OK
U-Boot 1.3.4 (Mar 7 2016 - 11:55:20) for x210
CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 96MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: X210
DRAM: 512 MB
Flash: 8 MB
SD/MMC: 3728MB
*** Warning - using default environment
In: serial
Out: serial
Err: serial
[LEFT UP] boot mode
checking mode for fastboot ...
Hit any key to stop autoboot: 0
reading kernel.. 1073, 8192
MMC read: dev # 0, block # 1073, count 8192 ...8192 blocks read: OK
completed
reading RFS.. 9265, 6144
MMC read: dev # 0, block # 9265, count 6144 ...6144 blocks read: OK
completed
Boot with zImage
get_format
-------- 0 --------
Wrong Ramdisk Image Format
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.7 (lqm@lqm) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Mon Mar 7 11:59:31 CST 2016
[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: SMDKV210
[ 0.000000] @@@@@@@ atags_pointer not null
[ 0.000000] @@@@@@@linter#####boot_params:c0000100,mdesc->boot_params:40000002
[ 0.000000] Ignoring unrecognised tag 0x41001099
[ 0.000000] $$$$$$$$$cmdline:console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54000000
[ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_onenand: source is hclk_psys (0), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 24000000
[ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam0: source is xusbxti (1), rate is 12000000
[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 12000000
[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000
[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[ 0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000
[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[ 0.000000] sclk: source is sclk_a2m (0), rate is 100000000
[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
[ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30bfe000
[ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
[ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000
[ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000
[ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000
[ 0.000000] s5pv210: 25165824 bytes system memory reserved for jpeg at 0x45dab000
[ 0.000000] s5pv210: 4915200 bytes system memory reserved for fimd at 0x475ab000
[ 0.000000] s5pv210: 10485760 bytes system memory reserved for texstream at 0x47a5b000
[ 0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x4845b000
[ 0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x48794000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttySAC2,115200 root=/dev/mmcblk0p2 rw init=/linuxrc rootfstype=ext3
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 327744k/327744k available, 196544k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfc000000 ( 440 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
[ 0.000000] .text : 0xc0030000 - 0xc06e4000 (6864 kB)
[ 0.000000] .data : 0xc06e4000 - 0xc0731420 ( 310 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:393
[ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[ 0.000000] mult[140737]
[ 0.000000] max_delta_ns[2937815369]
[ 0.000000] min_delta_ns[30517]
[ 0.000000] rate[32768]
[ 0.000000] HZ[256]
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC2] enabled
[ 0.505072] Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
[ 0.590968] pid_max: default: 32768 minimum: 301
[ 0.595617] Mount-cache hash table entries: 512
[ 0.600346] Initializing cgroup subsys debug
[ 0.604327] Initializing cgroup subsys cpuacct
[ 0.608740] Initializing cgroup subsys freezer
[ 0.613181] CPU: Testing write buffer coherency: ok
[ 0.619957] regulator: core version 0.5
[ 0.622448] NET: Registered protocol family 16
[ 0.632048] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.636843] pmstats at 00000000
[ 0.639969] Open OV2655 camema sensor
[ 0.777351] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.783464] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.790999] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.798536] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[ 0.806083] smdkv210_nand_io_init
[ 0.809745] S5PV210: Initializing architecture
[ 0.814085] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[ 0.822216] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
[ 0.830616] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
[ 0.839107] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
[ 0.847717] regulator: pd_audio_supply: 5000 mV normal
[ 0.852876] regulator: pd_cam_supply: 5000 mV normal
[ 0.857889] regulator: pd_tv_supply: 5000 mV normal
[ 0.862822] regulator: pd_lcd_supply: 5000 mV normal
[ 0.867851] regulator: pd_g3d_supply: 5000 mV normal
[ 0.872875] regulator: pd_mfc_supply: 5000 mV normal
[ 0.883767] bio: create slab <bio-0> at 0
[ 0.886862] SCSI subsystem initialized
[ 0.890150] usbcore: registered new interface driver usbfs
[ 0.895552] usbcore: registered new interface driver hub
[ 0.900869] usbcore: registered new device driver usb
[ 0.906201] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.911416] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.916722] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.922228] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.928637] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[ 0.935765] cfg80211: Calling CRDA to update world regulatory domain
[ 0.942050] Switching to clocksource clock_source_systimer
[ 0.952363] NET: Registered protocol family 2
[ 0.955439] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.962858] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.969668] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[ 0.976408] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.982462] TCP reno registered
[ 0.985586] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.991495] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.997934] NET: Registered protocol family 1
[ 1.002366] RPC: Registered udp transport module.
[ 1.006817] RPC: Registered tcp transport module.
[ 1.011491] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.018052] PMU: registered new PMU device of type 0
[ 1.022880] wifi power management
[ 1.026371] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
[ 1.031810] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 1.037889] smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0
[ 1.044387] S5PV210 ADC driver, (c) 2010 Samsung Electronics
[ 1.050175] cpuidle: phy_regs_save:0x4fd7c000
[ 1.054605] input: s3c-button as /devices/virtual/input/input0
[ 1.060120] s3c button Initialized!!
[ 1.063785] Loaded driver for PL330 DMAC-0 s3c-pl330
[ 1.068612] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[ 1.074732] Loaded driver for PL330 DMAC-1 s3c-pl330
[ 1.079613] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.085750] Loaded driver for PL330 DMAC-2 s3c-pl330
[ 1.090613] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 1.103526] ashmem: initialized
[ 1.105792] NTFS driver 2.1.29 [Flags: R/W].
[ 1.109477] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.116498] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.120677] msgmni has been set to 640
[ 1.126856] alg: No test for stdrng (krng)
[ 1.129538] io scheduler noop registered
[ 1.133420] io scheduler deadline registered
[ 1.137642] io scheduler cfq registered (default)
[ 1.142991] s3cfb s3cfb: [fb2] dma: 0x475ab000, cpu: 0xe1000000, size: 0x004b0000
[ 1.153752] FIMD src sclk = 166750000
[ 1.155988] s3cfb s3cfb: registered successfully
[ 1.160543] Start display and show logo
[ 1.265124] x210 led driver
[ 1.332691] PA FB = 0x475AB000, bits per pixel = 32
[ 1.336128] screen width=1024 height=600 va=0xd75ab000 pa=0x475ab000
[ 1.342438] xres_virtual = 1024, yres_virtual = 1200, xoffset = 0, yoffset = 0
[ 1.349617] fb_size=4915200
[ 1.352398] Back frameBuffer[0].VAddr=d7803000 PAddr=47803000 size=2457600
[ 1.359576] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[ 1.367716] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[ 1.375782] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[ 1.383899] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[ 1.396200] brd: module loaded
[ 1.400000] loop: module loaded
[ 1.401735] pmem_gpu1: 1 init
[ 1.405037] Android kernel panic handler initialized (bind=kpanic)
[ 1.411227] S3C NAND Driver, (c) 2008 Samsung Electronics
[ 1.416262] Unknown NAND Device.
[ 1.419405] PPP generic driver version 2.4.2
[ 1.423799] PPP Deflate Compression module registered
[ 1.428635] PPP BSD Compression module registered
[ 1.434015] PPP MPPE Compression module registered
[ 1.438086] NET: Registered protocol family 24
[ 1.444065] dm9000 Ethernet Driver, V1.31
[ 1.447891] eth0: dm9000c at e08f4300,e08f8304 IRQ 42 MAC: 00:09:c0:ff:ec:48 (platform data)
[ 1.455080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.461652] s5p-ehci s5p-ehci: s5pv210 EHCI
[ 1.465693] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 1.472775] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[ 1.486470] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 1.490458] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.497158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.504352] usb usb1: Product: s5pv210 EHCI
[ 1.508501] usb usb1: Manufacturer: Linux 2.6.35.7 ehci_hcd
[ 1.514052] usb usb1: SerialNumber: s5pv210
[ 1.518645] hub 1-0:1.0: USB hub found
[ 1.521965] hub 1-0:1.0: 1 port detected
[ 1.526020] Initializing USB Mass Storage driver...
[ 1.530785] usbcore: registered new interface driver usb-storage
[ 1.536667] USB Mass Storage support registered.
[ 1.541520] mice: PS/2 mouse device common for all mice
[ 1.546779] S5P Touchscreen driver, (c) 2008 Samsung Electronics
[ 1.552539] s3c-ts s3c-ts: Created Median filter len:5 coords:2 dec_threshold:6
[ 1.559736] s3c-ts s3c-ts: Created Mean filter len:3 coords:2
[ 1.565480] s3c-ts s3c-ts: Created Linear filter coords:2
[ 1.570823] s3c-ts s3c-ts: Created zoom filter coords:2
[ 1.576014] s3c-ts s3c-ts: 4 filter(s) initialized
[ 1.580806] S5P TouchScreen got loaded successfully : 12 bits
[ 1.586658] input: S5P TouchScreen as /devices/virtual/input/input1
[ 1.593095] [GSLX680] Enter gslX680_ts_init
[ 1.597132] input: gslX680 as /devices/platform/s3c2440-i2c.1/i2c-1/1-0040/input/input2
[ 1.865393] usb 1-1: new high speed USB device using s5p-ehci and address 2
[ 1.999873] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.005111] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.012218] usb 1-1: Product: USB2.0 Hub
[ 2.016731] hub 1-1:1.0: USB hub found
[ 2.020127] hub 1-1:1.0: 4 ports detected
[ 4.233685] using rtc device, s3c, for alarms
[ 4.236690] i2c /dev entries driver
[ 4.240506] Linux video capture interface: v2.00
[ 4.244708] gspca: main v2.9.0 registered
[ 4.248751] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
[ 4.254823] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[ 4.254829]
[ 4.263413] S3C JPEG Driver, (c) 2007 Samsung Electronics
[ 4.268389] JPEG driver for S5PV210
[ 4.272446] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[ 4.278297] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
[ 4.284088] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
[ 4.290024] usbcore: registered new interface driver uvcvideo
[ 4.295244] USB Video Class driver (v0.1.0)
[ 4.301024] device-mapper: uevent: version 1.0.3
[ 4.306951] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 4.313995] cpuidle: using governor ladder
[ 4.318067] cpuidle: using governor menu
[ 4.321946] sdhci: Secure Digital Host Controller Interface driver
[ 4.328055] sdhci: Copyright(c) Pierre Ossman
[ 4.332496] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[ 4.339112] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
[ 4.345561] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[ 4.352480] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 4.359392] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[ 4.365930] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
[ 4.372514] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[ 4.449746] wifi power enabled
[ 4.451426] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 4.458401] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[ 4.464952] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
[ 4.471541] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[ 4.478398] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[ 4.485350] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[ 4.491904] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
[ 4.498488] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[ 4.505355] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[ 4.512898] usbcore: registered new interface driver hiddev
[ 4.517892] usbcore: registered new interface driver usbhid
[ 4.523341] usbhid: USB HID core driver
[ 4.528631] logger: created 64K log 'log_main'
[ 4.531741] logger: created 256K log 'log_events'
[ 4.536550] logger: created 64K log 'log_radio'
[ 4.540904] logger: created 64K log 'log_system'
[ 4.546608] No device for DAI WM8976 HiFi
[ 4.549417] s3c64xx_iis_dai_init:s3c64xx-i2s0
[ 4.553933] s3c64xx_iis_dev_probe:id0 !!!
[ 4.557803] s3c64xx_iis_dai_init:s3c64xx-i2s1
[ 4.562467] WM8976 Audio Codec 0.4wm8976_probe: i2c_master_send
[ 4.568218] wm8976_init
[ 4.610122] mmc0: new high speed MMC card at address 0001
[ 4.614273] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[ 4.618781] mmcblk0: p1 p2 p3 p4
[ 5.343735] s3c_idma_preallocate_buffer: VA-e0940000 PA-C0000000 163840bytes
[ 5.349843] s3c_preallocate_dma_buffer: VA-ff007000, PA-4FF40000, 131072bytes
[ 5.356673] asoc: WM8976 HiFi <-> s3c64xx-i2s0 mapping ok
[ 5.365417] ALSA device list:
[ 5.366902] #0: smdkc1000 (WM8976)
[ 5.370507] GACT probability NOT on
[ 5.373943] Mirror/redirect action on
[ 5.377580] u32 classifier
[ 5.380245] Actions configured
[ 5.383641] Netfilter messages via NETLINK v0.30.
[ 5.388379] nf_conntrack version 0.5.0 (5121 buckets, 20484 max)
[ 5.394465] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 5.401672] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 5.409554] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 5.416488] ctnetlink v0.93: registering with nfnetlink.
[ 5.421105] xt_time: kernel timezone is -0000
[ 5.427422] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.431356] arp_tables: (C) 2002 David S. Miller
[ 5.435925] TCP cubic registered
[ 5.439071] NET: Registered protocol family 10
[ 5.445259] lo: Disabled Privacy Extensions
[ 5.452642] Mobile IPv6
[ 5.453611] IPv6 over IPv4 tunneling driver
[ 5.459312] sit0: Disabled Privacy Extensions
[ 5.464990] ip6tnl0: Disabled Privacy Extensions
[ 5.469485] NET: Registered protocol family 17
[ 5.472589] NET: Registered protocol family 15
[ 5.477021] lib80211: common routines for IEEE802.11 drivers
[ 5.482688] ThumbEE CPU extension supported.
[ 5.486970] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[ 5.495053] regulator_init_complete: disabling pd_mfc_supply
[ 5.500134] regulator_init_complete: disabling pd_tv_supply
[ 5.505671] regulator_init_complete: disabling pd_cam_supply
[ 5.511459] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[ 5.517284] smdkc110-rtc smdkc110-rtc: hctosys: invalid date/time
[ 5.524800] FIMC0 registered successfully
[ 5.528618] FIMC1 registered successfully
[ 5.532604] FIMC2 registered successfully
[ 5.535373] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[ 5.542036] s5p-tvout s5p-tvout: hpd status is cable removed
[ 5.553075] DBUG_PORT must not use AFC!
[ 5.566059] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.572687] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 5.578696] Freeing init memory: 160K
[ 5.832423] EXT4-fs (mmcblk0p2): re-mounted. Opts: barrier=1,nodelalloc,data=ordered
Starting logging: OK
Starting mdev...
Initializing random number generator... done.
Starting network...
[ 6.853677] eth0: link down
[ 6.855179] ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.21.0) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Starting sshd: OK
Starting qttest...
hdmi_x210 start
connect::m_flagHWConnected() fail
=============== HDMI Audio =============
========= HDMI Mode & Color Space =======
= 1. HDMI(YCbCr) =
= 2. HDMI(RGB) [ 16.299726] EXT2-fs (mmcblk0p4): warning: mounting ext3 filesystem as ext2
=
=========== x210 HDMI Rseolution ========
= 4. 480P_60_16_9 (0x04000000) =
= 5. 480P_60_4_3 (0x05000000) =
= 6. 576P_50_16_9 (0x06000000) =
= 7. 576P_50_4_3 (0x07000000) =
= 8. 720P_60 (0x08000000) =
= 9. 720P_50 (0x09000000) =
= a. 1080P_60 (0x0a000000) =
= b. 1080P_50 (0x0b000000) =
= c. 1080I_60 (0x0c000000) =
= d. 1080I_50 (0x0d000000) =
= i. 1080P_30 (0x12000000) =
=========================================
Welcome to Buildroot
x210v3 login: Error opening mouse device '/dev/input/mouse2': No such file or directory
Welcome to Buildroot
x210v3 login: root
Password:
[root@x210v3 ~]#
[root@x210v3 ~]#
[root@x210v3 ~]#
[root@x210v3 ~]#
扫一扫
4798
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
