rip、ospf重发布选路

 实验要求：

1.左边rip右边ospf，每条路径为最优，并且都有备份。

2.1和4的环回为等开销负载均衡

1去3的环回选走下面，加大从G0/0/0口进来时的度量值

acl number 2000  
 rule 5 permit source 3.3.3.3 0 
interface GigabitEthernet0/0/0
 rip metricin 2000 3

1去34网段选走下面，在2上rip重发布ospf时不发布该网段

ip ip-prefix ii index 10 permit 34.1.1.0 24
route-policy nn deny node 10 
 if-match ip-prefix ii 
route-policy nn permit node 20 
import-route ospf 100 route-policy nn

1去24网段走上面，该网段从G0/0/1口进时不接收

ip ip-prefix xx index 10 deny 24.1.1.0 24
ip ip-prefix xx index 20 permit 0.0.0.0 0 less-equal 32
rip 1
filter-policy ip-prefix xx import GigabitEthernet0/0/1

1去2的环回走上面，在3上重发布时改大cost值

[R3]ip ip-prefix  uu permit 2.2.2.2 32
[R3]route-policy vv permit node 10
Info: New Sequence of this List.
[R3-route-policy]if-match ip-prefix uu
[R3-route-policy]apply cost 3
[R3]route-policy vv permit node 20
Info: New Sequence of this List.
[R3]rip 1
[R3-rip-1]import-route ospf 100 route-policy vv