配置标准ACL

 步骤

实现此案例需要按照如下步骤进行。
步骤一：在R1上配置IP地址及静态路由

tarena-R1(config)#interface f0/0
tarena-R1(config-if)#ip address 192.168.0.1 255.255.255.0
tarena-R1(config-if)#no shutdown
tarena-R1(config-if)#interface f0/1
tarena-R1(config-if)#ip address 192.168.1.1 255.255.255.0
tarena-R1(config-if)#no shutdown
tarena-R1(config-if)#exit
tarena-R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2

步骤二：在R2上配置IP地址及静态路由

tarena-R2(config)#interface f0/0
tarena-R2(config-if)#ip address 192.168.1.2 255.255.255.0
tarena-R2(config-if)#no shutdown
tarena-R2(config-if)#interface f0/1
tarena-R2(config-if)#ip address 192.168.2.1 255.255.255.0
tarena-R2(config-if)#no shutdown
tarena-R2(config-if)#exit
tarena-R2(config)#ip route 192.168.0.0 255.255.255.0 192.168.1.1

步骤三：在R1和R2上检查路由表

tarena-R1#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-I