VLAN实验报告

要求：划分VLAN，全网可达，电脑IP用DHCP获取

---

 步骤：  

1.创建VLAN

[Huawei]vlan 2

2.配置access链路（交换机与PC连接的链路为access链路

[sw1-GigabitEthernet0/0/2]port link-type access

[sw1-GigabitEthernet0/0/2]port default vlan 2

3.配置trunk干道（交换机和交换机，路由之间的链路称为trunk干道）

[sw1-GigabitEthernet0/0/1]port link-type trunk

[sw1-GigabitEthernet0/0/1]port trunk allow-pass vlan al

4.配置VLAN间路由

创建子接口[r1]int g 0/0/0.?

配置子接口管理的VLAN[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2

开启arp广播响应[r1-GigabitEthernet0/0/0.1]arp broadcast enable

为子接口配置IP[r1-GigabitEthernet0/0/0.1] ip address 192.168.1.1 24

开启DHCP[Huawei]dhcp enable

5.创建ip池[Huawei]ip pool aa

设置IP池网段，网关，DNS

[Huawei-ip-aa]network 192.168.1.0 mask 24

[Huawei-ip-aa]gateway-list 192.168.1.1

[Huawei-ip-aa]dns-list 114.114.114.114

6.选取全局配置

[Huawei-GigabitEthernet0/0/0.1]dhcp selcet global

7.测试是否成功