间使用密文3.r3的环回做汇总192.168.1.0/24 192.168.2.0/24 4.r1的环回不能宣告全网可达
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]
Nov 18 2022 16:34:33-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
[Huawei]sy
[Huawei]sysname r1
[r1]user-bind
[r1]user-group
[r1]user-interface c
[r1]user-interface console0
[r1-ui-console0]i
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]info-center
[r1]interface l
[r1]rip 1
[r1-rip-1]v
[r1-rip-1]verify-source
[r1-rip-1]version 2
[r1-rip-1]n
[r1-rip-1]quit
[r1]in
[r1]info-center
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip address 12.1.1.1 24
[r1-GigabitEthernet0/0/0]
Nov 18 2022 17:00:08-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]rip 1
[r1-rip-1]v
[r1-rip-1]verify-source
[r1-rip-1]version 2
[r1-rip-1]n
[r1-rip-1]n
[r1-rip-1]network 12.0.0.0
[r1-rip-1]net
[r1-rip-1]network 23.0.0.0
[r1-rip-1]n
[r1-rip-1]network 34.0.0.0
[r1-rip-1]quit
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r2
[r2]user-bind
[r2]user-group
[r2]user-interface c
[r2]user-interface console0
[r2-ui-console0]i
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]quit
[r2]in
[r2]info-center
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad
[r2-GigabitEthernet0/0/0]ip address 23.1.1.0