Linux: cut command

About cut

Remove or “cut out” sections of each line of a file or files.

---

cut command Syntax

cut OPTION... [FILE]...

---

cut command options

-b, --bytes=LIST    Select only the bytes specified in LIST.
-c, --characters=LIST   Select only the characters specified in LIST
-d, --delimiter=DELIM   use DELIM instead of a tab for the field delimiter
-f, --fields=LIST   select only these fields; also print any line that contains no delimiter character, unless the -s option is specified
-n          This option is ignored, but is included for compatibility reasons.
--complement        complement the set of selected bytes, characters or fields.
-s, --only-delimited    do not print lines not containing delimiters.
--output-delimiter=STRING   use STRING as the output delimiter string. The default is to use the input delimiter.
--help          Display a help message and exit.
--version       output version information and exit.

Usage Notes:
When invoking cut, use the -b, -c, or -f option, but only one of them.
Each LIST is made up of a range, or multiple ranges separated by commas. Selected input is written in the same order that it is read, and is written to output exactly once.
Each range is one of:

N   the Nth byte, character, or field, counted from 1.
N-  from the Nth byte, character, or field, to the end of the line.
N-M from the Nth to the Mth byte, character, or field (inclusive).
-M  from the first to the Mth byte, character, or field.

If no FILE is specified, cut reads from the standard input.

---

Examples

For most of the example, we’ll be using the following test file.

$ cat test.txt
cat command for file oriented operations.
cp command for copy files or directories.
ls command to list out files and directories with its attributes.

Select Column of Characters

To extract only a desired column from a file use -c option. The following example displays 2nd character from each line of a file test.txt

$ cut -c2 test.txt
a
p
s

As seen above, the characters a, p, s are the second character from each line of the test.txt file.

---

Select Column of Characters using Range

Range of characters can also be extracted from a file by specifying start and end position delimited with -. The following example extracts first 3 characters of each line from a file called test.txt

$ cut -c1-3 test.txt
cat
cp
ls

---

Select Column of Characters using either Start or End Position

Either start position or end position can be passed to cut command with -c option.

The following specifies only the start position before the ‘-’. This example extracts from 3rd character to end of each line from test.txt file.

$ cut -c3- test.txt
t command for file oriented operations.
 command for copy files or directories.
 command to list out files and directories with its attributes.

The following specifies only the end position after the ‘-’. This example extracts 8 characters from the beginning of each line from test.txt file.

$ cut -c-8 test.txt
cat comm
cp comma
ls comma

The entire line would get printed when you don’t specify a number before or after the ‘-’ as shown below.

$ cut -c- test.txt
cat command for file oriented operations.
cp command for copy files or directories.
ls command to list out files and directories with its attributes.

---

Select a Specific Field from a File

Instead of selecting x number of characters, if you like to extract a whole field, you can combine option -f and -d. The option -f specifies which field you want to extract, and the option -d specifies what is the field delimiter that is used in the input file.

The following example displays only first field of each lines from /etc/passwd file using the field delimiter : (colon). In this case, the 1st field is the username. The file

$ cut -d':' -f1 /etc/passwd
root
daemon
bin
sys
sync
games
bala

---

Select Multiple Fields from a File

You can also extract more than one fields from a file or stdout. Below example displays username and home directory of users who has the login shell as “/bin/bash”.

$ grep "/bin/bash" /etc/passwd | cut -d':' -f1,6
root:/root
bala:/home/bala

To display the range of fields specify start field and end field as shown below. In this example, we are selecting field 1 through 4, 6 and 7

$ grep "/bin/bash" /etc/passwd | cut -d':' -f1-4,6,7
root:x:0:0:/root:/bin/bash
bala:x:1000:1000:/home/bala:/bin/bash

---

Select Fields Only When a Line Contains the Delimiter

In our /etc/passwd example, if you pass a different delimiter other than : (colon), cut will just display the whole line.

In the following example, we’ve specified the delimiter as | (pipe), and cut command simply displays the whole line, even when it doesn’t find any line that has | (pipe) as delimiter.

$ grep "/bin/bash" /etc/passwd | cut -d'|'  -f1
root:x:0:0:root:/root:/bin/bash
bala:x:1000:1000:bala,,,:/home/bala:/bin/bash

But, it is possible to filter and display only the lines that contains the specified delimiter using -s option.

The following example doesn’t display any output, as the cut command didn’t find any lines that has | (pipe) as delimiter in the /etc/passwd file.

$ grep "/bin/bash" /etc/passwd | cut -d'|' -s -f1

---

Select All Fields Except the Specified Fields

In order to complement the selection field list use option –complement.

The following example displays all the fields from /etc/passwd file except field 7

$ grep "/bin/bash" /etc/passwd | cut -d':' --complement -s -f7
root:x:0:0:root:/root
bala:x:1000:1000:bala,,,:/home/bala

---

Change Output Delimiter for Display

By default the output delimiter is same as input delimiter that we specify in the cut -d option.

To change the output delimiter use the option –output-delimiter as shown below. In this example, the input delimiter is : (colon), but the output delimiter is # (hash).

$ grep "/bin/bash" /etc/passwd | cut -d':'  -s -f1,6,7 --output-delimiter='#'
root#/root#/bin/bash
bala#/home/bala#/bin/bash

---

Change Output Delimiter to Newline

In this example, each and every field of the cut command output is displayed in a separate line. We still used –output-delimiter, but the value is $’\n’ which indicates that we should add a newline as the output delimiter.

$ grep bala /etc/passwd | cut -d':' -f1,6,7 --output-delimiter=$'\n'
bala
/home/bala
/bin/bash

---

Combine Cut with Other Unix Command Output

The power of cut command can be realized when you combine it with the stdout of some other Unix command.

Once you master the basic usage of cut command that we’ve explained above, you can wisely use cut command to solve lot of your text manipulation requirements.

The following example indicates how you can extract only useful information from the ps command output. We also showed how we’ve filtered the output of ps command using grep and sed before the final output was given to cut command. Here, we’ve used cut option -d and -f which we’ve explained in the above examples.

$ ps axu | grep python | sed 's/\s\+/ /g' | cut -d' ' -f2,11-
2231 /usr/bin/python /usr/lib/unity-lens-video/unity-lens-video
2311 /usr/bin/python /usr/lib/unity-scope-video-remote/unity-scope-video-remote
2414 /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon
2463 /usr/bin/python /usr/lib/system-service/system-service-d
3274 grep --color=auto python

---

Reference

http://www.thegeekstuff.com/2013/06/cut-command-examples/
http://www.computerhope.com/unix/ucut.htm