点到点链路上的OSPF

配置R1

<Huawei>system-view 进入系统视图
[Huawei]undo info-center enable  关闭路由器输出信息
[Huawei]sysname R1  修改设备命名
[R1]interface s0/0/0  进入接口 s0/0/0
[R1-Serial0/0/0]ip address 192.168.12.1 24 配置IP地址和子网掩码
[R1-Serial0/0/0]undo shutdown  打开接口
[R1-Serial0/0/0]quit   退出
[R1]interface LoopBack 0  创建换回编号为0
[R1-LoopBack0]ip address 1.1.1.1 24  配置IP地址
[R1-LoopBack0]quit 退出
[R1]ospf router-id 1.1.1.1 OSPF的进程为1，router-id为1.1.1.1
[R1-ospf-1]area 0  进入区域0
[R1-ospf-1-area-0.0.0.0]network 192.168.12.0 0.0.0.255 //命令network192.168.12.0 0.0.0.255的作用为匹配192.168.12.0/24网段的IP地址
，并且将IP地址属于本网段的接口全部激活OSPF,在本列中也可以使用命令nrtwork 192.168.12.1 0.0.0.0,表示只是匹配192.168.12.1这一个IP地址，
而s0/0/0接口的IP地址为192.168.12.1 ，此时此接口激活OSPF
[R1-ospf-1-area-0.0.0.0]network 1.1.1.0 0.0.0.255  //通知网络1.1.1.0
[R1-ospf-1-area-0.0.0.0]quit
[R1]display ospf peer brief  查看OSPF的链路状态数据信息    
[R1]display ip routing-table   查看R1的路由表
[R1]display ospf interface s0/0/0  查看R1的接口状态

配置R2

<Huawei>system-view
[Huawei]undo info-center enable
[Huawei]sysname R2
[R2]interface s0/0/0
[R2-Serial0/0/0]ip address 192.168.23.2 24
[R2-Serial0/0/0]undo shutdown
Info: Interface Serial0/0/0 is not shutdown.
[R2-Serial0/0/0]quit
[R2]interface s0/0/1
[R2-Serial0/0/1]ip address 192.168.12.2 24
[R2-Serial0/0/1]undo shutdown
Info: Interface Serial0/0/1 is not shutdown.
[R2-Serial0/0/1]interface LoopBack 0
[R2-LoopBack0]ip address 2.2.2.2 24
[R2-LoopBack0]quit
[R2]ospf router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 192.168.12.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 192.168.23.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 2.2.2.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]quit

配置R3

<Huawei>system-view
[Huawei]undo info-center en
[Huawei]sysname R3
[R3]interface s0/0/1
[R3-Serial0/0/1]ip address 192.168.23.3 24
[R3-Serial0/0/1]undo shutdown
Info: Interface Serial0/0/1 is not shutdown.
[R3-Serial0/0/1]quit
[R3]interface LoopBack 0
[R3-LoopBack0]ip address 3.3.3.3 24
[R3-LoopBack0]quit
[R3]ospf router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 192.168.23.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 3.3.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]quit