当在web.xml文件将.do后缀的请求交给org.springframework.web.servlet.DispatcherServlet后,还需要加载其他的配置文件
<!-- 配置DispatcherServlet -->
<servlet><servlet-name>DispatcherServlet</servlet-name>
<servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
<init-param>
<param-name>contextConfigLocation</param-name>
<param-value>
classpath:conf/spring-context.xml, classpath:conf/spring-mvc.xml, classpath:conf/spring-task.xml
自行定义Bean读取xml的名称
contextConfigLocation 你点进去前面的DispatcherServlet的源码,你就会发现他是这个类的一个属性.
classpath:只会到你的class路径中查找找文件; classpath*:不仅包含class路径,还包括jar文件中(class路径)进行查找.
</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>DispatcherServlet</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
web.xml的url映射的小知识:
<url-pattern>/</url-pattern> 会匹配到/login这样的路径型url,不会匹配到模式为*.jsp这样的后缀型url
<url-pattern>/*</url-pattern> 会匹配所有url:路径型的和后缀型的url(包括/login,*.jsp,*.js和*.html等)
<jsp-config>
<taglib>
<taglib-uri>http://java.sun.com/jsp/jstl/core_rt</taglib-uri>
<taglib-location>/WEB-INF/tld/c-rt.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>http://java.sun.com/jsp/jstl/fmt</taglib-uri>
<taglib-location>/WEB-INF/tld/fmt.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>http://java.sun.com/jsp/jstl/functions</taglib-uri>
<taglib-location>/WEB-INF/tld/fn.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>tools</taglib-uri>
<taglib-location>/WEB-INF/tld/tools.tld</taglib-location>
</taglib>
</jsp-config>
<!-- 配置session -->
<session-config>
<session-timeout>60</session-timeout>
</session-config>
<context-param>的作用:
1.启动一个WEB项目的时候,容器(如:Tomcat)会去读它的配置文件web.xml.读两个节点: <listener></listener> 和 <context-param></context-param>
2.紧接着,容器创建一个ServletContext(上下文),这个WEB项目所有部分都将共享这个上下文.
3.容器将<context-param></context-param>转化为键值对,并交给ServletContext.
4.容器创建<listener></listener>中的类实例,即创建监听.
5.在监听中会有contextInitialized(ServletContextEvent args)初始化方法,在这个方法中获得
ServletContext = ServletContextEvent.getServletContext();
context-param的值 = ServletContext.getInitParameter("context-param的键");
6.得到这个context-param的值之后,你就可以做一些操作了.注意,这个时候你的WEB项目还没有完全启动完成.这个动作会比所有的Servlet都要早.
换句话说,这个时候,你对<context-param>中的键值做的操作,将在你的WEB项目完全启动之前被执行.
7.举例.你可能想在项目启动之前就打开数据库.
那么这里就可以在<context-param>中设置数据库的连接方式,在监听类中初始化数据库的连接.
8.这个监听是自己写的一个类,除了初始化方法,它还有销毁方法.用于关闭应用前释放资源.比如说数据库连接的关闭.
web.xml的配置中<context-param>配置作用
1. 启动一个WEB项目的时候,容器(如:Tomcat)会去读它的配置文件web.xml.读两个节点:<listener></listener>和<context-param></context-param>
2.紧接着,容器创建一个ServletContext(上下文),这个WEB项目所有部分都将共享这个上下文.
3.容器将<context-param></context-param>转化为键值对,并交给ServletContext.
4.容器创建<listener></listener>中的类实例,即创建监听.
5.在监听中会有contextInitialized(ServletContextEventargs)初始化方法,在这个方法中获得ServletContext =ServletContextEvent.getServletContext();
context-param的值 =ServletContext.getInitParameter("context-param的键");
6.得到这个context-param的值之后,你就可以做一些操作了.注意,这个时候你的WEB项目还没有完全启动完成.这个动作会比所有的Servlet都要早.
换句话说,这个时候,你对<context-param>中的键值做的操作,将在你的WEB项目完全启动之前被执行.
7.举例.你可能想在项目启动之前就打开数据库.
那么这里就可以在<context-param>中设置数据库的连接方式,在监听类中初始化数据库的连接.
8.这个监听是自己写的一个类,除了初始化方法,它还有销毁方法.用于关闭应用前释放资源.比如说数据库连接的关闭.
如:
<!-- 加载spring的配置文件 -->
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/applicationContext.xml,/WEB-INF/action-servlet.xml,/WEB-
INF/jason-servlet.xml</param-value>
</context-param>
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
又如: --->自定义context-param,且自定义listener来获取这些信息
<context-param>
<param-name>urlrewrite</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>cluster</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>servletmapping</param-name>
<param-value>*.bbscs</param-value>
</context-param>
<context-param>
<param-name>poststoragemode</param-name>
<param-value>1</param-value>
</context-param>
<listener>
<listener-class>com.laoer.bbscs.web.servlet.SysListener</listener-class>
</listener>
publicclass SysListenerextends HttpServlet implements ServletContextListener {
privatestatic final Log logger = LogFactory.getLog(SysListener.class);
publicvoidcontextDestroyed(ServletContextEventsce) {
//用于在容器关闭时,操作
}
//用于在容器开启时,操作
publicvoidcontextInitialized(ServletContextEventsce) {
String rootpath = sce.getServletContext().getRealPath("/");
System.out.println("-------------rootPath:"+rootpath);
if (rootpath != null) {
rootpath = rootpath.replaceAll("\\\\","/");
} else {
rootpath = "/";
}
if (!rootpath.endsWith("/")) {
rootpath = rootpath + "/";
}
Constant.ROOTPATH = rootpath;
logger.info("Application Run Path:" + rootpath);
String urlrewrtie = sce.getServletContext().getInitParameter("urlrewrite");
boolean burlrewrtie = false;
if (urlrewrtie != null) {
burlrewrtie = Boolean.parseBoolean(urlrewrtie);
}
Constant.USE_URL_REWRITE = burlrewrtie;
logger.info("Use Urlrewrite:" + burlrewrtie);
其它略之....
}
}
/*最终输出
-------------rootPath:D:\tomcat_bbs\webapps\BBSCS_8_0_3\
2009-06-09 21:51:46,526[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
ApplicationRun Path:D:/tomcat_bbs/webapps/BBSCS_8_0_3/
2009-06-09 21:51:46,526[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
UseUrlrewrite:true
2009-06-09 21:51:46,526 [com.laoer.bbscs.web.servlet.SysListener]-[INFO]
UseCluster:false
2009-06-09 21:51:46,526[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
SERVLETMAPPING:*.bbscs
2009-06-09 21:51:46,573[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
PostStorage Mode:1
*/
context-param和init-param区别
web.xml里面可以定义两种参数:
(1)application范围内的参数,存放在servletcontext中,在web.xml中配置如下:
<context-param>
<param-name>context/param</param-name>
<param-value>avalible during application</param-value>
</context-param>
(2)servlet范围内的参数,只能在servlet的init()方法中取得,在web.xml中配置如下:
<servlet>
<servlet-name>MainServlet</servlet-name>
<servlet-class>com.wes.controller.MainServlet</servlet-class>
<init-param>
<param-name>param1</param-name>
<param-value>avalible in servletinit()</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
在servlet中可以通过代码分别取用:
package com.wes.controller;
importjavax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
publicclass MainServlet extends HttpServlet ...{
public MainServlet() ...{
super();
}
public void init() throws ServletException ...{
System.out.println("下面的两个参数param1是在servlet中存放的");
System.out.println(this.getInitParameter("param1"));
System.out.println("下面的参数是存放在servletcontext中的");
System.out.println(getServletContext().getInitParameter("context/param"));
}
}
第一种参数在servlet里面可以通过getServletContext().getInitParameter("context/param")得到
第二种参数只能在servlet的init()方法中通过this.getInitParameter("param1")取得.
一,servlet容器对url的匹配过程:
当 一个请求发送到servlet容器的时候,容器先会将请求的url减去当前应用上下文的路径作为servlet的映射url,比如我访问的是 http://localhost/test/aaa.html,我的应用上下文是test,容器会将http://localhost/test去掉, 剩下的/aaa.html部分拿来做servlet的映射匹配。这个映射匹配过程是有顺序的,而且当有一个servlet匹配成功以后,就不会去理会剩下 的servlet了(filter不同,后文会提到)。其匹配规则和顺序如下:
1. 精确路径匹配。例子:比如servletA 的url-pattern为 /test,servletB的url-pattern为 /* ,这个时候,如果我访问的url为http://localhost/test ,这个时候容器就会先进行精确路径匹配,发现/test正好被servletA精确匹配,那么就去调用servletA,也不会去理会其他的 servlet了。
2. 最长路径匹配。例子:servletA的url-pattern为/test/*,而servletB的url-pattern为/test/a/*,此 时访问http://localhost/test/a时,容器会选择路径最长的servlet来匹配,也就是这里的servletB。
3. 扩展匹配,如果url最后一段包含扩展,容器将会根据扩展选择合适的servlet。例子:servletA的url-pattern:*.action
4. 如果前面三条规则都没有找到一个servlet,容器会根据url选择对应的请求资源。如果应用定义了一个default servlet,则容器会将请求丢给default servlet(什么是default servlet?后面会讲)。
根据这个规则表,就能很清楚的知道servlet的匹配过程,所以定义servlet的时候也要考虑url-pattern的写法,以免出错。
对于filter,不会像servlet那样只匹配一个servlet,因为filter的集合是一个链,所以只会有处理的顺序不同,而不会出现只选择一 个filter。Filter的处理顺序和filter-mapping在web.xml中定义的顺序相同。
二,url-pattern详解
在web.xml文件中,以下语法用于定义映射:
l. 以”/’开头和以”/*”结尾的是用来做路径映射的。
2. 以前缀”*.”开头的是用来做扩展映射的。
3. “/” 是用来定义default servlet映射的。
4. 剩下的都是用来定义详细映射的。比如: /aa/bb/cc.action
所以,为什么定义”/*.action”这样一个看起来很正常的匹配会错?因为这个匹配即属于路径映射,也属于扩展映射,导致容器无法判断。
<context-param>的作用:
1.启动一个WEB项目的时候,容器(如:Tomcat)会去读它的配置文件web.xml.读两个节点: <listener></listener> 和 <context-param></context-param>
2.紧接着,容器创建一个ServletContext(上下文),这个WEB项目所有部分都将共享这个上下文.
3.容器将<context-param></context-param>转化为键值对,并交给ServletContext.
4.容器创建<listener></listener>中的类实例,即创建监听.
5.在监听中会有contextInitialized(ServletContextEvent args)初始化方法,在这个方法中获得
ServletContext = ServletContextEvent.getServletContext();
context-param的值 = ServletContext.getInitParameter("context-param的键");
6.得到这个context-param的值之后,你就可以做一些操作了.注意,这个时候你的WEB项目还没有完全启动完成.这个动作会比所有的Servlet都要早.
换句话说,这个时候,你对<context-param>中的键值做的操作,将在你的WEB项目完全启动之前被执行.
7.举例.你可能想在项目启动之前就打开数据库.
那么这里就可以在<context-param>中设置数据库的连接方式,在监听类中初始化数据库的连接.
8.这个监听是自己写的一个类,除了初始化方法,它还有销毁方法.用于关闭应用前释放资源.比如说数据库连接的关闭.
web.xml的配置中<context-param>配置作用
1. 启动一个WEB项目的时候,容器(如:Tomcat)会去读它的配置文件web.xml.读两个节点:<listener></listener>和<context-param></context-param>
2.紧接着,容器创建一个ServletContext(上下文),这个WEB项目所有部分都将共享这个上下文.
3.容器将<context-param></context-param>转化为键值对,并交给ServletContext.
4.容器创建<listener></listener>中的类实例,即创建监听.
5.在监听中会有contextInitialized(ServletContextEventargs)初始化方法,在这个方法中获得ServletContext =ServletContextEvent.getServletContext();
context-param的值 =ServletContext.getInitParameter("context-param的键");
6.得到这个context-param的值之后,你就可以做一些操作了.注意,这个时候你的WEB项目还没有完全启动完成.这个动作会比所有的Servlet都要早.
换句话说,这个时候,你对<context-param>中的键值做的操作,将在你的WEB项目完全启动之前被执行.
7.举例.你可能想在项目启动之前就打开数据库.
那么这里就可以在<context-param>中设置数据库的连接方式,在监听类中初始化数据库的连接.
8.这个监听是自己写的一个类,除了初始化方法,它还有销毁方法.用于关闭应用前释放资源.比如说数据库连接的关闭.
如:
<!-- 加载spring的配置文件 -->
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>/WEB-INF/applicationContext.xml,/WEB-INF/action-servlet.xml,/WEB-
INF/jason-servlet.xml</param-value>
</context-param>
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
又如: --->自定义context-param,且自定义listener来获取这些信息
<context-param>
<param-name>urlrewrite</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>cluster</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>servletmapping</param-name>
<param-value>*.bbscs</param-value>
</context-param>
<context-param>
<param-name>poststoragemode</param-name>
<param-value>1</param-value>
</context-param>
<listener>
<listener-class>com.laoer.bbscs.web.servlet.SysListener</listener-class>
</listener>
publicclass SysListenerextends HttpServlet implements ServletContextListener {
privatestatic final Log logger = LogFactory.getLog(SysListener.class);
publicvoidcontextDestroyed(ServletContextEventsce) {
//用于在容器关闭时,操作
}
//用于在容器开启时,操作
publicvoidcontextInitialized(ServletContextEventsce) {
String rootpath = sce.getServletContext().getRealPath("/");
System.out.println("-------------rootPath:"+rootpath);
if (rootpath != null) {
rootpath = rootpath.replaceAll("\\\\","/");
} else {
rootpath = "/";
}
if (!rootpath.endsWith("/")) {
rootpath = rootpath + "/";
}
Constant.ROOTPATH = rootpath;
logger.info("Application Run Path:" + rootpath);
String urlrewrtie = sce.getServletContext().getInitParameter("urlrewrite");
boolean burlrewrtie = false;
if (urlrewrtie != null) {
burlrewrtie = Boolean.parseBoolean(urlrewrtie);
}
Constant.USE_URL_REWRITE = burlrewrtie;
logger.info("Use Urlrewrite:" + burlrewrtie);
其它略之....
}
}
/*最终输出
-------------rootPath:D:\tomcat_bbs\webapps\BBSCS_8_0_3\
2009-06-09 21:51:46,526[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
ApplicationRun Path:D:/tomcat_bbs/webapps/BBSCS_8_0_3/
2009-06-09 21:51:46,526[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
UseUrlrewrite:true
2009-06-09 21:51:46,526 [com.laoer.bbscs.web.servlet.SysListener]-[INFO]
UseCluster:false
2009-06-09 21:51:46,526[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
SERVLETMAPPING:*.bbscs
2009-06-09 21:51:46,573[com.laoer.bbscs.web.servlet.SysListener]-[INFO]
PostStorage Mode:1
*/
context-param和init-param区别
web.xml里面可以定义两种参数:
(1)application范围内的参数,存放在servletcontext中,在web.xml中配置如下:
<context-param>
<param-name>context/param</param-name>
<param-value>avalible during application</param-value>
</context-param>
(2)servlet范围内的参数,只能在servlet的init()方法中取得,在web.xml中配置如下:
<servlet>
<servlet-name>MainServlet</servlet-name>
<servlet-class>com.wes.controller.MainServlet</servlet-class>
<init-param>
<param-name>param1</param-name>
<param-value>avalible in servletinit()</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
在servlet中可以通过代码分别取用:
package com.wes.controller;
importjavax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
publicclass MainServlet extends HttpServlet ...{
public MainServlet() ...{
super();
}
public void init() throws ServletException ...{
System.out.println("下面的两个参数param1是在servlet中存放的");
System.out.println(this.getInitParameter("param1"));
System.out.println("下面的参数是存放在servletcontext中的");
System.out.println(getServletContext().getInitParameter("context/param"));
}
}
第一种参数在servlet里面可以通过getServletContext().getInitParameter("context/param")得到
第二种参数只能在servlet的init()方法中通过this.getInitParameter("param1")取得.