linux-yum安装
当我们在liunx系统中安装某个软件时,经常会遇到一些软件的依赖问题。yum或者Yellow dog Update或者Modified是杜克大学为了提高RPM软件包安装性而开发的一种软件包管理器。Yum可以从众多软件包仓库中搜索软件的依赖关系,因此可以减少由于依赖关系带来的问题
自己测试:
本地仓库:
第一步:新建一个文件夹,并把光盘内的所有文件复制到这个文件夹里(也可以用挂载):
第二步:备份repodata文件。因为有四个文件夹里都有这个文件,所以都要备份(可以不用做)
第三步:安装工具包:# rpm -ivh /yum/Server/createrepo-0.4.11-3.el5.noarch.rpm
第四步:生成仓库数据库:在软件所在的文件夹下:createrepo . (createrepo -g/yum/Server/repodata.bak/comps-rhel5-server-core.xml /yum/Server/)
第五步:查看仓库数据文件:[root@localhost ~]# ls /yum/Server/repodata/
第六步:客户端配置: [root@localhost ~]# vi/etc/yum.repos.d/****.repo
baseurl=file:///yum/Server
enabled=1
gpgcheck=0
第七步:安装 yum install ***
第八步:清除一下yum安装时的缓存:[root@localhost ~]# yum clean all
网上仓库:baseurl=ftp://ftp.redhat.com/pub/redhat/linux/beta/$releasever/en/os/$basearch/Debuginfo/ --网上ftp
网上转载:
第一种方法:(推荐)
第一步:新建一个文件夹,并把光盘内的所有文件复制到这个文件夹里:
[root@localhost~]# mkdir /yum
[root@localhost~]# cp -rvf /misc/cd/* /yum
第二步:备份repodata文件。因为有四个文件夹里都有这个文件,所以都要备份。
[root@localhost~]# mv /yum/Server/repodata /yum/Server/repodata.bak
[root@localhost~]# mv /yum/VT/repodata /yum/VT/repodata.bak
[root@localhost~]# mv /yum/Cluster/repodata /yum/Cluster/repodata.bak
[root@localhost~]# mv /yum/ClusterStorage/repodata /yum/ClusterStorage/repodata.bak
第三步:安装工具包:
[root@localhost~]# rpm -ivh /yum/Server/createrepo-0.4.11-3.el5.noarch.rpm
第四步:生成仓库数据库:
[root@localhost~]# createrepo -g /yum/Server/repodata.bak/comps-rhel5-server-core.xml/yum/Server/
[root@localhost~]# createrepo -g /yum/VT/repodata.bak/comps-rhel5-vt.xml /yum/VT/
[root@localhost~]# createrepo -g /yum/Cluster/repodata.bak/ /yum/Cluster
[root@localhost~]# createrepo -g /yum/ClusterStorage/repodata.bak/comps-rhel5-cluster-st.xml/yum/ClusterStorage/
第五步:查看仓库数据文件:
[root@localhost~]# ls /yum/Server/repodata/
comps-rhel5-server-core.xml//这个文件软件包组的分类。
filelists.xml.gzother.xml.gz primary.xml.gz //这三个文件为软件包列表文件。
repomd.xml //这个文件为MD5校验信息。
在/yum/VT /yum/Cluster /yum/ClusterStorage下面都有这几个文件,作用和这一样。如果想更新软件包,只需把下载完的软件包放在Server或者其他三个目录里,再使用第四步重新生成数据库文件即可。
第六步:客户端配置:主要修改下面红色的部分:
[root@localhost~]# cp /etc/yum.repos.d/rhel-debuginfo.repo /etc/yum.repos.d/chenbin.repo
[root@localhost~]# vi /etc/yum.repos.d/chenbin.repo
[rhel-Server]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///yum/Server
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[rhel-VT]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///yum/VT
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[rhel-Cluster]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///yum/Cluster
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[rhel-ClusterStorage]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///yum/ClusterStorage
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
第七步:查看:如图,已经出现软件列表了。
如果把这里的勾去掉,再次打开就没有软件列表了,同时在/etc/yum.repos.d/chenbin.repo配置文件下的enabled=0。
清除一下yum安装时的缓存:
[root@localhost~]# yum clean all
安装一个软件试试:
[root@localhost~]# rpm -ivh /yum/Server/httpd-2.2.3-22.el5.i386.rpm
warning:/yum/Server/httpd-2.2.3-22.el5.i386.rpm:Header V3 DSA signature: NOKEY, key ID 37017186
error:Failed dependencies:
libapr-1.so.0 is needed by httpd-2.2.3-22.el5.i386
libaprutil-1.so.0 is needed by httpd-2.2.3-22.el5.i386
因为依赖关系,所以不能安装。用如下命令安装:
[root@localhost~]# yum install /yum/Server/httpd-2.2.3-22.el5.i386.rpm
系统会自动安装完成。Yum缷载如下:
[root@localhost~]# yum remove httpd。
第二种方法:
第一步:同上,创建一个新文件夹,并把光盘的内容全部复制到该文件夹内:
[root@localhost~]# mkdir /yum
[root@localhost~]# cp -rvf /misc/cd/* /yum
第二步:安装工具包:
[root@localhost~]# rpm -ivh /yum/Server/createrepo-0.4.11-3.el5.noarch.rpm
第三步:生成仓库数据库:
[root@localhost~]# cd /yum
[root@localhostyum]# createrepo . //注意后面的.
第四步:查看文件:文件作用同上:
[root@localhostyum]# ls /yum/repodata/
filelists.xml.gzother.xml.gz primary.xml.gz repomd.xml
第五步:客户端配置:
[root@localhost~]# cp /etc/yum.repos.d/rhel-debuginfo.repo /etc/yum.repos.d/chenbin.repo
[root@localhost~]# vi /etc/yum.repos.d/chenbin.repo
[rhel-chenbin]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///yum/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
清除yum安装时的缓存:
[root@localhost~]# yum clean all
至此,yum安装完成,但使用这种方法安装后在应用程序-添加删除软件的列表是空的,但使用yum安装软件是可以的。
[root@localhost~]# yum install /yum/Server/httpd-2.2.3-22.el5.i386.rpm
[root@localhost~]# yum remove httpd
第三种方法:
首先把光盘放入光驱内:
然后复制配置文件:
[root@localhost~]# cp /etc/yum.repos.d/rhel-debuginfo.repo /etc/yum.repos.d/chenbin.repo
最后编辑配置文件:
[root@localhost~]# vi /etc/yum.repos.d/chenbin.repo
[rhel-Server]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///misc/cd/Server
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[rhel-VT]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///misc/cd/VT
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[rhel-Cluster]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///misc/cd/Cluster
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[rhel-ClusterStorage]
name=RedHat Enterprise Linux $releasever - $basearch - Debug
baseurl=file:///misc/cd/ClusterStorage
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
清除缓存:
[root@localhost~]# yum clean all
这种方法安装后在应用程序-添加删除软件里也有列表。同样可以使用yum安装缷载
[root@localhost~]# yum install /misc/cd/Server/httpd-2.2.3-22.el5.i386.rpm
[root@localhost~]# yum remove httpd
如果把光盘拿出后,在应用程序-添加删除软件就没有列表了,只要放入光盘就有。
总结:YUM常用命令:
1.安装软件包:
yuminstall package
yumlocalinstall package 从本机目录安装软件包
yumgroupinstall group 安装某个组件的全部软件包
2.更新软件包:
yumupdate package
yumcheck-update 列出所有可更新的软件包
yumlist updates mysql* 查找mysql的更新
yumupdate 更新所有可更新的软件包
yumupdate mysql* 更新所有mysql的软件包
yumgroupupdate group 更新某个组件的所有软件包
yumlist 列出所有已安装和仓库中可用的软件包
yumlist available 列出仓库中所有可用的软件包
yumlist updates 列出仓库中比当前系统更新的软件包
yumlist installed 列出已安装的软件包
yumlist recent 列出新加入仓库的软件包
yuminfo 查询软件包信息
3.删除软件包:
yumremove package
yumgroupremove group 删除某个组件的全部软件包
4.清除软件包
yumclean packages 清除遗留在缓存里的包文件
yumclean metadata 清除遗留在缓存里的元数据
yumclean headers 清除遗留在缓存里的头文件
yumclean all 清除包文件,元数据,头文件
5.搜索软件包:
yumsearch package
yuminfo package 查找一个软件包的信息
yumlist package 列出包含指定信息的软件包
yumlist installed 列出已安装的软件包
yumlist extras 列出不是通过软件仓库安装的软件包
yumlist *ttp* 列出标题包含ttp的软件包
yumlist updates 列出可以更新的软件包
6.查找特定文件是由什么软件包提供的:
yumwhatprovides filename
例子:
yumwhatprovides httpd.conf
可用选项
–disalberepo=lib 禁用某个软件仓库
–enalberepo=lib 启用某个软件仓库
-C 禁用使用本机缓存的元数据
例子:
yum–disalberepo=livna|–enalberepo=livna installmplayer
yum-C info httpd