笔记：NBU客户端安装

NBU 7.6 安装
需要开通的端口号
13722 13724 13782 1556 1521（监听使用的端口） 双向开通

6.5的安装需要安装2个 一个是client 另一个是oracle agent
对应的包为NetBackup_6_5_CLIENTS2.tar.gz 和 Netbackup_6_5_UnixOptions.tar.gz

7.5的只需要安装一个

安装client前 先修改/etc/hosts文件 双向开通端口

安装client后，执行/usr/openv/netbackup/bin/下的 oracle_link

修改bp.conf 为监听添加rman服务名（catalog连接使用） 添加备份服务器hosts文件中IP与主机名的对应关系

修改备份脚本

开启服务
1，开启服务xinetd 并在chkconfig中设置启动
2，执行dp.start_all开启client服务
3，使用netstat -an|grep 137查看端口是否启动

---

echo "kernel.sem=300  307200  32  1024">> /etc/sysctl.conf

解压后安装：

[root@nbu76 NetBackup_7.6.0.1_LinuxR_x86_64]# ./install


Symantec Installation Script
Copyright 1993 - 2013 Symantec Corporation, All Rights Reserved.


        Installing NetBackup Server Software


Please review the SYMANTEC SOFTWARE LICENSE AGREEMENT located on
the installation media before proceeding.  The agreement includes
details on the NetBackup Product Improvement Program.

For NetBackup installation and upgrade information specific to your
platform and to find out if your installed EEBs or hot fixes are
contained in this release, check out the Symantec Operations Readiness
Tools (SORT) Installation and Upgrade Checklist and Hot fix and EEB
Release Auditor, respectively, at https://sort.symantec.com/netbackup.

ATTENTION!  To help ensure a successful upgrade to NetBackup 7.6.0.1,
please visit the NetBackup 7.x Upgrade Portal:
http://www.symantec.com/docs/TECH74584.

Do you wish to continue? [y,n] (y) 


Participate in the NetBackup Product Improvement Program? [y,n] (y) 


Running preinstall checker...
ok nbdb_maintenance_space: no NBDB maintenance required on new install: skipping
ok nbdb_ntfs_dir_symlink: inapplicable on linux: skipping
ok nb_7601_hotfix_auditor: No potential for regression of hotfixes or EEBs was detected.

not ok ulimit_nofiles: nofiles ulimit 1024 is too low.
  NetBackup Master and Media Server processes may run slower if they are
  limited to fewer than 8000 open file descriptors.  This test runs
  'ulimit -n' and checks that the result is at least 8000 on NetBackup
  servers.  See
    https://www.symantec.com/docs/TECH75332
  for more information.

not ok semaphore_limits: too low:
  Performance of NetBackup Master and Media Servers can be affected
  adversely if the system is configured with low semaphore limits.  This
  test checks whether the current semaphore limits are high enough.  See
  https://www.symantec.com/docs/TECH203066 for details.
  
  The current SEMMNI setting is   128; at least  1024 is recommended.
  The current SEMMSL setting is   250; at least   300 is recommended.
  The current SEMMNS setting is 32000; at least 307200 is recommended.


WARNING: One or more non-critical preinstall checks have failed.

The NetBackup and Media Manager software is built for use on LINUX_RH_X86 hardware.
Do you want to install NetBackup and Media Manager files? [y,n] (y) 
NetBackup and Media Manager are normally installed in /usr/openv.
Is it OK to install in /usr/openv? [y,n] (y) 

File /tmp/install_trace.4339 contains a trace of this install.

安装前检查有失败，需要按提示修改：
1） nofiles ulimit 1024 is too low.
2） kernel-sem 的值太小

修改后重新执行install：

[root@nbu76 NetBackup_7.6.0.1_LinuxR_x86_64]# ./install


Symantec Installation Script
Copyright 1993 - 2013 Symantec Corporation, All Rights Reserved.


        Installing NetBackup Server Software


Please review the SYMANTEC SOFTWARE LICENSE AGREEMENT located on
the installation media before proceeding.  The agreement includes
details on the NetBackup Product Improvement Program.

For NetBackup installation and upgrade information specific to your
platform and to find out if your installed EEBs or hot fixes are
contained in this release, check out the Symantec Operations Readiness
Tools (SORT) Installation and Upgrade Checklist and Hot fix and EEB
Release Auditor, respectively, at https://sort.symantec.com/netbackup.

ATTENTION!  To help ensure a successful upgrade to NetBackup 7.6.0.1,
please visit the NetBackup 7.x Upgrade Portal:
http://www.symantec.com/docs/TECH74584.

Do you wish to continue? [y,n] (y) 

Participate in the NetBackup Product Improvement Program? [y,n] (y)  ----加入改进计划


Running preinstall checker...
ok nbdb_maintenance_space: no NBDB maintenance required on new install: skipping
ok nbdb_ntfs_dir_symlink: inapplicable on linux: skipping
ok nb_7601_hotfix_auditor: No potential for regression of hotfixes or EEBs was detected.

The NetBackup and Media Manager software is built for use on LINUX_RH_X86 hardware.
Do you want to install NetBackup and Media Manager files? [y,n] (y) y

NetBackup and Media Manager are normally installed in /usr/openv.
Is it OK to install in /usr/openv? [y,n] (y) ----安装目录

Saving server binaries for LINUX_RH_X86.



Reading NetBackup files from /root/NetBackup_7.6.0.1_LinuxR_x86_64/linuxR_x86/anb

Checking for pre-existing SYMCnetbp package.
Installing SYMCnetbp package.
Installation of SYMCnetbp was successful.
More details regarding SYMCnetbp can be found in file
/tmp/install_netbppkg_trace.4792 on nbu76.

openv/netbackup/client/Linux/
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/install_client
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/ftp_to_client
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/sftp_to_client
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/ssh_to_client
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/client_config
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/cp_to_client
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/extract_java
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/version
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/nbcheck
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/PBX.tar.gz
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/installpbx
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/tar
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/client_bin.tar.gz
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/.sizes_client_bin
openv/netbackup/client/Linux/IBMpSeriesRedHat2.6/.sizes
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/install_client
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/ftp_to_client
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/sftp_to_client
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/ssh_to_client
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/client_config
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/cp_to_client
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/extract_java
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/version
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/nbcheck
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/PBX.tar.gz
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/installpbx
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/tar
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/client_bin.tar.gz
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/.sizes_client_bin
openv/netbackup/client/Linux/IBMpSeriesSuSE2.6/.sizes
openv/netbackup/client/Linux/Debian2.6.18/
openv/netbackup/client/Linux/Debian2.6.18/nbj.conf
openv/netbackup/client/Linux/Debian2.6.18/install_client
openv/netbackup/client/Linux/Debian2.6.18/ftp_to_client
openv/netbackup/client/Linux/Debian2.6.18/sftp_to_client
openv/netbackup/client/Linux/Debian2.6.18/ssh_to_client
openv/netbackup/client/Linux/Debian2.6.18/client_config
openv/netbackup/client/Linux/Debian2.6.18/cp_to_client
openv/netbackup/client/Linux/Debian2.6.18/extract_java
openv/netbackup/client/Linux/Debian2.6.18/version
openv/netbackup/client/Linux/Debian2.6.18/pddeagent.tar.gz
openv/netbackup/client/Linux/Debian2.6.18/pdinstall
openv/netbackup/client/Linux/Debian2.6.18/nbcheck
openv/netbackup/client/Linux/Debian2.6.18/PBX.tar.gz
openv/netbackup/client/Linux/Debian2.6.18/installpbx
openv/netbackup/client/Linux/Debian2.6.18/tar
openv/netbackup/client/Linux/Debian2.6.18/client_bin.tar.gz
openv/netbackup/client/Linux/Debian2.6.18/.sizes_client_bin
openv/netbackup/client/Linux/Debian2.6.18/.sizes
openv/netbackup/client/Linux/Debian2.6.18/NB-Java.tar.gz
openv/netbackup/client/Linux/Debian2.6.18/.sizes_NB-Java
openv/netbackup/client/Linux/Debian2.6.18/JRE.tar.gz
openv/netbackup/client/Linux/Debian2.6.18/.sizes_JRE
openv/netbackup/client/Linux/RedHat2.6.18/
openv/netbackup/client/Linux/RedHat2.6.18/nbj.conf
openv/netbackup/client/Linux/RedHat2.6.18/install_client
openv/netbackup/client/Linux/RedHat2.6.18/ftp_to_client
openv/netbackup/client/Linux/RedHat2.6.18/sftp_to_client
openv/netbackup/client/Linux/RedHat2.6.18/ssh_to_client
openv/netbackup/client/Linux/RedHat2.6.18/client_config
openv/netbackup/client/Linux/RedHat2.6.18/cp_to_client
openv/netbackup/client/Linux/RedHat2.6.18/extract_java
openv/netbackup/client/Linux/RedHat2.6.18/version
openv/netbackup/client/Linux/RedHat2.6.18/pddeagent.tar.gz
openv/netbackup/client/Linux/RedHat2.6.18/pdinstall
openv/netbackup/client/Linux/RedHat2.6.18/nbcheck
openv/netbackup/client/Linux/RedHat2.6.18/PBX.tar.gz
openv/netbackup/client/Linux/RedHat2.6.18/installpbx
openv/netbackup/client/Linux/RedHat2.6.18/tar
openv/netbackup/client/Linux/RedHat2.6.18/client_bin.tar.gz
openv/netbackup/client/Linux/RedHat2.6.18/.sizes_client_bin
openv/netbackup/client/Linux/RedHat2.6.18/.sizes
openv/netbackup/client/Linux/RedHat2.6.18/NB-Java.tar.gz
openv/netbackup/client/Linux/RedHat2.6.18/.sizes_NB-Java
openv/netbackup/client/Linux/RedHat2.6.18/JRE.tar.gz
openv/netbackup/client/Linux/RedHat2.6.18/.sizes_JRE
openv/netbackup/client/Linux/SuSE2.6.16/
openv/netbackup/client/Linux/SuSE2.6.16/nbj.conf
openv/netbackup/client/Linux/SuSE2.6.16/install_client
openv/netbackup/client/Linux/SuSE2.6.16/ftp_to_client
openv/netbackup/client/Linux/SuSE2.6.16/sftp_to_client
openv/netbackup/client/Linux/SuSE2.6.16/ssh_to_client
openv/netbackup/client/Linux/SuSE2.6.16/client_config
openv/netbackup/client/Linux/SuSE2.6.16/cp_to_client
openv/netbackup/client/Linux/SuSE2.6.16/extract_java
openv/netbackup/client/Linux/SuSE2.6.16/version
openv/netbackup/client/Linux/SuSE2.6.16/pddeagent.tar.gz
openv/netbackup/client/Linux/SuSE2.6.16/pdinstall
openv/netbackup/client/Linux/SuSE2.6.16/nbcheck
openv/netbackup/client/Linux/SuSE2.6.16/PBX.tar.gz
openv/netbackup/client/Linux/SuSE2.6.16/installpbx
openv/netbackup/client/Linux/SuSE2.6.16/tar
openv/netbackup/client/Linux/SuSE2.6.16/client_bin.tar.gz
openv/netbackup/client/Linux/SuSE2.6.16/.sizes_client_bin
openv/netbackup/client/Linux/SuSE2.6.16/.sizes
openv/netbackup/client/Linux/SuSE2.6.16/NB-Java.tar.gz
openv/netbackup/client/Linux/SuSE2.6.16/.sizes_NB-Java
openv/netbackup/client/Linux/SuSE2.6.16/JRE.tar.gz
openv/netbackup/client/Linux/SuSE2.6.16/.sizes_JRE
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/nbj.conf
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/install_client
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/ftp_to_client
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/sftp_to_client
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/ssh_to_client
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/client_config
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/cp_to_client
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/extract_java
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/version
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/nbcheck
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/PBX.tar.gz
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/installpbx
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/tar
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/client_bin.tar.gz
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes_client_bin
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/NB-Java.tar.gz
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes_NB-Java
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/JRE.tar.gz
openv/netbackup/client/Linux/IBMzSeriesRedHat2.6.18/.sizes_JRE
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/nbj.conf
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/install_client
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/ftp_to_client
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/sftp_to_client
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/ssh_to_client
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/client_config
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/cp_to_client
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/extract_java
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/version
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/nbcheck
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/PBX.tar.gz
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/installpbx
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/tar
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/client_bin.tar.gz
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes_client_bin
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/NB-Java.tar.gz
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes_NB-Java
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/JRE.tar.gz
openv/netbackup/client/Linux/IBMzSeriesSuSE2.6.16/.sizes_JRE

Done executing NB.inst.

If you ran NB.inst instead of <cdrom_path>/install, you must
run /usr/openv/netbackup/bin/install_bp to initiate NetBackup.
Running /usr/openv/netbackup/bin/install_bp

Copying RedHat2.6.18 Client Binaries

Installing PBX...
Please wait while installation is in progress...
Installation completed Successfully
Installation log located here: /var/tmp/installpbx-5450-010414192000.log


Unpacking SYMCnbclt package.
Checking for pre-existing SYMCnbclt package.
Installing SYMCnbclt package.
Installation of SYMCnbclt was successful.
More details regarding SYMCnbclt can be found in file
/tmp/install_cltpkg_trace.5437 on nbu76.

Terminating NetBackup and/or Media Manager processes.

Installing NB-Java.

Unpacking SYMCnbjava package.
Checking for pre-existing SYMCnbjava package.
Installing SYMCnbjava package.
Installation of SYMCnbjava was successful.
More details regarding SYMCnbjava can be found in file
/tmp/install_javapkg_trace.6361 on nbu76.

Unpacking SYMCnbjre package.
Checking for pre-existing SYMCnbjre package.
Installing SYMCnbjre package.
Installation of SYMCnbjre was successful.
More details regarding SYMCnbjre can be found in file
/tmp/install_jrepkg_trace.6361 on nbu76.
+ /bin/cp ./nbj.conf /usr/openv/java

Directory /usr/openv/logs does not exist.
No log files to migrate.

Checking for SYMCpddes package...
Checking for SYMCpddea package...
Installing PDDE agent package (/usr/openv/netbackup/client/Linux/RedHat2.6.18/pddeagent.tar.gz)...
Extracting package SYMCpddea in /tmp/pdde_pkg_dir_6513.
   Package SYMCpddea extracted to /tmp/pdde_pkg_dir_6513.
Installing package SYMCpddea.
   Package SYMCpddea installed.
Installing PDDE server package (/usr/openv/pddeserver.tar.gz)...
Extracting package SYMCpddes in /tmp/pdde_pkg_dir_6513.
   Package SYMCpddes extracted to /tmp/pdde_pkg_dir_6513.
Installing package SYMCpddes.
   Package SYMCpddes installed.
PDDE install finished successfully.
Version now installed: 8.0001.0013.1029
Full PDDE installation log saved to: /var/log/puredisk/2014-01-04_19:22-pdde-install.log


The following automatic startup and shutdown scripts (respectively)
have been installed.  They will cause the NetBackup daemons to be
automatically shut down and restarted each time the system boots.

/etc/rc.d/rc2.d/S77netbackup
/etc/rc.d/rc3.d/S77netbackup
/etc/rc.d/rc5.d/S77netbackup
/etc/rc.d/rc0.d/K01netbackup
/etc/rc.d/rc1.d/K01netbackup
/etc/rc.d/rc6.d/K01netbackup


Installation of Java LiveUpdate agent succeeded.  Refer to file
/tmp/JLU-Log/JavaLiveUpdate-Install.log on nbu76
for installation details.


Checking LiveUpdate registration for the following products: NB CLT 
This may take a few minutes.

Product NB is installed and will be registered.
Product CLT_Linux-PSERIES is installed and will be registered.
Product CLT_Linux-ZSERIES is installed and will be registered.

Updating LiveUpdate registration now...this may take some time.



A NetBackup Server or Enterprise Server license key is needed
for installation to continue.

Enter license key: 
You must enter a license key for the installation to continue.


A NetBackup Server or Enterprise Server license key is needed
for installation to continue.

Enter license key: 
You must enter a license key for the installation to continue.


A NetBackup Server or Enterprise Server license key is needed
for installation to continue.

Enter license key: DDXD-DWWD-BR2Z-0904-O8O4-K333-2222-CPCP-20O

DDXD-DWWD-BR2Z-0904-O8O4-K333-2222-CPCP-20O:  
        NetBackup Enterprise Server Base product with all the features enabled
        has been registered.


All additional keys should be added at this time.
Do you want to add additional license keys now? [y,n] (y) n ----如果还有其他license就选y

Use /usr/openv/netbackup/bin/admincmd/get_license_key
to add, delete or list license keys at a later time.

Installing NetBackup Enterprise Server version: 7.6.0.1



If this machine will be using a different network interface than the
default (nbu76), the name of the preferred interface should be used
as the configured server name.  If this machine will be part of a
cluster, the virtual name should be used as the configured server name.

Would you like to use "nbu76" as the configured
NetBackup server name of this machine? [y,n] (y) ----选y 

Is nbu76 the master server? [y,n] (y) ----选y


Media servers can be added during this installation or
to a NetBackup environment after installation completes.
Refer to the NetBackup Administrator's Guide, Volume I for
more information.

Do you want to add any media servers now? [y,n] (n) ----默认

Checking network connections.
bp.conf: IP_ADDRESS_FAMILY = AF_INET: default value, no update needed


Sending SIGHUP to xinetd process.

Reloading configuration: [  OK  ]

Value YES for the NetBackup Product Improvement Program was saved in bp.conf.


NetBackup maintains a centralized catalog (separate from the image
catalog) for data related to media and device configuration, device
management, storage units, hosts and host aliases, media server status,
NDMP credentials, and other information.  This is managed by the
Enterprise Media Manager server.

Enter the Enterprise Media Manager server (default: nbu76): ----默认

Machine nbu76 is a master server, and it is the EMMSERVER.
Converting STREAMS files.  This may take a few minutes.

STREAMS files conversion is complete.


Successfully updated the session cache parameters.

Done processing parameter files, no files found to convert

Starting the NetBackup Authentication daemon.
Starting the NetBackup network daemon.
Starting the NetBackup client daemon.
Starting the NetBackup SAN Client Fibre Transport daemon.
Starting the NetBackup Discovery Framework.

Configuring nbatd.

Gathering configuration information.
Waiting for the security services to start operation.
Generating identity for host 'nbu76'
Unable to generate credentials for master server. Please check that the Symantec Product Authentication Broker is running on the master.
Optional VxSS libraries not initialized. 
Creating /usr/openv/tmp/sqlany

Installed SQL Anywhere Version 12.0.1.3873
Installation completed successfully


openv/wmc/
openv/wmc/war/
openv/wmc/war/netbackup.war
openv/wmc/war/nbwebservice.war
openv/wmc/config/
openv/wmc/config/index.html
openv/wmc/config/log4j.properties
openv/wmc/config/tomcat.logging.properties
openv/wmc/lib/
openv/wmc/lib/goodies.jar
openv/wmc/bin/
openv/wmc/bin/install/
openv/wmc/bin/install/configurePorts
openv/wmc/bin/install/configureWmc
openv/wmc/bin/install/configureWsDefaults
openv/wmc/bin/install/createSslStore
openv/wmc/bin/install/manageClientCerts
openv/wmc/bin/install/setupWmc
openv/wmc/bin/install/configureEnv
openv/wmc/webserver/
openv/wmc/webserver/LICENSE
openv/wmc/webserver/NOTICE
openv/wmc/webserver/RELEASE-NOTES
openv/wmc/webserver/RUNNING.txt
openv/wmc/webserver/bin/
openv/wmc/webserver/bin/bootstrap.jar
openv/wmc/webserver/bin/catalina-tasks.xml
openv/wmc/webserver/bin/catalina.sh
openv/wmc/webserver/bin/commons-daemon-native.tar.gz
openv/wmc/webserver/bin/commons-daemon.jar
openv/wmc/webserver/bin/configtest.sh
openv/wmc/webserver/bin/daemon.sh
openv/wmc/webserver/bin/digest.sh
openv/wmc/webserver/bin/setclasspath.sh
openv/wmc/webserver/bin/shutdown.sh
openv/wmc/webserver/bin/startup.sh
openv/wmc/webserver/bin/tomcat-juli.jar
openv/wmc/webserver/bin/tomcat-native.tar.gz
openv/wmc/webserver/bin/tool-wrapper.sh
openv/wmc/webserver/bin/version.sh
openv/wmc/webserver/conf/
openv/wmc/webserver/conf/catalina.policy
openv/wmc/webserver/conf/catalina.properties
openv/wmc/webserver/conf/context.xml.template
openv/wmc/webserver/conf/server.xml.template
openv/wmc/webserver/conf/tomcat-users.xml
openv/wmc/webserver/conf/web.xml.template
openv/wmc/webserver/lib/
openv/wmc/webserver/lib/annotations-api.jar
openv/wmc/webserver/lib/catalina-ant.jar
openv/wmc/webserver/lib/catalina-ha.jar
openv/wmc/webserver/lib/catalina-tribes.jar
openv/wmc/webserver/lib/catalina.jar
openv/wmc/webserver/lib/ecj-3.7.2.jar
openv/wmc/webserver/lib/el-api.jar
openv/wmc/webserver/lib/jasper-el.jar
openv/wmc/webserver/lib/jasper.jar
openv/wmc/webserver/lib/jsp-api.jar
openv/wmc/webserver/lib/servlet-api.jar
openv/wmc/webserver/lib/tomcat-api.jar
openv/wmc/webserver/lib/tomcat-coyote.jar
openv/wmc/webserver/lib/tomcat-dbcp.jar
openv/wmc/webserver/lib/tomcat-i18n-es.jar
openv/wmc/webserver/lib/tomcat-i18n-fr.jar
openv/wmc/webserver/lib/tomcat-i18n-ja.jar
openv/wmc/webserver/lib/tomcat-jdbc.jar
openv/wmc/webserver/lib/tomcat-util.jar
openv/wmc/webserver/webapps/
openv/wmc/webserver/webapps/ROOT/
openv/wmc/webserver/webapps/ROOT/RELEASE-NOTES.txt
openv/wmc/webserver/webapps/ROOT/WEB-INF/
openv/wmc/webserver/webapps/ROOT/WEB-INF/web.xml
openv/wmc/webserver/webapps/ROOT/asf-logo-wide.gif
openv/wmc/webserver/webapps/ROOT/asf-logo.png
openv/wmc/webserver/webapps/ROOT/bg-button.png
openv/wmc/webserver/webapps/ROOT/bg-middle.png
openv/wmc/webserver/webapps/ROOT/bg-nav-item.png
openv/wmc/webserver/webapps/ROOT/bg-nav.png
openv/wmc/webserver/webapps/ROOT/bg-upper.png
openv/wmc/webserver/webapps/ROOT/build.xml
openv/wmc/webserver/webapps/ROOT/favicon.ico
openv/wmc/webserver/webapps/ROOT/index.jsp
openv/wmc/webserver/webapps/ROOT/tomcat-power.gif
openv/wmc/webserver/webapps/ROOT/tomcat.css
openv/wmc/webserver/webapps/ROOT/tomcat.gif
openv/wmc/webserver/webapps/ROOT/tomcat.png
openv/wmc/webserver/webapps/ROOT/tomcat.svg

Creating WSL server certificate ...
set_value: Key "AZDBPasswordFilePath" successfully updated
AZ database setup complete.

Database server is NB_nbu76
Creating the NetBackup database.
Creating NetBackup staging directory in: /usr/openv/db/staging
Starting the NetBackup database.
Authenticating the NetBackup database.
VXDBMS_NB_DATA entry in bp.conf updated successfully.
Setting of database authentication for NBDB successful.
Change of dba password for NBDB successful.
Creating the NetBackup database files.
The NetBackup database files creation complete.
Creating the NetBackup database schema.
Verifying the running version of NBDB ...
NBDB version 7.6.0.0 verified.
Upgrading NBDB (7.6.0.0) to (7.6.0.1) ...
Re-verification of NBDB at new version, 7.6.0.1
Verification succeeded.
Successfully upgraded NBDB to version 7.6.0.1
Starting NBDB database self-tuning. This may take some time...
        Found 0 fragmented records in database.
NBDB database self-tuning is complete.
Database [NBDB] validation successful.
The NetBackup database creation complete.
Database [NBDB] is alive and well on server [NB_nbu76].
Creating the NetBackup Authorization database.
Creation of NetBackup Authorization database is complete.
Exiting from create_nbdb, status[0].

Migrating SLP definitions into the NetBackup relational database.


Starting the NetBackup Event Manager.


Starting the NetBackup Audit Manager.

Starting the NetBackup Deduplication Manager.
Starting the NetBackup Deduplication Engine.
Starting the NetBackup Deduplication Multi-Threaded Agent.

Starting the NetBackup database manager process (bpdbm).

Creating Directive Set for LotusNotes
Creating Directive Set for MS_Exchange_Mailbox
Creating Directive Set for MS_Exchange_Database
Creating Directive Set for MS_Exchange_Public_Folders
Creating Directive Set for MS_Exchange_Database_Availability_Groups
Creating Directive Set for MS_SharePoint_Portal_Server
Creating Template Set for Oracle_RMAN
Creating Template Set for Oracle_XML_Export
Creating Template Set for DB2
Creating Directive Set for Windows2003
Creating Directive Set for Windows2008
Creating Directive Set for Windows
Creating Directive Set for Enterprise_Vault_7.5
Creating Directive Set for Enterprise_Vault_8.0
Creating Directive Set for Enterprise_Vault_9.0
Creating Directive Set for Enterprise_Vault_10.0
Creating Directive Set for NB_SearchServer
Creating Directive Set for NDMP

Converting snapshot policies:

Policy conversion summary:
        Number of original policies:                    0
        Number of non-snapshot policies skipped:        0
        Number of policies not needing conversion:      0
        Number of policies converted to
          'auto' snapshot method:                       0
        Number of policies converted:                   0

Updating client hardware definitions:

Hardware update conversion summary:
        Number of policies processed:                         0
        Number of policies with affected clients:             0
        Number of clients processed:                          0
        Number of clients converted:                          0
        Number of Disaster Recovery flags cleared:            0

Starting the NetBackup compatibility daemon.
Starting the NetBackup Enterprise Media Manager.
Starting the NetBackup Resource Broker.

Populating the database tables.  This will take some time.

Starting the Media Manager device daemon processes.

Do you want to start the job-related NetBackup daemons
so backups and restores can be initiated? [y,n] (y) Starting the NetBackup request daemon process (bprd).
Starting the NetBackup Job Manager.
Starting the NetBackup Policy Execution Manager.
Starting the NetBackup Storage Lifecycle Manager.

Starting the NetBackup Remote Monitoring Management System.
Starting the NetBackup Key Management daemon.
Starting the NetBackup Service Layer.
Starting the NetBackup Indexing Manager.
Starting the NetBackup Agent Request Server.
Starting the NetBackup Bare Metal Restore daemon.
Starting the NetBackup Web Management Console.
Starting the NetBackup Vault daemon.
Starting the NetBackup CloudStore Service Container.
Starting the NetBackup Service Monitor.
Starting the NetBackup Bare Metal Restore Boot Server daemon.

Indexing Server upgrade operation is not required.

Updating policy identifiers:

Policy identifier update summary:
        Number of policies processed:                                 0
        Number of policies with duplicate identifier:         0
        Number of policies with empty identifier:                     0
        Number of policies with affected identifier:          0


OpsCenter is the next-generation monitoring, reporting and
administrative solution designed to centrally manage one or
more NetBackup installations from a web browser.  Existing
NetBackup Operations Manager or Veritas Backup Reporter
installations can be upgraded to OpsCenter.

If an OpsCenter server already exists in your environment
or you plan to install one, enter the real hostname of that
OpsCenter server here.  Do not use a virtual name.  If you
do not want this local machine to be an OpsCenter server,
enter NONE.

Enter the OpsCenter server (default: NONE):  ----直接回车


NetBackup server installation complete.




File /usr/openv/tmp/install_trace.4634 contains a trace of this install.
That file can be deleted after you are sure the install was successful.

至此，nbu 7.6.0.1版本安装完成。纵观安装过程，和 nbu 7.5的安装基本一致。

[root@nbu76 ~]# cd /usr/openv/netbackup/
[root@nbu76 netbackup]# ls
baremetal  bp.conf  db     ext   logs        nblog.conf.template  nbsvcmon.conf       sec    version   vfm_master.conf
bin        client   dbext  help  nblog.conf  nblu.conf.template   nbsvcmon.conf.lock  vault  vfm.conf
[root@nbu76 netbackup]# cat version 
HARDWARE LINUX_RH_X86
VERSION NetBackup 7.6.0.1
RELEASEDATE Wed Nov 13 14:13:12 CST 2013
BUILDNUMBER 20131113
[root@nbu76 netbackup]# cat bp.conf 
SERVER = nbu76
CLIENT_NAME = nbu76
CONNECT_OPTIONS = localhost 1 0 2
USE_VXSS = PROHIBITED
VXSS_SERVICE_TYPE = INTEGRITYANDCONFIDENTIALITY
EMMSERVER = nbu76
HOST_CACHE_TTL = 3600
VXDBMS_NB_DATA = /usr/openv/db/data
TELEMETRY_UPLOAD = YES