Stunnel 的配置和使用

Stunnel配置

server环境：Fedora14

client环境：mips

1. server config（/etc/stunnel/stunnel.conf）

   compression=zlib
   syslog=yes
   debug=7
   output=/var/log/stunnel.log
   setuid=root
   setgid=root
   pid=/var/run/stunnel.pid
   cert=/etc/stunnel/stunnel.pem
   key=/etc/stunnel/stunnel.pem
   client=no
   [squid]
   accept=8000
   connect=127.0.0.1:8080

   注意事项setuid需要有可以读写/var/run/stunnel.pid的权限
2. client 配置

   client=yes
   pid=/tmp/stunnel.pid
   debug=7
   foreground=no
   verify=0
   [squid]
   accept=127.0.0.1:9999
   connect=server-IP:8000

   
   
3. 问题1-->Failed to get compression methods
4. squid server的配置

   #
   # Recommended minimum configuration:
   #
   acl manager proto cache_object
   acl localhost src 127.0.0.1/32 ::1
   acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
   
   # Example rule allowing access from your local networks.
   # Adapt to list your (internal) IP networks from where browsing
   # should be allowed
   acl localnet src 10.0.0.0/8     # RFC1918 possible internal network
   acl localnet src 58.215.221.0/24        # RFC1918 possible internal network
   acl localnet src all    # RFC1918 possible internal network
   acl localnet src 96.44.170.0/24 # RFC1918 possible internal network
   acl localnet src 172.16.0.0/12  # RFC1918 possible internal network
   acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
   acl localnet src fc00::/7       # RFC 4193 local private network range
   acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines
   
   acl SSL_ports port 443
   acl Safe_ports port 80          # http
   acl Safe_ports port 21          # ftp
   acl Safe_ports port 443         # https
   acl Safe_ports port 70          # gopher
   acl Safe_ports port 210         # wais
   acl Safe_ports port 1025-65535  # unregistered ports
   acl Safe_ports port 280         # http-mgmt
   acl Safe_ports port 488         # gss-http
   acl Safe_ports port 591         # filemaker
   acl Safe_ports port 777         # multiling http
   acl CONNECT method CONNECT
   
   #
   # Recommended minimum Access Permission configuration:
   #
   # Only allow cachemgr access from localhost
   http_access allow manager localhost
   http_access deny manager
   
   # Deny requests to certain unsafe ports
   http_access deny !Safe_ports
   
   # Deny CONNECT to other than secure SSL ports
   http_access deny CONNECT !SSL_ports
   
   # We strongly recommend the following be uncommented to protect innocent
   # web applications running on the proxy server who think the only
   # one who can access services on "localhost" is a local user
   #http_access deny to_localhost
   
   #
   # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
   #
   
   # Example rule allowing access from your local networks.
   # Adapt localnet in the ACL section to list your (internal) IP networks
   # from where browsing should be allowed
   http_access allow localnet
   http_access allow localhost
   
   # And finally deny all other access to this proxy
   http_access allow all
   
   # Squid normally listens to port 3128
   http_port 8000
   
   # We recommend you to use at least the following line.
   hierarchy_stoplist cgi-bin ?
   
   # Uncomment and adjust the following to add a disk cache directory.
   #cache_dir ufs /var/spool/squid 100 16 256
   
   # Leave coredumps in the first cache dir
   coredump_dir /var/spool/squid
   
   # Add any of your own refresh_pattern entries above these.
   refresh_pattern ^ftp:           1440    20%     10080
   refresh_pattern ^gopher:        1440    0%      1440
   refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
   refresh_pattern .               0       20%     4320
   
   
   
   
   

5. 5