VS2013中对配置文件INI的操作

        //类的头文件中定义 CString m_strRadLedDan;变量

        GetModuleFileName(NULL, m_strRadLedDan.GetBuffer(MAX_PATH), MAX_PATH);

m_strRadLedDan.ReleaseBuffer();
m_strRadLedDan = m_strRadLedDan.Left(m_strRadLedDan.ReverseFind('\\') + 1);

m_strRadLedDan += "RadLed.ini";        //配置的INI文件名  在项目可执行文件的目录里（Debug/Release文件夹里）

        WritePrivateProfileString("AppName", “KeyName”,“KeyValue”, m_strRadLedDan);    //写入文件的组名，键名和键值,最后是写入文件的位置和文件名(“RadLed.ini”);写入格式如下

//[AppName]

//KeyName = KeyValue

        CString str;

        GetPrivateProfileString(“AppName”, “KeyName”, NULL, str.GetBuffer(20), 20, m_strRadLedDan);//其中得到的s字符串就是str，str 就是写入的KeyValue，也可以是数值；

｛//获得已知组名下的内容（键名和键值）

static TCHAR szBuf[20000];
memset(szBuf, 0, 20000);
static TCHAR szWork[20000];
memset(szWork, 0, 20000);
INT nNum = 0，index = 0;
INT nLen = 0;


nNum = ::GetPrivateProfileSection(_T("RIZHI"), szBuf, 20000, m_strCurPathRiZhi);//获得组名为“RIZHI”的键名键值的占用位数
nLen = _tcslen(szBuf);        //长度
TCHAR* p = szBuf;
while (nLen < nNum)        //获得的行数范围
{
_tcscpy(szWork, p);    //此处的szWork为所需内容 键名和键值
nLen = nLen + 1;
p = &szBuf[nLen];
nLen += _tcslen(p);
str.Format("%d", index);                     //得到的第几行给字符串str
m_rizhilist.InsertItem(index, str);        //输出到表中显示
str.Format(szWork);                            //得到的键名和键值给字符串str
m_rizhilist.SetItemText(index, 1, str);  //输出到表中显示
index++;                                             //下一行。。
}

｝

//例：

//写入.INI

void DAN_1::LED_WriteStatic(CString VALUE)        //写入第RAD组的第RADLed个的灯的状态值=Value；
{
CString str;
str.Format("RAD%d",RadLed);
switch (RAD)
{
case 1: WritePrivateProfileString("RAD_LED_ONE", str, VALUE, m_strRadLedDan);  break;
case 2: WritePrivateProfileString("RAD_LED_TWO", str, VALUE, m_strRadLedDan); break;
case 3: WritePrivateProfileString("RAD_LED_THREE", str, VALUE, m_strRadLedDan); break;
case 4: WritePrivateProfileString("RAD_LED_FOUR", str, VALUE,  m_strRadLedDan); break;
case 5: WritePrivateProfileString("RAD_LED_FIVE", str, VALUE,  m_strRadLedDan); break;
case 6: WritePrivateProfileString("RAD_LED_SIX", str, VALUE, m_strRadLedDan); break;
case 7: WritePrivateProfileString("RAD_LED_SEVEN", str, VALUE, m_strRadLedDan); break;
case 8: WritePrivateProfileString("RAD_LED_EIGHT", str, VALUE, m_strRadLedDan); break;
case 9: WritePrivateProfileString("RAD_LED_NINE", str, VALUE,  m_strRadLedDan); break;
case 10: WritePrivateProfileString("RAD_LED_TEN", str, VALUE,  m_strRadLedDan); break;
}
}

//读出.INI

void DAN_1::LED_Static(void)        //读第RAD组的100个LED的状态信号记忆显示
{
GetModuleFileName(NULL, m_strRadLedDan.GetBuffer(MAX_PATH), MAX_PATH);
m_strRadLedDan.ReleaseBuffer();
m_strRadLedDan = m_strRadLedDan.Left(m_strRadLedDan.ReverseFind('\\') + 1);
m_strRadLedDan += "RadLed.ini";
CString str,strV; //获得组的键名  RAD1--RAD100
CString GROUP; //获得组名 ONE -- TEN


switch (RAD)
{
case 1: GROUP = "RAD_LED_ONE"; break;
case 2: GROUP = "RAD_LED_TWO"; break;
case 3: GROUP = "RAD_LED_THREE";         break;
case 4: GROUP = "RAD_LED_FOUR"; break;
case 5: GROUP = "RAD_LED_FIVE"; break;
case 6: GROUP = "RAD_LED_SIX"; break;
case 7: GROUP = "RAD_LED_SEVEN";     break;
case 8: GROUP = "RAD_LED_EIGHT";         break;
case 9: GROUP = "RAD_LED_NINE"; break;
case 10:         GROUP = "RAD_LED_TEN"; break;
}


for (int i = 1; i <= 100;i++)
{
str.Format("RAD%d",i);
GetPrivateProfileString(GROUP, str, NULL, strV.GetBuffer(20), 20, m_strRadLedDan);
strV.ReleaseBuffer();
if (strV == "bb") m_value = m_hIconLedGreed; else if (strV == "cc") m_value = m_hIconLedYellow;

else if (strV == "dd") m_value = m_hIconLedBlue; else if (strV == "ee") m_value = m_hIconLedRed;

                 else m_value = m_hIconLedGray;

switch (i)
{
case 1: m_led1.SetIcon(m_value); break; case 2: m_led2.SetIcon(m_value); break;         case 3: m_led3.SetIcon(m_value); break; case 4: m_led4.SetIcon(m_value); break;         case 5: m_led5.SetIcon(m_value); break;
case 6: m_led6.SetIcon(m_value); break; case 7: m_led7.SetIcon(m_value); break;         case 8: m_led8.SetIcon(m_value); break; case 9: m_led9.SetIcon(m_value); break;         case 10: m_led10.SetIcon(m_value); break;
case 11: m_led11.SetIcon(m_value); break; case 12: m_led12.SetIcon(m_value); break; case 13: m_led13.SetIcon(m_value); break; case 14: m_led14.SetIcon(m_value); break; case 15: m_led15.SetIcon(m_value); break;
case 16: m_led16.SetIcon(m_value); break; case 17: m_led17.SetIcon(m_value); break; case 18: m_led18.SetIcon(m_value); break; case 19: m_led19.SetIcon(m_value); break; case 20: m_led20.SetIcon(m_value); break;
case 21: m_led21.SetIcon(m_value); break; case 22: m_led22.SetIcon(m_value); break; case 23: m_led23.SetIcon(m_value); break; case 24: m_led24.SetIcon(m_value); break; case 25: m_led25.SetIcon(m_value); break;
case 26: m_led26.SetIcon(m_value); break; case 27: m_led27.SetIcon(m_value); break; case 28: m_led28.SetIcon(m_value); break; case 29: m_led29.SetIcon(m_value); break; case 30: m_led30.SetIcon(m_value); break;
case 31: m_led31.SetIcon(m_value); break; case 32: m_led32.SetIcon(m_value); break; case 33: m_led33.SetIcon(m_value); break; case 34: m_led34.SetIcon(m_value); break; case 35: m_led35.SetIcon(m_value); break;
case 36: m_led36.SetIcon(m_value); break; case 37: m_led37.SetIcon(m_value); break; case 38: m_led38.SetIcon(m_value); break; case 39: m_led39.SetIcon(m_value); break; case 40: m_led40.SetIcon(m_value); break;
case 41: m_led41.SetIcon(m_value); break; case 42: m_led42.SetIcon(m_value); break; case 43: m_led43.SetIcon(m_value); break; case 44: m_led44.SetIcon(m_value); break; case 45: m_led45.SetIcon(m_value); break;
case 46: m_led46.SetIcon(m_value); break; case 47: m_led47.SetIcon(m_value); break; case 48: m_led48.SetIcon(m_value); break; case 49: m_led49.SetIcon(m_value); break; case 50: m_led50.SetIcon(m_value); break;

case 51: m_led51.SetIcon(m_value); break; case 52: m_led52.SetIcon(m_value); break; case 53: m_led53.SetIcon(m_value); break; case 54: m_led54.SetIcon(m_value); break; case 55: m_led55.SetIcon(m_value); break;
case 56: m_led56.SetIcon(m_value); break; case 57: m_led57.SetIcon(m_value); break; case 58: m_led58.SetIcon(m_value); break; case 59: m_led59.SetIcon(m_value); break; case 60: m_led60.SetIcon(m_value); break;
case 61: m_led61.SetIcon(m_value); break; case 62: m_led62.SetIcon(m_value); break; case 63: m_led63.SetIcon(m_value); break; case 64: m_led64.SetIcon(m_value); break; case 65: m_led65.SetIcon(m_value); break;
case 66: m_led66.SetIcon(m_value); break; case 67: m_led67.SetIcon(m_value); break; case 68: m_led68.SetIcon(m_value); break; case 69: m_led69.SetIcon(m_value); break; case 70: m_led70.SetIcon(m_value); break;
case 71: m_led71.SetIcon(m_value); break; case 72: m_led72.SetIcon(m_value); break; case 73: m_led73.SetIcon(m_value); break; case 74: m_led74.SetIcon(m_value); break; case 75: m_led75.SetIcon(m_value); break;
case 76: m_led76.SetIcon(m_value); break; case 77: m_led77.SetIcon(m_value); break; case 78: m_led78.SetIcon(m_value); break; case 79: m_led79.SetIcon(m_value); break; case 80: m_led80.SetIcon(m_value); break;
case 81: m_led81.SetIcon(m_value); break; case 82: m_led82.SetIcon(m_value); break; case 83: m_led83.SetIcon(m_value); break; case 84: m_led84.SetIcon(m_value); break; case 85: m_led85.SetIcon(m_value); break;
case 86: m_led86.SetIcon(m_value); break; case 87: m_led87.SetIcon(m_value); break; case 88: m_led88.SetIcon(m_value); break; case 89: m_led89.SetIcon(m_value); break; case 90: m_led90.SetIcon(m_value); break;
case 91: m_led91.SetIcon(m_value); break; case 92: m_led92.SetIcon(m_value); break; case 93: m_led93.SetIcon(m_value); break; case 94: m_led94.SetIcon(m_value); break; case 95: m_led95.SetIcon(m_value); break;
case 96: m_led96.SetIcon(m_value); break; case 97: m_led97.SetIcon(m_value); break; case 98: m_led98.SetIcon(m_value); break; case 99: m_led99.SetIcon(m_value); break; case 100: m_led100.SetIcon(m_value); break;
}
}
}