搭建vsftpd服务

华为云搭建vsftp服务

适合于小白自学，一个简单的vsftpd文件关系服务系统的搭建，希望有助于你
上传图片比较麻烦，可以访问我的百度文库中上传的pdf文档，也可以进行下载（暂时还在审核，审核通过，附上网址，谢谢理解）

1、安装

yum -y install vsftpd

2、添加vsftpd用户

vsftpd安装后默认开启了匿名FTP的功能，使用匿名FTP，用户无需输入用户名密码即可登录FTP 服务器，但没有权限修改或上传文件。用户如果试图使用Linux操作系统中的账号登录服务器，将会被vsftpd拒绝，但可以在vsftpd里配置用户账号和密码登录。以下操作以在vsftpd 里配置用户账号和密码登录FTP服务器为例。

#创建用户
useradd ftp_user1
#为用户设置密码(123456)
passwd ftp_user1
#创建ftp使用的文件目录
mkdir /var/ftp/work_user1
#将创建的文件目录所有者改为用于登录FTP的本地用户
chown -R ftp_user1:ftp_user1 /var/ftp/work_user1

3、修改vsftpd.conf配置文件

vim /etc/vsftpd/vsftpd.conf

可根据实际需求选择将FTP配置为主动模式或者被动模式。如果华为云上的服务器需要通过公网IP地址访问华为云上的实例搭建的FTP服务器时，需要将FTP服务器配置为被动模式。

1.主动模式

#设置以下参数，不允许匿名登录FTP服务器，允许本地用户登录FTP服务器，并指定FTP本地用户使用的文件目录。
anonymous_enable=NO              #不允许匿名登录FTP服务器
local_enable=YES                 #允许本地用户登录FTP服务器
local_root=/var/ftp/work_user1     #FTP本地用户使用的文件目录

#设置以下参数，限制用户只能访问自身的主目录。
chroot_local_user=YES                      #所有用户都被限制在其主目录
chroot_list_enable=YES                     #启用例外用户名单
chroot_list_file=/etc/vsftpd/chroot_list   #例外用户名单
allow_writeable_chroot=YES                 

2.被动模式

被动模式除了需要配置主动模式所需的所有参数外，还需要配置的参数如下：

#设置以下参数，配置FTP支持被动模式。并指定FTP服务器的公网IP地址，以及可供访问的端口范围，端口范围请根据实际环境进行设置。
listen=YES                    
listen_ipv6=NO                
pasv_address=xx.xx.xx.xx      #FTP服务器的公网IP地址
           
pasv_min_port=3000            #被动模式下的最小端口
pasv_max_port=3100            #被动模式下的最大端口

4、创建chroot_list文件

touch /etc/vsftpd/chroot_list

“chroot_list”文件是限制在主目录下的例外用户名单。如果需要设置某个用户不受只可以访问其主目录的限制，可将对应的用户名写入该文件。如果没有例外也必须要有“chroot_list”文件，内容可为空。

5、重启服务

systemctl restart vsftpd

6、设置安全组的入向规则

入向规则这里不再讲解

7、防火墙和SELinux

1.使开机启动

systemctl enable vsftpd.service

2.开启端口

firewall-cmd --zone=public --add-port=21/tcp --permanent

3.删除端口

firewall-cmd --zone=public --remove-port=21/tcp --permanent

4.防火墙规则

# 查询端口是否开放
firewall-cmd --query-port=8080/tcp
# 开放80端口
firewall-cmd --permanent --add-port=80/tcp
firewall-cmd --permanent --add-port=8080-8085/tcp
# 移除端口
firewall-cmd --permanent --remove-port=8080/tcp
#查看防火墙的开放的端口
firewall-cmd --permanent --list-ports

#重启防火墙(修改配置后要重启防火墙)
firewall-cmd --reload


# 参数解释
#1、firwall-cmd：是Linux提供的操作firewall的一个工具；
#2、--permanent：表示设置为持久；
#3、--add-port：标识添加的端口；

8、测试

[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-Iw9hzdu1-1592634965911)(C:\Users\Entity-G\AppData\Roaming\Typora\typora-user-images\1592459680987.png)]

[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-KCuK8w0Y-1592634965924)(C:\Users\Entity-G\AppData\Roaming\Typora\typora-user-images\1592459719167.png)]

9、vsftp配置文件

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
#不允许匿名登录
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
# When SELinux is enforcing check for SE bool ftp_home_dir
#允许本地用户登录
local_enable=YES
#ftp本地用户使用的目录
local_root=/var/ftp/work_user1
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/xferlog
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode. The vsftpd.conf(5) man page explains
# the behaviour when these options are disabled.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
# 所有用户都被限制在主目录
chroot_local_user=YES
# 启动白名单
chroot_list_enable=YES
# (default follows)
# 白名单文件
chroot_list_file=/etc/vsftpd/chroot_list
#
allow_writeable_chroot=YES
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
# Make sure, that one of the listen options is commented !!
listen_ipv6=NO

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES

# 设置公网IP
pasv_address=121.37.159.124
# 被动模式下端口区间
pasv_max_port=65533
pasv_min_port=1024

h two configuration

files.

Make sure, that one of the listen options is commented !!

listen_ipv6=NO

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES

设置公网IP

pasv_address=121.37.159.124

被动模式下端口区间

pasv_max_port=65533
pasv_min_port=1024