android adb 通过adb连接制定设备



（移植android OS 到 openwrt）

确保linux能够识别adb命令，请自行添加环境变量。

root@Ray:/home/floyd/adt-bundle-linux/sdk/platform-tools# ./adb devices -l
List of devices attached 
02a0251d               device usb:2-1.1

注，确保adb运行权限为root，否则

floyd@Ray:~/adt-bundle-linux/sdk/platform-tools$ ./adb devices -l
List of devices attached 
????????????           no permissions usb:2-1.1

且无法使用adb -s  device_id shell连接设备。

root@Ray:/home/floyd/adt-bundle-linux/sdk/platform-tools# ./adb -s 02a0251d shell
$ ls
acct                 init.goldfish.rc     sbin
cache                init.qcom.rc         sd-ext
config               init.qcom.sh         sdcard
d                    init.rc              sys
data                 init.target.rc       system
default.prop         mnt                  ueventd.goldfish.rc
dev                  persist              ueventd.rc
etc                  proc                 vendor
init                 root

如何连接开发板

adb connect 192.168.1.2:5555 #端口5555，192.168.1.2为开发板IP
adb shell #进入终端模式

adb的关闭与启动

root@Ray:/home/floyd/adt-bundle-linux/sdk/platform-tools# ./adb kill-server
root@Ray:/home/floyd/adt-bundle-linux/sdk/platform-tools# ./adb start-server

与设备之间文件的传输

adb push <本机文件目录> <设备文件目录>

adb pull <本机文件目录> <设备文件目录>

安装APK程序到设备

adb install <APK文件路径>

连接到Android设备后请求root权限，su，如果手机的话，注意在手机上允许root权限请求。

默认下apk软件安装到/data/app

adb命令启动Android程序

adb shell am start -n breakan.test/breakan.test.TestActivity

其中"breakan.test/breakan.test.TestActivity"中的"breakan.test"是程序的包名，"TestActivity"是程序Activity类的类名。

usage: am [subcommand] [options]

    start an Activity: am start [-D] [-W] <INTENT>
        -D: enable debugging
        -W: wait for launch to complete

    start a Service: am startservice <INTENT>

    send a broadcast Intent: am broadcast <INTENT>

    start an Instrumentation: am instrument [flags] <COMPONENT>
        -r: print raw results (otherwise decode REPORT_KEY_STREAMRESULT)
        -e <NAME> <VALUE>: set argument <NAME> to <VALUE>
        -p <FILE>: write profiling data to <FILE>
        -w: wait for instrumentation to finish before returning

    start profiling: am profile <PROCESS> start <FILE>
    stop profiling: am profile <PROCESS> stop

    <INTENT> specifications include these flags:
        [-a <ACTION>] [-d <DATA_URI>] [-t <MIME_TYPE>]
        [-c <CATEGORY> [-c <CATEGORY>] ...]
        [-e|--es <EXTRA_KEY> <EXTRA_STRING_VALUE> ...]
        [--esn <EXTRA_KEY> ...]
        [--ez <EXTRA_KEY> <EXTRA_BOOLEAN_VALUE> ...]
        [-e|--ei <EXTRA_KEY> <EXTRA_INT_VALUE> ...]
        [-n <COMPONENT>] [-f <FLAGS>]
        [--grant-read-uri-permission] [--grant-write-uri-permission]
        [--debug-log-resolution]
        [--activity-brought-to-front] [--activity-clear-top]
        [--activity-clear-when-task-reset] [--activity-exclude-from-recents]
        [--activity-launched-from-history] [--activity-multiple-task]
        [--activity-no-animation] [--activity-no-history]
        [--activity-no-user-action] [--activity-previous-is-top]
        [--activity-reorder-to-front] [--activity-reset-task-if-needed]
        [--activity-single-top]
        [--receiver-registered-only] [--receiver-replace-pending]
        [<URI>]