springIOC源码解析(五)

现在咱们来看一下ApplicationContext是怎么初始化容器的

ApplicationContext ctx = new ClassPathXmlApplicationContext("springioc.xml");
Engine engine2 = (Engine)ctx.getBean("engine");
System.out.println(engine2.getBrandName());
Car car2 = (Car)ctx.getBean("car");
car2.introduce();

进入ClassPathXmlApplicationContext的构造函数会发现最终进入了如下的重载构造函数,其中refresh()方法就是容器初始化的入口

public ClassPathXmlApplicationContext(String[] configLocations, boolean refresh, ApplicationContext parent)
            throws BeansException {

        super(parent);
        setConfigLocations(configLocations);
        if (refresh) {
            refresh();
        }
    }

refresh()方法如下

public void refresh() throws BeansException, IllegalStateException {
        synchronized (this.startupShutdownMonitor) {
            // Prepare this context for refreshing.
            prepareRefresh();

            // Tell the subclass to refresh the internal bean factory.
            ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory();

            // Prepare the bean factory for use in this context.
            prepareBeanFactory(beanFactory);

            try {
                // Allows post-processing of the bean factory in context subclasses.
                postProcessBeanFactory(beanFactory);

                // Invoke factory processors registered as beans in the context.
                invokeBeanFactoryPostProcessors(beanFactory);

                // Register bean processors that intercept bean creation.
                registerBeanPostProcessors(beanFactory);

                // Initialize message source for this context.
                initMessageSource();

                // Initialize event multicaster for this context.
                initApplicationEventMulticaster();

                // Initialize other special beans in specific context subclasses.
                onRefresh();

                // Check for listener beans and register them.
                registerListeners();

                // Instantiate all remaining (non-lazy-init) singletons.
                finishBeanFactoryInitialization(beanFactory);

                // Last step: publish corresponding event.
                finishRefresh();
            }

            catch (BeansException ex) {
                if (logger.isWarnEnabled()) {
                    logger.warn("Exception encountered during context initialization - " +
                            "cancelling refresh attempt: " + ex);
                }

                // Destroy already created singletons to avoid dangling resources.
                destroyBeans();

                // Reset 'active' flag.
                cancelRefresh(ex);

                // Propagate exception to caller.
                throw ex;
            }

            finally {
                // Reset common introspection caches in Spring's core, since we
                // might not ever need metadata for singleton beans anymore...
                resetCommonCaches();
            }
        }
    }

这里定义了IOC容器初始化的过程,使用了模板模式,首先咱们看第二行创建BeanFactory的过程

protected ConfigurableListableBeanFactory obtainFreshBeanFactory() {
        refreshBeanFactory();
        ConfigurableListableBeanFactory beanFactory = getBeanFactory();
        if (logger.isDebugEnabled()) {
            logger.debug("Bean factory for " + getDisplayName() + ": " + beanFactory);
        }
        return beanFactory;
    }

refreshBeanFactory()方法在AbstractRefreshableApplicationContext中实现,咱们接着进去看看

protected final void refreshBeanFactory() throws BeansException {
        if (hasBeanFactory()) {
            destroyBeans();
            closeBeanFactory();
        }
        try {
            DefaultListableBeanFactory beanFactory = createBeanFactory();
            beanFactory.setSerializationId(getId());
            customizeBeanFactory(beanFactory);
            loadBeanDefinitions(beanFactory);
            synchronized (this.beanFactoryMonitor) {
                this.beanFactory = beanFactory;
            }
        }
        catch (IOException ex) {
            throw new ApplicationContextException("I/O error parsing bean definition source for " + getDisplayName(), ex);
        }
    }

分析一下这里的逻辑:首先判断一下BeanFactory是否存在,如果存在则把已有的BeanFactory销毁掉(因为传入的refresh为true,即要重新加载);然后会创建一个用DefaultListableBeanFactory实现的BeanFactory;再然后通过loadBeanDefinitions()方法载入bean信息

---

这里是不是就和BeanFactory初始化容器很像了:在初始化BeanFactory之后载入bean

---

咱们接着看看如何载入bean,这里中间经过好几个跳转,最终实现如下

public int loadBeanDefinitions(String location, Set<Resource> actualResources) throws BeanDefinitionStoreException {
        ResourceLoader resourceLoader = getResourceLoader();
        if (resourceLoader == null) {
            throw new BeanDefinitionStoreException(
                    "Cannot import bean definitions from location [" + location + "]: no ResourceLoader available");
        }

        if (resourceLoader instanceof ResourcePatternResolver) {
            // Resource pattern matching available.
            try {
                Resource[] resources = ((ResourcePatternResolver) resourceLoader).getResources(location);
                int loadCount = loadBeanDefinitions(resources);
                if (actualResources != null) {
                    for (Resource resource : resources) {
                        actualResources.add(resource);
                    }
                }
                if (logger.isDebugEnabled()) {
                    logger.debug("Loaded " + loadCount + " bean definitions from location pattern [" + location + "]");
                }
                return loadCount;
            }
            catch (IOException ex) {
                throw new BeanDefinitionStoreException(
                        "Could not resolve bean definition resource pattern [" + location + "]", ex);
            }
        }
        else {
            // Can only load single resources by absolute URL.
            Resource resource = resourceLoader.getResource(location);
            int loadCount = loadBeanDefinitions(resource);
            if (actualResources != null) {
                actualResources.add(resource);
            }
            if (logger.isDebugEnabled()) {
                logger.debug("Loaded " + loadCount + " bean definitions from location [" + location + "]");
            }
            return loadCount;
        }
    }

loadBeanDefinitions()方法会跳到如下方法中

public int loadBeanDefinitions(EncodedResource encodedResource) throws BeanDefinitionStoreException {
        Assert.notNull(encodedResource, "EncodedResource must not be null");
        if (logger.isInfoEnabled()) {
            logger.info("Loading XML bean definitions from " + encodedResource.getResource());
        }

        Set<EncodedResource> currentResources = this.resourcesCurrentlyBeingLoaded.get();
        if (currentResources == null) {
            currentResources = new HashSet<EncodedResource>(4);
            this.resourcesCurrentlyBeingLoaded.set(currentResources);
        }
        if (!currentResources.add(encodedResource)) {
            throw new BeanDefinitionStoreException(
                    "Detected cyclic loading of " + encodedResource + " - check your import definitions!");
        }
        try {
            InputStream inputStream = encodedResource.getResource().getInputStream();
            try {
                InputSource inputSource = new InputSource(inputStream);
                if (encodedResource.getEncoding() != null) {
                    inputSource.setEncoding(encodedResource.getEncoding());
                }
                return doLoadBeanDefinitions(inputSource, encodedResource.getResource());
            }
            finally {
                inputStream.close();
            }
        }
        catch (IOException ex) {
            throw new BeanDefinitionStoreException(
                    "IOException parsing XML document from " + encodedResource.getResource(), ex);
        }
        finally {
            currentResources.remove(encodedResource);
            if (currentResources.isEmpty()) {
                this.resourcesCurrentlyBeingLoaded.remove();
            }
        }
    }

咱们再看try块中的doLoadBeanDefinitions()方法

protected int doLoadBeanDefinitions(InputSource inputSource, Resource resource)
            throws BeanDefinitionStoreException {
        try {
            Document doc = doLoadDocument(inputSource, resource);
            return registerBeanDefinitions(doc, resource);
        }
        catch (BeanDefinitionStoreException ex) {
            throw ex;
        }
        catch (SAXParseException ex) {
            throw new XmlBeanDefinitionStoreException(resource.getDescription(),
                    "Line " + ex.getLineNumber() + " in XML document from " + resource + " is invalid", ex);
        }
        catch (SAXException ex) {
            throw new XmlBeanDefinitionStoreException(resource.getDescription(),
                    "XML document from " + resource + " is invalid", ex);
        }
        catch (ParserConfigurationException ex) {
            throw new BeanDefinitionStoreException(resource.getDescription(),
                    "Parser configuration exception parsing XML from " + resource, ex);
        }
        catch (IOException ex) {
            throw new BeanDefinitionStoreException(resource.getDescription(),
                    "IOException parsing XML document from " + resource, ex);
        }
        catch (Throwable ex) {
            throw new BeanDefinitionStoreException(resource.getDescription(),
                    "Unexpected exception parsing XML document from " + resource, ex);
        }
    }

这里的逻辑很好理解,把Resource转成Document接口,这是解析XML的方式之一,解析XML之后进行bean注册
registerBeanDefinitions()方法经过跳转之后会进入如下方法

protected void doRegisterBeanDefinitions(Element root) {
        // Any nested <beans> elements will cause recursion in this method. In
        // order to propagate and preserve <beans> default-* attributes correctly,
        // keep track of the current (parent) delegate, which may be null. Create
        // the new (child) delegate with a reference to the parent for fallback purposes,
        // then ultimately reset this.delegate back to its original (parent) reference.
        // this behavior emulates a stack of delegates without actually necessitating one.
        BeanDefinitionParserDelegate parent = this.delegate;
        this.delegate = createDelegate(getReaderContext(), root, parent);

        if (this.delegate.isDefaultNamespace(root)) {
            String profileSpec = root.getAttribute(PROFILE_ATTRIBUTE);
            if (StringUtils.hasText(profileSpec)) {
                String[] specifiedProfiles = StringUtils.tokenizeToStringArray(
                        profileSpec, BeanDefinitionParserDelegate.MULTI_VALUE_ATTRIBUTE_DELIMITERS);
                if (!getReaderContext().getEnvironment().acceptsProfiles(specifiedProfiles)) {
                    if (logger.isInfoEnabled()) {
                        logger.info("Skipped XML bean definition file due to specified profiles [" + profileSpec +
                                "] not matching: " + getReaderContext().getResource());
                    }
                    return;
                }
            }
        }

        preProcessXml(root);
        parseBeanDefinitions(root, this.delegate);
        postProcessXml(root);

        this.delegate = parent;
    }

这些代码很眼熟有没有?没错,这就是BeanFactory加载bean的方法.所以接下来如何管理bean我就不继续往下看了,想了解的同学可以看看我前面的博客

OK,咱们回到容器初始化模板的地方,再说一个比较重要的方法finishBeanFactoryInitialization(),这个方法作用是什么呢?预知后事如何,且看下回分解