IPV6实验报告

一、实验拓扑

二、实验步骤

1、启用ipv6，自动获取ipv6地址

[Huawei]sysname PC3
[PC3]ipv6
[PC3]int g0/0/0    
[PC3-GigabitEthernet0/0/0]ipv6 enable    
[PC3-GigabitEthernet0/0/0]ipv6 add auto link-local 

     
[Huawei]sysname R1
[R1]ipv6
[R1]int g0/0/0  
[R1-GigabitEthernet0/0/0]ipv6 enable   
[R1-GigabitEthernet0/0/0]ipv6 add auto link-local 

2、查看接口配置指令

[PC3]display ipv6 interface brief 

[PC3]display ipv6 interface g0/0/0

[R1]display ipv6 interface brief

[R1]display ipv6 interface g0/0/0

3、测试R1和PC3是否联通

[PC3]ping ipv6 FE80::2E0:FCFF:FE84:6040 -i GigabitEthernet 0/0/0

[R1]ping ipv6 FE80::2E0:FCFF:FE07:6317 -i g0/0/0

4、测试交换机是否收到两边的mac地址

[SW2]display mac-address 

5、给R1和PC3配置全球单播地址2001：：/64

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ipv6 add 2001::1 64
[R1-GigabitEthernet0/0/0]quit
[R1]dis ipv6 int g0/0/0

[R1]ping ipv6 2001::1

[PC3]int g0/0/0
[PC3-GigabitEthernet0/0/0]ipv6 add 2001::3 64
[PC3-GigabitEthernet0/0/0]quit
[PC3]ping ipv6 2001::3  (公网地址的ping法)（全球单播地址）

6、给R3和R1配置全球单播地址，测试能不能全网通

[R1]int g0/0/1    
[R1-GigabitEthernet0/0/1]ipv6 enable 
[R1-GigabitEthernet0/0/1]ipv6 add 2002::1 64

[R3]ipv6
[R3]int g0/0/0    
[R3-GigabitEthernet0/0/0]ipv6 enable 
[R3-GigabitEthernet0/0/0]ipv6 add 2002::3 64

[PC3]ping ipv6 2002::3   （ping不通）

7、配置静态路由，实现全网通

[PC3]ipv6 route-static 2002:: 64 2001::1

[R3]ipv6 route-static 2001:: 64 2002::1
[PC3]ping ipv6 2002::3

[R3]ping ipv6 2001::3

[R3]ping ipv6 FE80::2E0:FCFF:FE07:6317 -i g0/0/0（ping不通）