POJ - 1611 The Suspects(并查集)

Severe acute respiratory syndrome (SARS), an atypical pneumonia of unknown aetiology, was recognized as a global threat in mid-March 2003. To minimize transmission to others, the best strategy is to separate the suspects from others.
In the Not-Spreading-Your-Sickness University (NSYSU), there are many student groups. Students in the same group intercommunicate with each other frequently, and a student may join several groups. To prevent the possible transmissions of SARS, the NSYSU collects the member lists of all student groups, and makes the following rule in their standard operation procedure (SOP).
Once a member in a group is a suspect, all members in the group are suspects.
However, they find that it is not easy to identify all the suspects when a student is recognized as a suspect. Your job is to write a program which finds all the suspects.
Input
The input file contains several cases. Each test case begins with two integers n and m in a line, where n is the number of students, and m is the number of groups. You may assume that 0 < n <= 30000 and 0 <= m <= 500. Every student is numbered by a unique integer between 0 and n−1, and initially student 0 is recognized as a suspect in all the cases. This line is followed by m member lists of the groups, one line per group. Each line begins with an integer k by itself representing the number of members in the group. Following the number of members, there are k integers representing the students in this group. All the integers in a line are separated by at least one space.
A case with n = 0 and m = 0 indicates the end of the input, and need not be processed.
Output

For each case, output the number of suspects in one line.


题意:一个人感染,全团队都会感染,一开始0是感染的,问一共有多少人感染

思路:简答的并查集,把每个团队的人连起来就好了,然后扫一遍。


代码:

#include <cstdio>
#include <cmath>
#include <iostream>
#include <cstring>
#include <algorithm>
#include <queue>
#include <stack>
#include <vector>
#include <map>
#include <numeric>
#include <set>
#include <string>
#include <cctype>
#include <sstream>
#define INF 0x3f3f3f3f
#define lson l, m, rt<<1
#define rson m+1, r, rt<<1|1
using namespace std;
typedef long long LL;
typedef pair<LL, LL> P;
const int maxn = 3e4 + 5;
const int mod = 1e8 + 7;

int p[maxn];
void init(int n) {
    for (int i = 0; i < n; i++) p[i] = i;
}
int Find(int x) {
    return p[x] == x ? x : (p[x] = Find(p[x]));
}
bool same(int a, int b) {
    return Find(a) == Find(b);
}
void unite(int x, int y) {
    x = Find(x);
    y = Find(y);
    if (x != y) p[x] = y;
}
int n, m;
int main() {
    //freopen ("in.txt", "r", stdin);
    while (~scanf ("%d%d", &n, &m) && n) {
        init(n);
        int num;
        while (m--) {
            scanf ("%d", &num);
            int u, v;
            scanf ("%d", &u);
            for (int i = 1; i < num; i++) {
                scanf ("%d", &v);
                unite(u, v);
            }
        }
        int ans = 0;
        for (int i = 1; i < n; i++) {
            if (same(0, i)) ans++;
        }
        printf ("%d\n", ++ans);
    }
    return 0;
}





  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
自动控制节水灌溉技术的高低代表着农业现代化的发展状况,灌溉系统自动化水平较低是制约我国高效农业发展的主要原因。本文就此问题研究了单片机控制的滴灌节水灌溉系统,该系统可对不同土壤的湿度进行监控,并按照作物对土壤湿度的要求进行适时、适量灌水,其核心是单片机和PC机构成的控制部分,主要对土壤湿度与灌水量之间的关系、灌溉控制技术及设备系统的硬件、软件编程各个部分进行了深入的研究。 单片机控制部分采用上下位机的形式。下位机硬件部分选用AT89C51单片机为核心,主要由土壤湿度传感器,信号处理电路,显示电路,输出控制电路,故障报警电路等组成,软件选用汇编语言编程。上位机选用586型以上PC机,通过MAX232芯片实现同下位机的电平转换功能,上下位机之间通过串行通信方式进行数据的双向传输,软件选用VB高级编程语言以建立友好的人机界面。系统主要具有以下功能:可在PC机提供的人机对话界面上设置作物要求的土壤湿度相关参数;单片机可将土壤湿度传感器检测到的土壤湿度模拟量转换成数字量,显示于LED显示器上,同时单片机可采用串行通信方式将此湿度值传输到PC机上;PC机通过其内设程序计算出所需的灌水量和灌水时间,且显示于界面上,并将有关的灌水信息反馈给单片机,若需灌水,则单片机系统启动鸣音报警,发出灌水信号,并经放大驱动设备,开启电磁阀进行倒计时定时灌水,若不需灌水,即PC机上显示的灌水量和灌水时间均为0,系统不进行灌水。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值